Tender For Supply, Installation, Commissioning, Testing Of 01 No. 16 M Galvanized Led High Mast Light, Cabling Etc And Repairing 45 Nos. Led Lights At Nmy Achhnera
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 May 2026
0 days left
EMD
66000
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Achhnera → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Commissioning, Testing Of 01 No. 16 M Galvanized Led High Mast Light, Cabling Etc And Repairing 45 Nos. Led Lights At Nmy Achhnera
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of 16M high mast pole of approved makewith rising system hot dip galvanised inside & out sidehaving pole sheet thickness 4mm top dia minimum 150 mm, bottom dia minimum 380mm, base plate 32mm thick, suitable for wind velocity as per IS 875part 3 and having no cercumferential weld with aaccessories for high mast such as head frame suitable for 6 luminaries and its controll gear boxes, 1.5HP Power tool motor, 3 point suspension with steel wire rope 6mm dia double drum winch including making suitable foundation as per manufacture drawing and site requirment along with foundation bolts, nuts, washers, anchor plates etc complete in all respect as per direction and satisfaction to the engineer incharge. 21.3.1 |
| 2 | Supply & fixing of factory wired integral LED fiood light luminaires with die cast Aluminium housing built with driver set suitable for 170 to 200 watt. Confiming to IP 66 Protection complete in all respects. lavaur 18700-22000 system lumens high powar LED with lenses >110m/w,PF>0.95THD<10% at Full load CRI>70,Pottde driver set (Not circuitory) Phase to Phase Protection at 440v&>300v auto cut and restart Feature with 5 years warrantee. CAT-AAA 23.26 |
| 3 | Supply and burying of 40safe earthing electrodT-19 (Hot dip galvenised),Length up to 2000 mm,outer pipe 50 mm ,inner pipe 25 mm , terminal dia 12 mm outer GI pipeof 16 swg and inner GI pipe of 12 swg with hot dip galvanization up to 100 micron filled with crystline conductive mixture (CCM) having anti corrosive and conductive properties with 50 Kg s activated soil (BFC) caple of reducing the soil resistivity with good mixture of retaining capacityalong with 30 cm square CI frame with hinged cover and massonaries housing (from electrode terminal to switch board , cost of 25x3 mm GI stripe will be extra) 725 A |
| 4 | Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects. 716 |
| 5 | Supply and fixing of 25 Amp. TPN of automatic street light cubicle control panel painted with anty corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case TPN, complete in all respect. 807-e-ii |
| 6 | GI pipe 80 mm dia( Mideum Class) DSR (E/M) 2022 SI No -2833 |
| 7 | Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect. 409 |
| 8 | Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 16 sq. mm. 4 core cable. 20c1.9 |
| 9 | Supply and fixing of brass nickel plated compression gland for PVC insulated and armored served sheathed under ground cable i/c rubber ring etc. Complete in all respects. The armoring of the cable shall be properly connected with the earth as per direction of E/ I. 16 Sq mm 4 Core 503i |
| 10 | S&F of 100 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. 346 |
| 11 | Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per direction of E / I. 16 Sq mm 504D |
| 12 | Dsmentling of led light Appr. |
| 13 | Refixing of Led light Appr. |
| 14 | S/F of led potted driver Appr. |
| 15 | S/F of spd Appr. |
| 16 | S/W of sub main 2.5 sq mm SI 289 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMay 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender