|
| 1 | Item No.1 :Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete |
| 2 | Item No 2 :-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 3 | Item No. 3:- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation andexcluding backfilling, etc. complete |
| 4 | Item No.4:- Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. |
| 5 | Item No 5:- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151/ 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.140mm PE-100 6kg HDPE Pipe |
| 6 | Item No 6:-Lowering, Laying and Jointing H.D.P.E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code 140mm PE-100 6kg HDPE Pipe |
| 7 | Item No 7: Providing HDPE specials Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect,complete as per IS-9523.For all types of specials, bends tees etc. 2% of Pipe Providing rate |
| 8 | Item No. 8:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 9 | Item No.9:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length.140mm HDPE Pipe PE-100 6kg |
| 10 | Item No. 10:-Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality offollowing diameters including railway freight,inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in allrespect etc. complete. 25mm Air Valve Single Ball PN-1 |
| 11 | Item No. 11:-Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70Mlong over branch flange of air valve tee, providing PCC block of M-150 concrete, 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -incharge for following diameters of pipe lines (type design attached.) |
| 12 | Item No. 12:- Providing and fixing board displaying information, suchas'Nameofwork, Tendercost, Name of Contractor, Work completion and liability periodetc', having rectangular shape of 1.20mx0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chroma testoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc.with approved colours hade paint complete,on M.S.angle of size 35x35x3mm frame with properly cross braced M.S.angles of size 35mmx35mmx3mm duly painted including Two M.S.angle iron posts of size 65mmx65mmx6mm, 3.65m long painted with aternate black and white bands of 25cm width includingall fixtures etc.and fixing the boards in1:4:8 concrete block of size 60cmx60cmx75cm including, excavation, refilling,transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge Please Enable Macros to View BoQ information |
