|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C . |
| 2 | Supplying and fixing of 20 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 3 | Supplying and drawing 3x2.5sq.mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 4 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 5 | Supplying and fixing 40 A, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 6 | Supplying and fixing DP sheet steel enclosure on surface/ recess along A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 7 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 8 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 9 | Supply and fixing of aluminium conductor pvc insuinsulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thinck sand all around and protected with burnt bricks sides and on top. On surface the the cable run shall be fixed on M.S. clamps etc. of suitable size ro as directed by the Engineer Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sq. mm 2 core |
| 10 | Supply and erection of 200 Amp. TPN RisingMains complete with top end cover plate etc. On angle iron wall brackets complete in all respect. |
| 11 | S&F of 200 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 12 | Installation charge of electric pole and solar pole (Labour Rate). |
| 13 | Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CATAA |
| 14 | Decorative UP Down Light- Supply of 18 Watt, LED Luminaire (Ceiling Light), Round, 150 mm, Recessed type. |
| 15 | Supply of Decorative Lighting Pole of Cast Iron with Dual Arm, with Base Plate (suitable for grouting) and Mounting Plate, Length of the Arm 1000 mm, Height of Pole 4 meter. |
| 16 | Supply of 12 watt white-led based solar street lighting system with 30 ah battery capacity, IP 65, Minimum Power output of PV Module 75 Wp, Minimum Battery Voltage 12.8 V,Height of Decorative pole 6 meter. |
| 17 | Supplying and fixing of LED Garden Light 30. Please Enable Macros to View BoQ information |
