|
| 1 | Earth work in excavation in hard soil or gravelly soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with coarse sand well watered and rammed including cost,carriage & royality of the sand including cost of all labour & T&P required for the work etc. complete. |
| 3 | Cement concrete of proportion (1:4:8) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect. |
| 4 | R.C.C. work of prop.(1:1½:3) in following works using 12mm to 20mm (½” to ¾”) size (20mm not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect Column Base |
| 5 | Plinth Beam |
| 6 | Lintel beam |
| 7 | Super Structure & Beam |
| 8 | Chajja |
| 9 | Roof slab |
| 10 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 11 | Plain cment concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour, cess and T&P etc. required for the work complete. |
| 12 | Fly Ash brick masonry in cement mortar (1:6) in F & P using fly ash bricks of 25cm x 12cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors. [Vide AR(P) 71 item No.3]Brick Work in Foundation |
| 13 | Brick Work in Super structure |
| 14 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete. |
| 15 | 12mm (1/2\\") thick cement plaster (1:4) over brick work after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 16 | Supplying & Fixing MS Grill work of size minimum 12mm squre bar with 4mm steel sheet in Door & Window ,Boundary etc, having vertically 4\\" maximum center to center distance of squre bars & horizentally 8\\" to 12\\" c/c distance of Squre bar with approved two coat of enamel paint over a cote of red oxide primer, including all charges. complete as per the direction of Engineer-in -charge |
| 17 | Wall painting two coats with plastic emulsion paint of approved shade on old work including cost of paint. Data for 10 Sqm |
| 18 | Painting one coat with weather seal paintincluding cost, conveyance, taxes of all materials, labour and T&P etc. complete |
| 19 | Recessed wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked make: Finolex/Anchor/Polycab/Havells/RR Kabel/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked make: AKG/BEC/Precision/Presto/Anchor/Kinjal, 6A modular type (flame retardant type) switch ISI marked make: Schneider (Zencelo)/Legrand (Myrius)/Panasonic (Vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retardant type). Modular box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-Charge. All switches & sockets should be warranted for a replacement period of 2 years against defects with necessary test report & warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materialsGroup-A |
| 20 | Group-B |
| 21 | Group-C |
| 22 | Supplying, fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) (flame retardant type) & other required accessories of ISI marked as approved as per direction of Engg.-in-Charge. Make: Schneider (Zencelo)/Legrand (Myrius)/Panasonic (Vision). (Maximum 02 nos point in one circuit). All switches & sockets should be warranted for a replacement period of 2 years against defects with necessary test report & warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials |
| 23 | Supplying, fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket (modular type) (flame retardant type) with suitable size modular box & cover (flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of Engineer-in-Charge. Make: Schneider (Zencelo)/Legrand (Myrius)/Panasonic (Vision) (For equipment power). All switches & sockets should be warranted for a replacement period of 2 years against defects with necessary test report & warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials |
| 24 | Supplying, fixing of 2x6A Plug on the separate board with complete fitting by 2 nos 6A switch & socket (modular type) (flame retardant type) with suitable size modular box & metallic cover plate (both side) (flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of Engineer-in-Charge. Make: Schneider (Zencelo)/Legrand (Myrius)/Panasonic (Vision) (For equipment power). (Maximum 02 nos point in one circuit). All switches & sockets should be warranted for a replacement period of 2 years against defects with necessary test report & warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. (Used for those computers without printer) |
| 25 | Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make: Finolex/Anchor/Polycab/Havells/RR Kabel/KEI in recessed HMS FRLS PVC conduit of mentioned size Make: AKG/BEC/Precision/Norpack/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuity conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT) (2x1.5+1x1.5) |
