|
| 1 | Laying and Jointing PVC Pipe. Heading Item No. 1 -Providing and fixing information board of size 1.50x1.20 m prepated on 16.BW G.M.S sheet 25x25x3 mm . Angle iron frame including painting lettering as directed including providing and fixing 50x50x5mm Angle iron post including conveying and fixing in C.C. 1:4:8 block etc. complete. |
| 2 | Item No.2 -Labour charges for removing, disassembling, assembling and re-erection of pumps --- etc. complete. |
| 3 | Item No. 3 - Supplying, erecting, testing and commissioning of automatic control panel for three phase , 415 V, A.C. supply, submersible/centrifugal pump set upto 7.5HP consisting of D.O.L. starter having relay range 9-14 A, S.P.P., combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc. 12-4-17 6673 |
| 4 | Item No. 4 - Providing, erecting and giving test ofsubmersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph,50 Hz A.C. Supply, with cable guard, thrustcarbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10mm thick shall be provided with each pump. Submersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) mpeller)up to 8 stages of category A & B Rate anyalysis) HP-30 ( Head- 127.00m, Discharge-40 Cum/hour) |
| 5 | Item no. 5 :- Providing double flange sluice valveconfirmingfor IS-14846 includingworngear arrangements as per testpressure, stainless steel spindle, caps, including inspection charges, transportation upto departmentalstore, unloading, stacking excluding GST levied byGOI &GOM in all respect etc. complete. (1)200 mm. Dia.- Sluice Valve |
| 6 | 2)100 mm. dia.NVR valve.-PN-1.6 |
| 7 | 3)80 mm. dia.NVR valve.-PN-1.6 |
| 8 | Item No.6 - Providing, fabricating, erecting, M.S.Flanges sleep on type (all tables) of required size and thickness with both side machined. PW 10-1 P.No.18 |
| 9 | Item No.7 -- Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main.--(Pressure gauge-100 mm.dia.) PM-11-3 |
| 10 | Item No. 8- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3 core 35 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL CB-LT/CU |
| 11 | Item No. 9- Supplying, erecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm PVC sheathedsubmersible type copper cable suitably clamped at fixed intervalswith column pipe assembly complete. 12-4-8 P.No 175 141+5% |
| 12 | Item No.10 - Providing and supplying ISI markC.I. S&Spipes(pushon jointspressurepipesof C.I of following classand diameters confirming totheI.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality)excluding GST leviedbyGoI andGoM inall respect, Thirdparty inspectionchargesof TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading fromrailway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directedbyEngineer–in-charge(IS1536/2001forpipesandIS158/1969andIS12820/1989 or latest edition / revisionwith amendments for RubberGaskets. (Suitablefor Tyto MJP DSR 2023-2024 , P.No.63 , Item No.I(I):C.I./D.I.PIPES |
| 13 | 150 mm dia |
| 14 | Item No.11 - Providing, erecting and giving test of centrifugal Monoblockpump set conforming to IS 9079operating at 2900 RPM with CI impeller, priming funnel, cock,suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. HP 3.00 HP |
| 15 | Item No. 12 -Submersible monoblock Pump set (with Bronze / Stainless steel(CF8M) Impeller)Horizontal /Verticalup to 3 stagesCW-PLB/GP. HP 5.00 HP |
| 16 | Items No .13:- Excavation for foundation / pipe trenches inearth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) RS .165 |
| 17 | Items No .14:-Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(Bd-A-3/259) RS.211 |
| 18 | Items No .15:--Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Rs.629 |
| 19 | Items No .16:-Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc.complete. Rs92 |
| 20 | Items No .17:-Providing and supplying in standard mark rigid unplasticised PVC s suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, includingtransportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays andrains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to bejointed with cement solvent). 75 mm dia RS 163 PNo.74 |
| 21 | Items No .18:-Valve chamber with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers) Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast S.F.R.C. frame and cover, etc. complete as directed by Engineer-in-charge. As above of 60 x 45 cm internal size and depth upto 0.9M with S.F.R.C. frame and cover.RS.9955 3- P.No284 |
| 22 | Items No .19:-Supply, install andcommission Electro magnetic Flow Meter (EMF) As Per ISO4064, for Raw/Pure water with accuracy +/ 0.5% of measured value & protection as per given specifications for size 100mm 1000mm including sensor,transmittersurgearrestor,cable GI duct if suitable size for 25 mtrs built inGSM/GPRS (with Simcardanditscharges,validfor 36months) including the pipe 36months) including the pipe cutting, levelingand installation of flowmeter in the pipelines with necessary tool tackles, cranes including 36 months arantee etc complete,asmay be requiredat site&basedontechnical specifications |
| 23 | Items No .20:- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. SECTION-I(IX)PIPES (123) 90mm |
| 24 | Items No .21:-Lowering,LayingandJointingH.D.P.E./ M.D.P.E. pipes inproper position including all specials by compression fitting/electrofusionand butt fusion jointing procedureasper relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusionweldingmachinewithhydraulic jack, top loadingclampetc. andall labours as directedbyengineer inchargeasperIS-7634Part II Fora 90mm dia HDPE Pipe |
| 25 | 150 mm dia CI Pipe 106 |
| 26 | 200 mm dia CI Pipe 137 |
| 27 | 90mm diaPVC Pipe Please Enable Macros to View BoQ information |
