|
| 1 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil. |
| 3 | M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete. |
| 4 | M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately. |
| 5 | Supply only Integral water proofing compound (WPC) |
| 6 | M&L for Precast cement concrete block masonry 1:3:6 type C1 with solid block exc 10cmin width and setting in cement morter 1:6 complete all as specified and ditected by Engr-in-Charge. |
| 7 | M&L for Pre-cast cement concrete solid block masonry in PCC 1:3:6 type C-1 in wall 10 cm thick and setting in CM 1:4 complete all as specified and directed. |
| 8 | M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge.. |
| 9 | M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 10 | M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement. |
| 11 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge. |
| 12 | M & L for Glazed ceramic coloured tiles of size 300 mm X 200 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 13 | M & L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. |
| 14 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge. |
| 15 | M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 16 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 17 | Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge. |
| 18 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. |
| 19 | M&L for 50 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.. |
| 20 | M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in Beams , cantilevers, bressummers, lintels etc complete all as specified and directed |
| 21 | M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in chajjas complete all as specified and directed |
| 22 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 23 | M & L for mild steel TMT bars 6 to 8 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 24 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 25 | S & F II class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints. complete all as specified and directed by Engr In Charge. |
| 26 | S & F II class hard wood Plain, framed, pannelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc complete as specified. |
| 27 | S&F butt hinges, medium weight, cold rolled mild steel, size 100mm. |
| 28 | S&F MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, 250mm length.complete all as specified and directed by Engr In Charge. |
| 29 | S&F 150mm barrel tower bolts, stove enamelled black, with bright bolt.complete all as specified and directed by Engr In Charge. |
| 30 | S&F MS pressed handles, oval type, stove enamelled black size of 125mm. |
| 31 | S&F Pre-painting galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 32 | Material & labour for two coats of synthetic enamelled paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge. |
| 33 | Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge. |
| 34 | S & F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated)conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified. |
| 35 | S & F bands, straps, supports or stays for rain water, ventilating pipes, including bolts if required as in wind tie using MS flat iron (40x6)mm and similar work confirming to Fe 290 (Gde-E-165) complete all as specified. |
| 36 | S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 37 | S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 38 | S & F for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 39 | S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed. |
| 40 | S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC all as specified and directed. |
| 41 | S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge. |
| 42 | S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge. |
| 43 | Supply & fixing 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge.. |
| 44 | S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) |
| 45 | S&F PVC connections 15mm size with PTMT nuts of length 600mm |
| 46 | S&F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).. |
| 47 | M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed. |
| 48 | S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors |
| 49 | S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors |
| 50 | S & F 75 mm dia bore PVC (SWR) bends any radius |
| 51 | S & F 110 mm dia bore PVC (SWR) bends any radius |
| 52 | S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal |
| 53 | S & F PVC (SWR) 75 mm bore vent cowl. |
| 54 | S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall. |
| 55 | S & F of 20 mm dia Aluminium anodised tubular towel rail including one pair of fixing brackets complete all as specified and directed. |
| 56 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 57 | M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the side of pipe 100 mm bore, after they are laid and tested complete. |
| 58 | Supply, laying, jointing and testing for 100 mm bore class ‘A’ salt glazed stone ware drain pipe (ISI Marked) of approved make laid in trenches jointed in CM 1:1 all as specified. |
| 59 | M&L for pre-cast type B-1 (1:2:4) 20mm graded stone aggregate ) as in cover slabs for man-holes etc set in cm (1:6) complete all as specified and directed. |
| 60 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 61 | S&F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm complete all as specified and directed by Engr-in-Charge |
| 62 | M & L Point wiring concealed complete with 1.5 sqmm single core PVC insulated with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi standed copper conductor drawn through and including non metallic rigid PVC conduit ISI mark with all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, upto modolur box for housing the switches, socket outlets, fan regulators etc for one light point / E/fan / Bell point controlled by one switch, all as specified and as directed. |
