|
| 1 | Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each complete all as specified and as directed |
| 2 | Taking down shutter of any description n exc 1 Sqm each complete all as specified and as directed |
| 3 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed |
| 4 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed |
| 5 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directionsof Engineer-in-Chief. |
| 6 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge. |
| 7 | S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed. |
| 8 | S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed |
| 9 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete. |
| 10 | S&F pressed steel frames (size 105x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 11 | S&F pressed steel frames (size 125x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 12 | M&L for providing plain cement concrete 1:3:6 Type C-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame. |
| 13 | S & F 35 mm thick second class hard wood, Flush shutters, solid core construction, with block board core and plywoodface panels, commercialmtype on both sides complete all as specified and directed. |
| 14 | S& F 35mm thick glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc. edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze. Note: glazing/ gauzing will be measured separately |
| 15 | S&F 12 mm thick prilaminated partical boad exterior grade laminated on both side with decorative choice lamination fixed to aluminium frame work for door panel shutter complete all as specified and directed. |
| 16 | S&Faluminium(extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg all as specified. MAKE : Godrej or Equivalent. |
| 17 | S&F in repairs aluminium(extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg all as specified. MAKE : Godrej or Equivalent. |
| 18 | S&F of brass 4 Levers Mortice lock, vertical type, size 100mm |
| 19 | S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 20 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. |
| 21 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified. |
| 22 | S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long. |
| 23 | Material and labour PCC 1:2:4 type B1 using 20 mm graded aggregate for bed blocks for securing hold fast and the like including weathering, sligtly rounded or chamfered angles and throating, with necessary formwork complete all as specified and as directed. complete all as specified and as directed. |
| 24 | S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate and complete all as specified. |
| 25 | S&F 150 mm long floordoor stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty complete all as specified and as directed. |
| 27 | S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 28 | S&F frosted or ground/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed |
| 29 | S & F sheet glass of 5.50mm thick selected quality in square and exceding 0.5 Sqm in each pane. |
| 30 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 31 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 32 | M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 33 | S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and directed. |
| 34 | Material and labour for preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer on newly treated steel surfaces of any description, etc complete all as specified and as directed. |
| 35 | Dismantling boarding of any description, fixed in any position fixed with nails |
| 36 | M&L block boards 18/19mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified. |
| 37 | M&L block boards 12 mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified. |
| 38 | M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified. |
| 39 | S&F of 100mm brass Hasp and staple, safty type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed. |
| 40 | M&L in repair 2nd class hardwood Plain fillets (50x50) Exc 13 & n.exc 25 Sq.cm, square, rectangular or triangular in section, clean sawn, secured with screws or nails or brads complete all as specified and directed. |
| 41 | S/F of 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished |
| 42 | S/F of Stainless steel butt hinges 75 mm long wih screw |
| 43 | S&F standard quality magnetic catcher for cupboard shutters. |
| 44 | S&F in repairs 25mm thick curtain rod stainless steel fancy type complete all as specified and as directed |
| 45 | S&F in repairs fancy type brackets with knobs suitable for 25mm dia stainless steel curtain rod including stay & side clamp as reqd at site complete all as specified and as directed |
| 46 | S&F in repairs Door seal (Snake guard) with Aluminium frame complete all specified |
| 47 | Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar . |
| 48 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 49 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 50 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed |
| 51 | S&F in repairs of 600x450 mm bevelled adge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wdn plug with cromium plated brass screws and cup washers atc complete all as specified and directed. |
| 52 | S&F in repairs glass corner/ mirror shelves size 300/450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and directed. |
| 53 | S&F in repairs PVC Cabinet of size 600mm x450mm with necessary fittings and hinges complete all as specified and directed. |
| 54 | S&F in repair Stainless Steel Dish/plate Display Rack of size 750x600x250mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rowel plugs amd brass screws at suitable places, etc complete all as specified and as directed. Make: Prayag, Cat No: P-330 or Silver shine, Cat No: SSKPR-311 or any Equivalent |
| 55 | Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed. |
| 56 | Taking down cement plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 57 | M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed. |
| 58 | M&L for plastering in internal wall surfaces of 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge. |
| 59 | M & L for two coats of oil bound distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed by Engr -in- charge. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