| 26 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuity conductor in 20 mm dia non metallic heavy duty conduit (BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT) (2x2.5+1x1.5) |
| 27 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuity conductor in 20 mm dia non metallic heavy duty conduit (PDB to PSB/POWER POINT/AC POINT) (2x4+1x1.5). |
| 28 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuity conductor in 25 mm dia non metallic heavy duty conduit (LFDB to LDBB/UDBB) (2x6+1x2.5). |
| 29 | 1 no single core 1.5 sq. mm copper wire for phase conductor in 20 mm dia non metallic heavy duty PVC conduit (LDB to LSB/5A SOCKET) (1x1.5 sq. mm) (for inverter wiring). |
| 30 | Supplying & fixing of Bakelite angle holder/batten holder (Make: Anchor/Havells or equivalent reputed make A category ISI marked as approved) conforming to IS 1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge. All components should be warranted for a replacement period of 2 years against defects with necessary test report & warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials |
| 31 | Supplying & fixing of 10W LED Bulb including all connections and accessories with 2 years warranty i/c connection etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/L&T/Havells/Philips/Wipro/Crompton/Bajaj category ISI marked as per direction Engineer-in-Charge). |
| 32 | Supplying, installation of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make: Havells/Crompton/Usha/Orient/Bajaj) in the existing wall, including fixing & connection as required as per direction of Engg.-in-Charge. Replacement warranty will be 2 years |
| 33 | Supplying, installation, testing and commissioning of 1200 mm sweep white/milky colour ceiling fan with aluminium blades having wattage not more than 60W and air delivery ≥215 m³/min Make: Usha Striker or equivalent model of Crompton/Havells, including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge. Replacement warranty will be 4 years. (Regulator compatible) |
| 34 | SITC of energy efficient LED tube light fittings with decorative aluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/L&T/Havells/Philips/Wipro/Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years |
| 35 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required as per direction of Engg.-in-Charge.(Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) of ISI mark as approved |
| 36 | Supply and fixing of 8 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator). Warranty on DB is 3 years |
| 37 | Supplying and fixing 6–32 Amps rating, C series, 10KA breaking capacity, SP, 230 volts MCB. Make: LEGRAND-DX3 / Siemens-Betaguard / Schneider-Acti 9 / C&S in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. The MCB should be replacement warranty will be 3 years |
| 38 | Supplying and fixing 32 amps rating, 240 volts, C series, 10KA breaking capacity, Double poles MCB of Make: LEGRAND-DX3 / Siemens-Betaguard / Schneider-Acti 9 / C&S in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be replacement warranty will be 3 years |
| 39 | Supplying and fixing 63A TPN Main Switch of Havells/Anchor/HPL/L&T/Equivalent make including all connections and accessories as required |
| 40 | Earthing Supply and fixing of Earthing with G.I earth pipe 3 mtr long, 40 mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 41 | Providing and fixing SWG 8 GI wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge |
| 42 | Sinking of 125 x 100mm dia Production well having 60mtr. Depth.Supplying all Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).Labour for drilling of 125x100 mm dia bore |
| 43 | Supplying all materials, labour, T&P and Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.( lowering of 125 mm dia PVC/GI Casing Pipes) |
| 44 | Supplying all labour, T&P and Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 45 | Supplying, installation, testing & commissioing of single phase vertical submersible pump sets having discharge 1.00 LPS against total head 60.00 mtr of reputed make including cost of pump motor, conveyance and labour cess etc. all complete as per the direction of the Engineer-in-Charge. (including standby) |
| 46 | Supplying fitting fixing of Star delta & DOL control pannel including cost of all materials and labour cess etc. all complete as per the direction of the Engineer-in-Charge. |
