|
| 1 | Item No. 1:-Dismantling dead pipeline of H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface,etc. complete. |
| 2 | Item No.2 :Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete |
| 3 | Item No 3 :-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete |
| 4 | Item No. 4:- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation andexcluding backfilling, etc. complete |
| 5 | Item No.5:- Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means |
| 6 | Item No 6:- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151/ 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete..HDPE 110mm PE-100, 16kg/Sqcm |
| 7 | Item No. 7 :- Lowering, Laying and Jointing H.D.P.E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II .HDPE 110mm PE-100, 16kg/Sqcm |
| 8 | Providing HDPE specials for fittings and installation 2% of providing and supplying rate |
| 9 | Item No.8:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing forspecified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able toprovide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this itemshall also include cost of retesting, if necessary and reinstating to original position |
| 10 | Item No 9:-Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below 100mm.(12.40kg./m) |
| 11 | Providing G.I specials for fittings and installation 2% of providing and supplying rate |
| 12 | Item No. 10:- Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in verticalposition, as directed byEngineer-in-charge. 100mm.(12.40kg./m) |
| 13 | Item No. 11 :- Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shallalso include cost of retesting if necessary and reinstating to original postion. 100mm.(12.40kg./m) |
| 14 | Item No.12:- Providing and supplying in ISI mark rigid PVCO class-500 s/s pipe (push on joints) pressure pipes confirming to IS specifications no 16647- 2017 inclusive cost of EPDM gasket seals on joints including all statutory duties excluding GST levied by Government of India and Government of Maharashtra in all respect including third party inspection charges of agency approved by MJP, transit insurance loading, unloading charges conveyance to the departmental store / site and stacking the samein closed shade duly protected from sunrays etc complete. 110mm OPVC pipe Class - 500 PN - 16kg |
| 15 | 110mm OPVC pipe Class - 500 PN - 12.5 |
| 16 | Providing OPVC specials for fittings and installation 5% of providing and supplying rate |
| 17 | Item No 13:-Lowering, laying and jointing with O.P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).110mm OPVC pipe Class - 500 PN - 16 |
| 18 | 110mm OPVC pipe Class - 500 PN - 12.5 |
| 19 | Item No 14: Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified lengthincluding cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position 110mm OPVC pipe Class - 500 PN - 16 |
| 20 | 110mm OPVC pipe Class - 500 PN - 12.5 |
| 21 | Item No. 15:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 22 | Item No.16:-Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck,transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in allrespect etc.complete. 25mm Air Valve Single Ball PN-1.6 |
| 23 | Item No. 17 :-Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -incharge for following diameters of pipe lines (type design attached.) 25mm Air Valve Single Ball PN-1.6 upto 150mm |
| 24 | Item No. 18:- Providing and fixing board displaying information, suchas'Nameofwork, Tendercost, Name of Contractor, Work completion and liability periodetc', having rectangular shape of 1.20mx0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chroma testoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc.with approved colours hade paint complete,on M.S.angle of size 35x35x3mm frame with properly cross braced M.S.angles of size 35mmx35mmx3mm duly painted including Two M.S.angle iron posts of size 65mmx65mmx6mm, 3.65m long painted with aternate black and white bands of 25cm width includingall fixtures etc.and fixing the boards in1:4:8 concrete block of size 60cmx60cmx75cm including, excavation, refilling,transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 25 | Item No.19:- Providing, erecting and giving test of submersible pump setconforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump Section & Code No. Sr. No Unit Supply Rate Rs Erection Rate Rs Total Description Amt Rs. should have suitable discharge out let as per manufacturer's design. Antithrust stream linednon return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erectionclamp 10 mm thick shall be provided with each pump. 22.5 HP submerssible Pump |
| 26 | Item No.20:-3 core PVC insulated, PVC sheathed copper conductor flat submersible cable. Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. 3 core 16 sq mm |
| 27 | Item no.21:- Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90bags/cum) M-150 Please Enable Macros to View BoQ information |
