|
| 1 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 2 | Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% OPC cement and 3.5% Emulsion (SS-2) in uniform single layer on sub base/subgrade and compacting with the road roller to achieve the desire density. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 3 | Providing and applying tack coat with Bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface.(All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 4 | Providing and laying dense graded bituminous macadam grading-1 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 5 | Providing and laying bituminous concrete grading-2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 6 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (TRAFFIC SIGNS - Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 7 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 8 | Centre/Edge Lines :- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (All complete as per E/I) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 9 | Supply and Fixing of moulded shank cats eyes moulded shank raised pavement marker made of polycarbonate moulded body and reflected panels with micro parismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD 4280 type H and complaying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-97 DO III DT 11-06-1997. The height width and length shall not exceed 20 mm 150 mm & with minimum reflective area of 13 sqcm. and the each side, slope to the base shall be 35 degree. Fixing will be without nails but using twin polymer shanks using bitumen adhesive on bitumen road as per manufacturs recommnendation including site clearance etc and complete as per direction by rengineer in charge. Rates are included all tax & GST. (Sollar Studs or yellow cats eyes to way AND Red & white two way cats eyes) (All complete as per E/I) For edge line @9 mtr c/c Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 10 | Speed Table (2x1.75+1.75) size 7 m Carriageway Including all T&P, Labour, Material, Royalty Tax but excluding GST Please Enable Macros to View BoQ information |
