|
| 1 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.3 sqm.) including all cost of labour T&P etc, complete. |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3. m height including stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Cum.) (Data for 2.83 cum.) including all cost of labour T&P etc, complete. |
| 3 | Earth work in all kind of soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge (per 100 Cum.) |
| 4 | Fly ash Brick massonary work in C.M. (1:6) in Super structure using fly ash Brick having crushing strength not less than 125Kg./Cm2 including splays cutting circular,moulding watering curing for finished work including cost, conveyances, taxes, royality of all materials and labour with T&P required for the work as per the direction of the Engineer-in-charge. |
| 5 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 6 | Supplying, fitting & fixing of Kadpa Stone on 20mm thick cement mortar (1:4) (1. cement : 4 Course sand) of approved quality including cost of conveyance, taxes, cost of all labour T&P etc, complete. in all respect as per direction of Engineer-in-charge. |
| 7 | Supplying, fitting & fixing of MS grill made out of MS flat, angle etc including cost of conveyance, taxes, cost of all labour T&P etc, complete. in all respect as per direction of Engineer-in-charge. |
| 8 | Supplying, fitting and fixing of Chequered tile flooring on 20mm thick bed in C.M (1:4) and filling the joint with white cement incluidng cost of all materials and labour etc, complete. |
| 9 | Repair and refixing of Ms door shutter after necessary repair including cost of conveyance, taxes, cost of all labour T&P etc, complete. in all respect as per direction of Engineer-in-charge. |
| 10 | Providing & laying Granular Sub Base with Close Graded Grading-III materials as per table 400-1,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with VRR to achive desired density as per Clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). |
| 11 | Providing and laying of 80mm thick factory made cement concrete interlocking paver block of M35 grade of approved make design colour and size made by Block making machine with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete including cost, conveyance, royality, taxes of all materials, labour, T&P etc. complete as per direction of EIC.confirming to IRC-SP 63:2018 |
| 12 | Cement concrete (1:2:4) using 12mm to 20mm size hard crusher broken granite stone chips of approved quality and from approved quarry including lowering, laying, compacting concrete with watering, curing including cost, conveyances, royalties & taxes of all materials with cost of all labour, T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 13 | Scrapping, cleaning and providing two coats of weather coat Providing and painting one coat of primer and two coat of enamel paint with a coat of exterior primer over exterior surface including cost of all materials, labours and T&P etc complete. |
| 14 | Providing two coats of Synthetic Enamel paint with a coat of Red Oxide primer over wood or iron works including cost of all materials, labours and T&P etc complete. |
| 15 | Scrapping, cleaning and providing two coats of plastic emulsion Providing and painting one coat of primer and two coat of enamel paint with a coat of interior primer over interior surface including cost of all materials, labours and T&P etc complete. |
| 16 | Disposal of surplush debris away from worksite by mechanical measn including loading & unloading with cost of all labours and T&P etc complete. |
| 17 | Playing Equipments: Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Wheel Chair MGR. |
| 18 | Providing and painting one coat of primer and two coat of enamel paint of Monkey Bar |
| 19 | Providing and painting one coat of primer and two coat of enamel paint of Wheel Chair Swing |
| 20 | Providing and painting one coat of primer and two coat of enamel paint of Two-Seater Swing |
| 21 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Bucket Swing |
| 22 | Providing and painting one coat of primer and two coat of enamel paint of Single-Seater Spring Rider |
| 23 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Musical Drums with replacement of 02 nos. of musical drum cover (10\\") with rod |
| 24 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Musical Poles with replacement of 02 nos. of musical drum cover (14\\") with rod |
| 25 | Providing and painting one coat of primer and two coat of enamel paint of Sand Play Table |
| 26 | Providing and painting one coat of primer and two coat of enamel paint of Two-Seater Spring See-Saw |
| 27 | Providing and painting one coat of primer and two coat of enamel paint of Musical Panel |
| 28 | Providing and painting one coat of primer and two coat of enamel paint of Multi Swing |
| 29 | Providing and painting one coat of primer and two coat of enamel paint of Fun Station |
| 30 | Providing and painting one coat of primer and two coat of enamel paint of Double See-Saw |
