|
| 1 | Excavation in trenches in any type of soil not exc 1.5m wide and not exc 1.5m in depth and getting out in any type of soil complete all as specified |
| 2 | Returning filling in soil incl spreading levelling watering and well ramming in layers not exc 25 cm thick in any type of soil complete. |
| 3 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified. |
| 4 | M&L for PCC M-10 (Nominal mix) using 40mm graded aggregate as in foundation complete all as specified. |
| 5 | M & L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 6 | TMT bars (Fe 500), 10mm dia and over in reinforcement cut to length,bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wirre (anealed) not less than 0.9mm dia or securing with clips all as specified and directed |
| 7 | All as per Ser Item No 6 here-in-before but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders complete all as specified |
| 8 | Form work to sides of concrete foundations, footings, rafts, plinth etc rough finished flat surfaces complete all as specified |
| 9 | Use and waste of form work to side of pillar, post, column etc of square, rectangular or polygonal section with rough finished surfaces complete all as specified. |
| 10 | Reinforced cement concrete M-25 (Design mix) using 20 mm gradd crushed stone agggregate as in as in foundation beam, plinth beam base for columns etc complete all as specified |
| 11 | Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone agggregate as in as in columns pillars posts etc complete all as specified. |
| 12 | Earth filling under floors, spreading, levelling in layers n.exc 25cm thick each incld watering & well ramming as specified. |
| 13 | Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a line surface complete all as specified |
| 14 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in Sub-base to floor finishes complete all as specified |
| 15 | M&L for 25 mm thick PCC (M-15), using 20 mm graded coarse aggregate as in Sub-base to floor finishes complete all as specified. |
| 16 | M&L for 20 mm thick Kota stone slab flooring, mirror polished laid over 20 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified |
| 17 | M&L for MS work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS-1239 (Part I-1990) complete all as specified |
| 18 | M&L for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S complete all as specified |
| 19 | M&L for MS Screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm but not exc 10 cm and dia of sank 11 to 15 mm complete all as specified |
| 20 | Ditto all as per item ser no 18 here-in-before but exc 22.5 cm & not exc 30 cm long complete all as specified. |
| 21 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified. |
| 22 | Ditto all as per item ser no 20 here-in-before but over 10 cm width or girth complete all as specified. |
| 23 | M&L 2mm thick fiber glass reinforced translucent corrugated sheeting with 2 corrugation side lap fixed with 'L' or 'J' type bolts including necessary bitumen washer complete all as specified |
| 24 | Rendering 15 mm thick on fair face of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified. |
| 25 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified |
| 26 | Preparing newly plastered or concrete surfaces of wall and applying two coats of cement based paint over a coat of white wash complete all as specified. |
| 27 | Matrial & Labour for point wiring using approved colour coding as per IS with using approved coper coding as per IS 1.5 Sqmm multistranded , 1100 volt grade copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point / fan / Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. |
| 29 | Supply and fix in High quality LED smart batten tubelight 20 W, aesthetically designed LED having extruded aluminium housing with microwave motion technology for providing an energy efficient solution and with aluminium housing & integrated electronic driver., internaly pre wired of 1.5 sqmm twin twisted flexible cable of make Havells with cat part no. LUMINESMART10WLED865PCWH or equivalent, including marking of CA No on batten all as specified & directed . |
| 30 | Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 04 way 240 volt complete all as specified and directed by Engineer-in-Charge |
| 31 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 6 A To 32 AMP |
| 32 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (ii) SPN 40 to 63 AMP |
| 33 | S&F Wiring for circuit/submain wiring 2x1.5 sq. mm + 1x 1.5 sq mm earth wire sizes of FR is PVC insulated copper conductor, single core cable in steel Cunduit surface/recessed as required complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 10 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two twin core cable flat or circular |
| 35 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions. Please Enable Macros to View BoQ information |
