|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Earth work in surface excavation not exceeding 15 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 5 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) excluding testing of joints etc. complete : (a)300 mm dia. R.C.C. pipe |
| 6 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 250 to 300 mm diameter. |
| 7 | Constructing brick masonry circular road gully chamber of 560mm internal dia and depth 90 cm with FPS bricks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse sand) over a bed of cement concrete 15 cm thick and 115 cm dia of cement concrete 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) inside cement plastering of 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement on walls and floors including providing SFRC gully grating cover and frame (560mm Internal dia) confirming to specification of SFRC cover and frame to I.S: 12592 part-I & II 1988 with upto date amendment including fixing and embedding the frame in 150mm thick cc 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete as per direction and satisfaction of Engineer-in-charge. |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift. |
| 9 | Raising/lowering manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : Rectangular /circular manhole of existing size with circular cover of same as existing dia and grade. |
| 10 | Raising brick masonry road gully chamber with cover and frame of Square/round Gully chambers to required level including dismantling existing cover & frames, FPS bricks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse sand), inside cement plastering of 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement on new brick work, providing RCC gully grating cover and frame (round or square as required) including fixing and embedding the frame in 150mm thick cc 1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete as per direction and satisfaction of Engineer-in-charge. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 20 mm nominal size Recycled Aggregate (RA) ) |
| 12 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculat volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 13 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 14 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 4 coarse sand) |
| 15 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 16 | Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. bituminous portion |
| 17 | Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, trasporting and unloading the same at any C&D waste management site within 25 kms. Lead i.e. shastri park/Burari / Mundka including weighing at plant etc. complete as per direction of Engineer in Charge. Weighing and unlading at the plant shall be as per procedures/ rules of the C&D Waste Plant. The processing fee of C&D management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash reciepts. |
| 18 | Purchase and taken away of old GT cover and frame including removal of same from the site. Nothing extra shall be paid for carriage, lifting etc. complete as per the directions of the Engineer-in-charge. |
| 19 | Purchase and taken away of Old RCC grating including removal of same from the site. Nothing extra shall be paid for carriage, lifting etc. complete as per the directions of the Engineer-in-charge. Please Enable Macros to View BoQ information |
