|
| 1 | IP 42 Wall/column Mounted distribution board with one Nos of 63A 4P MCB and 2 Noss 32A TP MCB / 6 Noss. 32A SP MCB as outgoing (4 way TPN DB) |
| 2 | IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 8 Noss 6A/10A SP MCB as outgoing (12 way SPN DB) |
| 3 | 1st category Al armoured cables FRLS outer sheathed- 3.5C x 35 Sq.mm |
| 4 | 1st category Al r armoured cables FRLS outer sheathed- 4C x 16 Sq.mm |
| 5 | Submains FRLSH Casing N Caping - 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire in 20 x 12 mm (1/2\\") |
| 6 | Submains FRLSH Casing N Caping - 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20 x 12 mm (1/2 in) |
| 7 | Light /Fan / Ex. fan Points Concealed Manner with Modular switches & FRLSH wires |
| 8 | Supply and laying Raceways / Conduits 100mm X 40mm Aluminium raceways, 2 mm thick. |
| 9 | 50mm x 50mm x 50mm size GI Junction box with kNosck out & 10Amp. Connector block /strip |
| 10 | Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation |
| 11 | Fan safety rope/ Fan wire. |
| 12 | S' type M.S. fan hook fabricated from suitable dia. M.S. rod for fixing ceiling fan by using pair of Anchor fastener. |
| 13 | Fixing of Ceiling fans Upto 0.5 Mtr |
| 14 | 15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch |
| 15 | INDOOR LED FIXTURES - -LED Square Recessed Downlighter- 45W (600x600) |
| 16 | Switch BOX point for computers through Casing-Capping Description of Item8Modular SURFACE BOX - 1 No.8Modular PLATE - 1 No.INDICATOR LAMP - 1 No.15A SWITCH - 1 No.6A 5 PIN SOCKET - 3 Nos.2Modular SURFACE BOX - 1 Nos.2M PLATE - 1Nos.RJ11 SOCKET - 1 Nos.RJ45 SOCKET - 1Nos. |
| 17 | 25 mm.- Only PVC Conduits |
| 18 | SITC of Push button telephone instrument desk top/ wall mount unit |
| 19 | PVC Telephone Cable -2 pair |
| 20 | PVC Telephone Cable -20 pair |
| 21 | SITC of 24 ports 10/100/1000 with 2 combo ports PoE switch |
| 22 | 24 Port patch Panel |
| 23 | Cat 6 Gigabyte |
| 24 | 3 Feet Patch Chord |
| 25 | SITC of 19 inch Rack |
| 26 | SITC of 9 inch Rack |
| 27 | 2/3 Pin Independent Plug (IP) |
| 28 | Bell Point with Bell / Buzzer & 1 Bell Push |
| 29 | Bell Point With Bell / Buzzer with 1 Bell Push & 1 Indicator |
| 30 | Exhaust fan of 230mm sweep, 1400RPM, with 450 CFM free air delivery, AC 230V/415V , 50 Hz, single phase / three phase complete with all necessary accessories for completing installation . |
| 31 | P/F partition upto ceiling height consisting of G.I. frame and required board: 100 mm overall thickness partition with 12 mm thick double skin 6mm thk. Commercial plywood. |
| 32 | STAFF OFFICE TABLE 1800 x 900 x 750 |
| 33 | Staff Table (2100mm x 900mmx 750mm) |
| 34 | Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. complete. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edgebanding of required size etc. Hardware set to include 110 degree opening self- closing box hinges,Counter Sunk screw, S.S.Brush Finished, Handles L’ ClipsSelves support. Multipurpose lock, Levelling Bolt with inserts etc.complete Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing provided by architect,suitable locking provision. Execution of this item should be make as per the instructions of Achitect in Charge. 1200 x 500 x 750 |
| 35 | M.S. Storage size |
| 36 | M.S. Pedestel |
| 37 | Supply & Installation of aluminum false ceiling sheets along with grid work |
| 38 | Mid Back seating |
| 39 | VISITOR CHAIR |
| 40 | Fire rated Single leaf Door - Laminate Finish: PnF of Wooden Fire door without Panic Bar of appd make and of required size, 120 minutes fire rating, integrity and insulation in accordance with the criteria of BS 476 ; Part 22 : 1987 and report 212 (1)/FR/2003; Insulation on door leaf only. Tested at Fire Research Lab, CBRI, Roorkee with standard heating conditions as specified in IS : 3809-1979 and BS : 476 part 20 & 22, 1987 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temp rise on the non fire side to the max of 140 deg Centi above the ambient temp on the unexposed surface of the shutter). Red Mirranti Hard wood frame of section 145mm x 70mm with Intumescent strip (Imported) to take care of Hot and cold smoke of size 10mmx2mmx2Nos. Concealed in the grove of the frame and 55mm thick single leaf shutter made out of perimeter railing of Red Mirranti wood of size 100mmx29mm and promina 60.9mm thick Calcium Silicate Board Fire Retardant compound on each side coated with Intumescent sealant and faced with 4mm thick marine ply with Fire and smoke Intumescent Seal of size 20mmx2mmx1No.,mounted in the grooves in the shutter on all sides except bottom with 10mm |
| 41 | Dark coloured glazed vitrified tiles |
| 42 | Dark coloured glazed ceramic tiles for height upto 300mm |
| 43 | Providing and applying 12 mm thick internal plaster in cement mortar 1:3 with neeru finish at all heights and locations in one coat for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete. |
| 44 | Removing the old plaster and floor finishing completely so as to expose the original surface to receive the treatment including carting away debris etc. complete. |
| 45 | Providing and applying first single coat of approved primer and three coats of fire retarding paint of an approved make as per manufacturers specifications to any surfaces, at all height and locations as directed including scaffolding, scraping, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. |
| 46 | Providing and applying first coat of approved Waterproof primer, and two coats of waterproof acrylic based textured exterior paint of an approved make and colour as per manufacturers specifications to textured sand faced or other surfaces, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. |
| 47 | 18 mm thk. Lakha Red Granite tiles/slab |
| 48 | Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottomand top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk.(Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt.0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc.complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) Please Enable Macros to View BoQ information |