| 47 | Supplying all materials, labour T&P and lowring of 25.00mm dia HDPE pipe (10kg/cm²) in to the bore well ncluding cost of all materials and labour cess etc. all complete as per the direction of the Engineer-in-Charge. |
| 48 | Supplying & fixing of 2.5sqmm size 3 core PVC insulated copper flat Cable for submersible pump set of reputed make including cost of all materials and labour cess etc. all complete as per the direction of the Engineer-in-Charge.. |
| 49 | Supplying & fixing of M.S. Clamp, M.S. Cover and lowering charges including cost of all materials and labour cess etc. all complete as per the direction of the Engineer-in-Charge. (PR) |
| 50 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/ 89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor including cost of all materials, conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge.25mm dia ASTM-D-1785/ 89 (Sch-80) pipe |
| 51 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes etc all complete as per direction of Engineer-in-charge.110mm OD P.V.C. SWR S/S Pipe (ISI type-B) |
| 52 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc all complete as per direction of Engineer-in-charge.110 mm dia P.V.C. SWR plain bend 87.5' |
| 53 | 110mm diaP.V.C. SWR door bend 87.5' |
| 54 | 110mm dia P.V.C. Nahani Trap with out Jally |
| 55 | 110mm diaP.V.C. SWR S/J with door. |
| 56 | 110mm diaP.V.C. SWR Vent Cowl. |
| 57 | 75mm diaP.V.C. SWR door bend 87.5' |
| 58 | Supplying & fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge.1500 litre capacity three Layer Cylinderical Vertical water storage tanks (White Coloured) |
| 59 | Supplying all materials, labour, T&P & fitting, fixing of the following P.H. & Sanitary fixtures of reputed make including labour cess etc. all complete as per Specification & direction of the Engineer-in-Charge.Supplying all materials, labour, T&P & fitting, fixing of the following P.H. & Sanitary fixtures of reputed make including labour cess etc. all complete as per Specification & direction of the Engineer-in-Charge.25mm dia Brass G.M. Full way Valve. |
| 60 | 15mm dia C.P. short body bib cock+C.P. flange(Big)+C.P. extension piece-3\\" |
| 61 | 15mm dia C.P.angular stop cock+C.P. flange(Big) +C.P. extension piece-3\\" |
| 62 | 15mm dia C.P concealed stop cock+C.P. extension piece-3\\" |
| 63 | Universal EWC S Trp (575 x 405 x 395mm) (Parryware) |
| 64 | 10 litr pvc low level cistern with fittings |
| 65 | Wash Basin with full pedestal Perrayware make (Sophia s (510 x 420m x 180mm+Pedestal Long (175 x 185m x 715mm ) Perryware make) |
| 66 | Jaquare Pillar Cock with 190mm Extension -35021PM |
| 67 | C.P. waste. (32mm - Small) |
| 68 | 32mmx 1150mm long PVC waste pipe |
| 69 | 15mmx450mm PVC connection pipe |
| 70 | Soap Dish. |
| 71 | C.P. Towel Ring. |
| 72 | Mirror Size 630mm x 445mm. |
| 73 | C.P. Glass Shelf. |
| 74 | C.P. Corner Shelf 10.50 (Eco Hifi). |
| 75 | C.P. Health foucet with 1.00 mtr PVC Tube. |
| 76 | C.P. 2 way bib coco with wall flange. |
| 77 | Jaquar Shower Arm 20mm dia & 600mm long. |
| 78 | Construction of 20 Users septic Tank (Inside size 2.50m x 1.30m x 3.00m depth) (Annexture) |
| 79 | Supplying all labour, T&P & materials for construction of I. C. Chamber of Internal of following size with C.C (1:3:6) using 4cm size ,K.B brick work (1:4),C.C (1:2:4) using 12mm size c.b.hg chips. For benching & channeling ,12mm thick C.P (1:4) with punning inside ,16mm thick C.P(1:6) out side, providing 0.125mtr thick RCC cover slab with C.C (1:1.5:3) using 12mm size c.b.h.g chips with reinforcement excluding earth work excavation in all kinds of soil, sand filling, cost of conveyance & royalty taxes & labour cess etc all complete as per direction of the Engineer-In-Charge.I.C:- 750mm x 750mm x 600mm depth = |
| 80 | Supplying all materials, labour,T&P for construction of 1.20m internal dia & 2.60mtr depth soak way pit with dry brick walling upto 1.80mtr height & Fly Ash brick masonary in cm (1:4) for the remaining 0.70mtr height of Wall at top, 12mm C.P (1:4) inside & out side 0.70cm inside fillied with Brick khoa of 40mm for as height or 1.90mtr from bottom covered by 10cm thick precast RCC slab using C.C (1:1.5:3) in 12mm size c.b.h.g chips including excavation or earth in all kinds soil, sand filling, laying C.C. (1:4:8) with 4 cm size c.b.h.g metal of 10 cm thick & filling the excavated earth and labour cess etc all complete as per direction of the Engineer-In-Charge.Soakpit of Internal size -1.20mdia x 2.60mtr depth Please Enable Macros to View BoQ information |
