|
| 1 | Demolition of cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level) and removing rubbish to outside MD land complete all as specified and directed. |
| 2 | M&L for hard core of broken stone or boulders, gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 3 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including necessary formwork complete all as specified and directed. |
| 4 | M & L for 100mm thick PCC 1:4:8, type D2, (using 40mm graded stone aggregate) as in sub- base floor finished the surface fair and rough to receive subsequent layer with and including necessary formwork complete all as specified and as directed. |
| 5 | M&L for sand filling under floors or in foundations including watering and consolidation for cushioning complete all as specified and as directed. |
| 6 | M & L Machine pressed precast concrete interlocking paver block any shape prepared with grey cement and pigment of size confirming to IS 15658-2006 of 60 mm thick M-35 Grade laid over sand cushioning layer complete all specified and directed. (Note: Sand cushioning shall be measured and paid in relevant item.) |
| 7 | M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cmX30cmX15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern over a coat of primer as directed by Engr-in-Charge |
| 8 | M&L chequered designed cement concrete tiles of size 300mm x 300 mm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. |
| 9 | Dismantling Structural steel work including doors, gates, grills but excluding framed truss etc |
| 10 | M&L for Rolled sections as in Stairs (framed) including stringers, treades, landing,balusters, hand rails etc. in cluding cleats, brackets, etc confirming to Fe410-W Gde- E- 250)quality-A complete all as speicfied and directed. |
| 11 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 12 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 13 | M&L for drilling holes ,dia and depth of hole shall exc. 25mm but n.exc. 40 mm tappered (with standard or gas thread) complete all as specified and directed. |
| 14 | M&L for drilling holes ,dia of hole shall exc. 25mm but n.exc. 40 mm and depth of hole shall exc. 12 mm but n.exc. 25mm tappered (with standard or gas thread) complete all as specified and directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 16 | M & L for 25 mm thick Plain Cement Concrete , 1:2:4 type B-1 (using 20 mm graded aggregate) as in sub base of floor finished even and amooth without extra cement complete all as specified and directed. |
| 17 | M&L 18 to 20 mm thick Granite stone slabs (Black/Ruby Red) work (table rubbed and polished) as in cooking platforms/ floors bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 18 | M&L 18 to 20 mm thick granite stone slabs (colour/ shade, design / pattern as approved by GE) tiles machine cut in skirting/dado/cladding jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including screed bed 10 mm thick in cement mortar 1:3, complete all as specified and as directed. |
| 19 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed |
| 20 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge. complete all as specified and directed. . |
| 21 | M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 22 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and as directed. |
| 23 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 24 | Supply only liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 25 | M & L for plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed. |
| 26 | M & L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement mortar 1:6 complete all as specified and directed. |
| 27 | M & L for walling of random rubble, Except stone uncoursed well bonded, bedded and solidly hearted, built in Cement mortar 1:6 complete all as specified and directed.(Note: Stone retrived from dismantling stone / bouldar masonary catered here-in-before shall be re-used.) |
| 28 | M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed. |
| 29 | M& L for boulder pitching, laid dry, hand packed tightly and pitching is grouted with cement and sand mortar 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