| 31 | Providing and painting one coat of primer and two coat of enamel paint of Multi Seater Merry-Go-Round |
| 32 | Providing and painting one coat of primer and two coat of enamel paint of Ball Pool |
| 33 | Providing and painting one coat of primer and two coat of enamel paint of Three-Seater Merry-Go-Round |
| 34 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Welding Work of Shoulder Builder |
| 35 | Providing and painting one coat of primer and two coat of enamel paint of Plain Slide |
| 36 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Hanging Bridge |
| 37 | Providing and painting one coat of primer and two coat of enamel paint of Hanging Dustbin |
| 38 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Arch Swing with replacement of 02 nos. of swing chain with belt. |
| 39 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Deluxe Sea Saw with replacement of 01 no. of complete balancing bar set. |
| 40 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Deluxe Sea Saw with replacement of 02 nos. of seat. |
| 41 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Air Walker with replacement of 02 nos. of complete leg set. |
| 42 | Providing and painting one coat of primer and two coat of enamel paint of Push Up Bar including cost of allmaterials, labours and T&P etc complete. |
| 43 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Chest Press with replacement of 01 no. of 10\\"-6\\" shaft bearing, 20 nos. of 6004-bearing with bearing cap. |
| 44 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Air Skier with replacement of 01 no. of complete leg set. |
| 45 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Roto Wave Slide with replacement of 01 no. of Roto Slide chute. |
| 46 | Repairing, Providing and painting one coat of primer and two coat of enamel paint & Maintenance of Roto Fun Station with replacement of 01 no. of Roto Slide chute with Ladder. |
| 47 | HORTICULTURE WORKS:-Fine dressing and turfing with initial lead of 50m and 1.5m initial lift as per direction of Engineer-in-charge |
| 48 | Puddle filling of good clay including initial load 50m and 1.5m initial lift. s per direction of Engineer-in-charge |
| 49 | EI WORKS: Supply & fixing of 40Watt decorative post top fitting. including cost of allmaterials, labours and T&P etc complete. |
| 50 | Supply and laying of 2x6mm2 Al.Ar. U.G cable. Incluuding cost of excavation and backfilling. including cost of allmaterials, labours and T&P etc complete. |
| 51 | Supply and laying of 3.5x25mm2 Al.Ar. U.G cable. excavation and backfilling. including cost of allmaterials, labours and T&P etc complete. |
| 52 | Supply and Laying of 40mm HDPE pipe for laying of Cable. excavation and backfilling. including cost of allmaterials, labours and T&P etc complete. |
| 53 | Cable trenching in all type of soil excepting rocky soil including excavation of earth, brick laying and filling of sand and loose earth to the original ground level with surface dressing after laying 1no 1.1 KVPVC insulated PVC sheathed armoured cable removal of surplus earth to a lead up to 5km. |
| 54 | Supply & fixing of SP MCB. Including all material required for fixing and placing including cost of allmaterials, labours and T&P etc complete. |
| 55 | Providing and laying C.C (M-30) using 20mm size down graded crusher broken hard granite chips including the cost of centring and shuttering with cost of all labour, materials.T & P and taxes, royality etc complete in all respect as per the direction of Engineer-in-charge. |
| 56 | Supply and fixing and commisioning of 150W Flood light . With approved make including cost of allmaterials, labours and T&P etc complete. |
| 57 | S/F of Outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions. |
| 58 | Supply and fixing of Standard earthing including cost of allmaterials, labours and T&P etc complete. |
| 59 | Supply and fixing of 10W Bulkhead Fitting. including cost of allmaterials, labours and T&P etc complete. |
| 60 | PH Works: Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast) Ground Floor 25mm UPVC ASTM Pipe |
| 61 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in chargeG. Floor |
| 62 | 1st Floor |
| 63 | 2nd Floor |
| 64 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. 15mm dia long body Bib Cock cock (Jaquar)-CON-CHR-107KN |
| 65 | 20mm dia CP concealed stop cock(Jaquar)CON-CHR-087KN including cost of allmaterials, labours and T&P etc complete. |
| 66 | 15mm dia CP angle stop cock (FLR-ACR-5053N) including cost of allmaterials, labours and T&P etc complete. |
| 67 | 15mm dia CP Pillar cock (Jaquar)CON-CHR-021KN including cost of allmaterials, labours and T&P etc complete. |
| 68 | 25mm dia brass or gun metal full way valve(shakti make) including cost of allmaterials, labours and T&P etc complete. |
| 69 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in chargeHalf pedestal Basin(Hindware)No.91049+91115 |
| 70 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge1.50 three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm. DOL Control panel Please Enable Macros to View BoQ information |