| 63 | All as per Srl item No 1 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 64 | All as per Srl item No 1 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5sqmm including provision of 2.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge. |
| 65 | Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete. |
| 66 | Supply and fix Modular switch Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed. |
| 67 | Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed. |
| 68 | Supply and fix Modular switch Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed. |
| 69 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. |
| 70 | Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings. Make : Anchor/leader/havells |
| 71 | Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 3 module ISI marked complete all as specified and as directed. |
| 72 | Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 6 module ISI marked complete all as specified and as directed. |
| 73 | Supply and fix MODULAR METAL FLUSH BOX Metal flush box 3 module ISI marked complete all as specified and as directed. |
| 74 | Supply and fix MODULAR METAL FLUSH BOX Metal flush box 6 module ISI marked complete all as specified and as directed. |
| 75 | Supply and fix in replacement LED Batten 20W , 4 ft (Approx) length ultra slim square profile with extruded polycabonate, enviromenental friendly, energy efficient , connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed. Make- Havells / Philips / Crompton |
| 76 | Supply and fixing in replacment surface & wall mounted LED 5W tube light fitting batten mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed by Engg-in-Charge. Make: Crompton Cat No.LDLL05-WW (Warm White) or equivalent |
| 77 | Supply & Fixing LED light fitting 1 x 9 W/1 x 10 W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make havells/Bajaj |
| 78 | Supply and fixing LED lamp 9W energy saving upto 80%, BEE rated with all accessories all as specified and directed by Engg-in-Charge. Make:Cromptom part No-LED 9DFCDL-PRO-BO/ LED 9W-B22/E27-CDL/WW or equivalent in Philips/wipro/Havells |
| 79 | Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 08 way 240 volt complete all as specified and directed by Engineer-in-Charge |
| 80 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 6 to 32 Amp |
| 81 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (ii) SPN 40 to 63 AMP |
| 82 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 16 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two twin core cable flat or circular |
| 83 | S&F in replacement exhaust fan, Steel body AC Single Phase, 230V of size 300 mm sweep, with blade and frame and louvres. complete all as per specified and directed by Engineer-in-Charge. |
| 84 | Supply,fixing, Testing water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including provn of grouting bolts in walls including piller cock , pvc connection ect and making good disturbed surfaces. Make : CG/Racold/Havells/Bajaj/indo and all as specified and directed by Engineer-in-charge . |
| 85 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions. |
| 86 | Excavation in tranches in soft loose soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in tranches and getting out including levelling of bottom surface and trimming of sides after removal of existing pipe of any type and off sizes incl fittings complete all as specified and directed. Note:- Rate for Removal of existing pipe of any type and off sizes incl fittings shall be included in the above items. |
| 87 | Returning filling in including spearding, levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soft/hard soil in trenches after the pipes have been laid and tested competed all as specified and directed. |
| 88 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge |
| 89 | Supply, Laying and testing in replacement old UNSV pipe of any type with new 3 layer PP-R polypropylene random copolymer concealed pipes 25mm outer dia SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R Plain & brass threaded polypropylene random fitting laid in trenches , wall , cellings or in floors etc all as specified and directed.Note :- Earth wrok (Excavation, Returning filling and Removal ) shall be measured and paid separately. |
| 90 | S&F PUF insulated cylndrical tank of capacity 1000 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hiknged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specification :- (a) Inner tank will be double layered HDPE food grade material. (b) Outer 4mm thick FRP jointless casing of tank. (c) Thickness of PUF insulation shall be 75mm. (d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%. Note:- Any type Tank fittings such as tank connectors inlet and outlet, tank nipples , Float valves of required size, nipple, union, plug, reduction sockets, sockets ,tee, any type elbow etc demeed to be included in above rates. |
| 91 | Supply and fixing lagging to pipes used in water supply for plumbing all round with lagging closed cell elastomeric nitrile rubber insulation with pipe section of density 60+20% Kg/cum suitable for PPR pipe of size 25mm dia complete all as specified and directed. |
| 92 | Material & Labour in replacement of any type and providing aluminium cladding over insulation of PPR pipe of size 25mm dia with aluminium sheet having thickness 0.2mm all as specified and directed |
| 93 | Supply and Fix in replacement unsv Gate valves of any type and providing PP-R Gate Valve (brass insert) as per requirement of the site of size 25mm dia bore (outer dia in mm) complete all as specified and directed. |
| 94 | M & L for Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc.(16 to 40 mm outer dia) Please Enable Macros to View BoQ information |
