|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Excavatioon in earth work and disposal of all excavated earth up to a lead disposed earth to be levelled and neatly dressed as per direction of Engineer-in-charge. |
| 3 | Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with 15 % plum and curing complete excluding 150mm to 300 mm as per HPPWD specifications. |
| 4 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to givea fair finish including centring,shutering,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceding 4 meters and removal of the same for insitu-reinforced concrete and plain concrete work in:- |
| 5 | Vertical surface such as walls(any thickness)partation and the like including attached pillasters |
| 6 | Providing wood work in frame of doors windows and clerestory windows and otherframe work wrough framed and fixed in position(2nd class deodar. Wood). |
| 7 | Providing fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws40mm thick 2nd class deodar wood.including entire carriage of material upto all leads |
| 8 | 20mm cement plaster in single coat on rough side of brick masonary for interior plaster uptoloor two level including arrises,internal rounded angles,chamfers and/or rounded anglesnot exceeding 80mm in girth and finished even and smooth with cement mortar 1:6(1cement:6 sand)including entire carriage of material upto all leads and lifts. |
| 9 | 6mm thick cement plaster in ceiling in cement mortar 1:3(1cement:3sand) including entirecarriage of material upto all leads and lifts. |
| 10 | Cement concrete flooring 1:2:4(1cement:2sand :4graded stone aggregate nominal size) laid in one layer finished with floating coat of neat cement 40mm thick.including entire carriage of material upto all leads and lifts. |
| 11 | Applying priming coat over new wood and wood based surfaces after and includingpreparing the surface by throughly cleaning oil,grease,dirt and other foreign matterwith ready mixed paint brushing wood primer pink.including entire carriage of material upto all leads and lifts. |
| 12 | Painting two coat excluding priming coat on new wood and wood surfaces with enamelaint to give an even shade including cleaning the surface of dirt,dust and other foreign matter sand papering & stoping.including entire carriage of material upto all leads & lifts |
| 13 | White washing with lime on decorated wall surfaces(three coats) to give an even shadeincluding throughly brooming the surface to remove all dirt dust mortar drops and loose scale of lime wash and other foreign matter.including entire carriage ofmaterial upto all leads and lifts. |
| 14 | Providing 40x3mm flat iron hold fast 40cms long including fixing to frame with 10mmdiameter bolts nuts and wooden plugs and embedding in cement concrete block30x10x15cms 1:3:6 (1cement:3sandf:6graded stone aggregate 20mm nominal size) including entire carriage of material upto all leads and lifts. |
| 15 | Providing fixing Aluminium.tower bolts barrel type anodized transparent or dyed to required shade and colour with screws etc. complete.250x10mm |
| 16 | Providing fixing aluminium handle anodized transparent or dyed to req. shade and colour with screws etc. complete. 125mm |
| 17 | Providing fixing sliding door bolts anodized transparent or dyed to required shade andcolour with screws etc. complete. 250x16mm.based surfaces after and including preparing the surface by throughly cleaning oil,grease,dirt and other foreign matter with ready mixed paint brushing wood primer pink.including entire carriage of material upto all leads and lifts. |
| 18 | Providing and placing in horizental layers filtering media duly graded,screened,washed and cleaned asspecified by the Engineer - in - Charge :- |
| 19 | Top Layer:- Fine sand (Eff : size 0.20mm to 0.40 and Uniformity - co-efficient 2.00 to 3.00) |
| 20 | Second layer :- Coarse sand 3mm - 6mm. |
| 21 | Third Layer Bajri :- 6mm - 20mm. |
| 22 | Fourth Layer Bajri 20mm - 25mm, |
| 23 | Bottom Layer :- Broken stone 50mm - 75mm |
| 24 | Removal of filter media duly graded screened, washed and cleaned as specified by the Engineer-in-charge. |
| 25 | Top layer :-Fine sand (Eff. size 0.20mm to 0.40mm adn uniformity-co-efficient 2.00 to 3.00) to bottom |
| 26 | layer. cum |
| 27 | Placing and washing of old filter media after taking |
| 28 | 80% serviceable specified by Engineer in Charge |
| 29 | Demolition above ground level upto 1.50 metres depth and disposal of unserviceable materials within 20 metres lead. Un-reinforced cement concrete upto 15 cm. thickness. |
| 30 | Providing and laying cement concrete work 1:2:4 (1:cement:2 sand:4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work in and reinforcement for reinforced concrete work in :-foundation and plinth including entire carriage of marterial upto all leads and lifts |
| 31 | in wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string fromourses, etc. top of foundation level upto floor two level. |
| 32 | Providing mild steel / tor steel reinforcement for RCC work including bending binding and placing |
| 33 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring,shutering,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceding 4 meters and removal of the same forinsitu-reinforced concrete and plain concrete work in:- |
| 34 | Vertical surface such as walls(any thickness)partation and the like including attached pillasters Please Enable Macros to View BoQ information |
