|
| 1 | Dismantling fencing wire mesh,any type complete all as directed by Engineer-in-Charge. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embeded concrete brick etc complete all as directed by Engineer-in-Charge. |
| 3 | Excavation in post holes (for similar holes) each not exceeding 0.5 CUM getting out soft/ loose soil, returning filling, in and ramming earth or broken mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surface in soft loose soil complete all as specified.Note: Returning filling and Removing of surplus soil are deemed to be included in this item. |
| 4 | Material and labour for plain cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in foundations, filling and mass concrete complete all as specified. |
| 5 | Supply and fix MS section for post and struts in fencing including cutting tops to shape as directed drilling holes etc and simmilar work including all nesecery work conforming to FE-290 Gde E-165 complete all as specified and as directed. |
| 6 | Supply and fix mild steel screw bolts (machine made) of dia 16-20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long complete all as specified and directed. |
| 7 | Fixing only chainlink fencing incl line wire any mesh size and type of any type of standard, rails, straining bolts etc. including provision of binding wire. |
| 8 | Supply only M.S Galvanised chain link fencing any size or type. Note: (a)The sample only be approved by GE after physical check.(b) The contractor shall produce necessary test certificate for galvanised coating and without the same no payment shall be made to the contractor. |
| 9 | Supply and fix for MS flats to receive expanded metal or fabric etc and staining with welding complete all as specified. |
| 10 | Supply and fix 10 mm dia of mild steel round bars for holding chain link fencing conforming to Fe-410-s or Fe 410-0, cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends complete. |
| 11 | Material and labour for prepration new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 12 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces.Make: Berger (Silk)/ Dulux (Velvet Touch)/ Shalimar Paints Ltd (Superlac Stay clean)/ Asian Paints Ltd, (Royal Aspira)/ Nerrolac Paints Ltd (Impression) |
| 13 | Material and labour for 100 mm thick Cement concrete type B2, 1:2:4 using 40mm graded crushed stone aggregate as in Sub-Floors, Sub-Bases, Floors and pavings, plinth protection, etc all as specified. |
| 14 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided complete all as directed by Engineer-in-Charge. |
| 15 | Demolition of Brickwork or stone/ boulder masonry, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as directed by Engineer-in-Charge. |
| 16 | Material and labour for Cement concrete 1:4:8 type C2 using 40 mm graded crushed stone aggregates as in foundations, filling and mass-concrete complete all as specified. |
| 17 | Material and labour for walling random rubble uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 as in retaining walls, wing walls, abutment and the likes complete all as specified. Note: Precast PCC bond stone will be measured and paid seperarely against item here-in-after |
| 18 | Material and labour for providing, precast cement concrete 1:3:6 type C1 using 20 mm graded crushed stone aggregates as in, bond stone for stone walling, set in cement mortar 1:4 complete with joints to match complete all as specified. |
| 19 | Supply and fix 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls as in weep holes including all fittings i.e. junction, Tee, bend if required. Complete all as specified. |
| 20 | Material and labour for providing, cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in , copings, and as directed by Engineer-In-Charge. |
| 21 | Extra over stone walling, random rubble brought upto courses, for hammer dressing to face stones and dressing of face beds and joints, with maximum depressions on face from straight edge held against the dressed surface not exceeding 40 mm on lime or sand stone complete all as specified. |
| 22 | Material and labour raised pointing to random or polygonal rubble, uncoursed in cement mortar 1:4 on brought upto courses complete all as specified. |
| 23 | Demolition of Cement Concrete (Un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 24 | Demolition of Cement Concrete (Un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
