|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Repairs to floor tile, wall tile for OTM and Md Accn at zone A and zone B New Mil Stn Kapurthala under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge |
| 3 | M&L for glazed ceramic coloured tiles in vertical surface 450 x300 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed in cenment mortar (1:4) complete all as specified and directed by Engr-in-Charge |
| 4 | M&L for vitrified ceramic tiles 8-9 mm thick (square/ rectangular), light shade, polished, area of each tile exceeding 0.42sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge |
| 5 | M&L for vitrified ceramic coloured tiles 8-9 mm thick light shade (square/rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge |
| 6 | Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 7 | M&L for PCC (1:5:10) type E2 using 40mm graded aggregate as in sub base complete all as specified and directed by Engineer-in-charge. |
| 8 | M&L for PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40 mm thick as for receiving top finishing layer of ceramic tiles finished even and smooth etc complete all as specified and directed. |
| 9 | M&L for non skid ceramic tiles light shade tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.06sqm not exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed by Eng in Charge |
| 10 | M&L for granite 16-18 mm thick (of any type) work (table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking platforms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed by Eng-In-Charge. |
| 11 | M&L for machine cut kota stone slab flooring for cooking platform and flooring 20-25 mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in cement mortar 1:6 incl making hole for gas pipe complete all as specified and directed by Engr-in-Charge |
| 12 | M&L for machine cut kota stone as in risers, steps, skirting, dado, 20-25 thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in cement mortar 1:6 incl making hole for gas pipe complete all as specified and directed by Engr-in-Charge |
| 13 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 14 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified. |
| 15 | M&L for 15mm thick rendering on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished fair and smooth complete all as specified and as directed.Note: water proofing compound shall be measured seprately. |
| 16 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 17 | Supply only integral water proofing compound. |
| 18 | M&L for rendering 5mm thick in cement mortar (1:3) on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 19 | M&L for preparation of plastered and unplastered surfaces and applying two coats of OBD on undecorated or newley plastered surfaces of ceiling complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for preparation of plastered and unplastered surfaces of wall and applying two coats of oil bound distemper over 3mm wall care putty complete all as spedifed and directed by Engr-in-Charge. Note- OBD to be done by Roller. |
| 21 | M&L for preparation of plastered and unplastered surfaces of wall and applying two coats of exterior emulsion/ weather proof paint complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 23 | M&L for machine cut kota stone as in patches n.exc 03 sqm slab flooring for landing and flooring 20-22 mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for machine cut kota stone as in patches n.exc 03 sqm as in risers, steps, skirting, dado, 20-22mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge |
| 25 | M&L for renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specifed and directed by Eng-In-Charge |
| 26 | M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by Engr-in-charge. |
| 27 | M&L for points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-in-charge. |
| 28 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling andplugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by Engr-in-Charge Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
