|
| 1 | Excavation in post holes each n.exc 0.50 Cum and getting out in soft/loose soil and removing surplus soil to a distance n exc 50 M and making good surface, complete all as specified and directed. |
| 2 | M & L for plain cement concrete 1 : 2 : 4 Type B2 (using 40 mm graded crushed stone aggregsate) as in foundation and mass concrete, complete, all as specified and directed. |
| 3 | Dismantling plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof coverings, complete all as specified and directed. |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 5 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour and strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 6 | S & F 2mm thick UV protected multiwall/solid polycarbonate plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling of existing roof sheets of any pattern, complete all as specified and directed. |
| 7 | Supply and fixing colour coated tile profile roofing sheet made out of factory roll formed pre-painted galvanized steel sheet (PPGI) of approved colour and 0.45 mm total coated thickness (TCT) with minimum 120 GSM zinc coating, conforming to relevant IS specifications, having tile shaped pressed profile with effective cover width about 1000 mm and suitable pitch for proper rain water drainage. The sheet shall be fixed over steel roof framing with self drilling / self tapping screws of approved make with EPDM washers, including side laps and end laps (minimum 150 mm), cutting to required size and shape, drilling holes, ridge alignment, sealing of joints, complete including dismantling of old existing sheets , complete all as specified and directed. |
| 8 | Supply and fixing matching colour coated ridge piece made out of 0.45 mm thick PPGI sheet, including fixing with self tapping screws, EPDM washers, sealing and finishing, complete all as specified and directed. |
| 9 | Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed. |
| 10 | S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410 or Fe 310, complete all as specified and directed. |
| 11 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 12 | Dismantling chain ink fencing any type and any position, complete all as specified and directed. |
| 13 | Fixing only Chainlink including line wires,any mesh,size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed. |
| 14 | Supply Chainlink MS galvanised fencing, any size or type, complete all as specified and directed.Note:- Actual weight of fencing shall be asertained by board of officers to be convened by the Accepting Officer. |
| 15 | S & F Compound girders and stanchions, lattice griders, aerial masts, staging for water tanks & the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc. of Gde Fe 410-W (Gde- E-250) Qty-B, complete all as specified and directed. |
| 16 | M&L for preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 17 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar, complete all as specified and directed. |
| 18 | M&L boulder pitching grouted with cement and sand mortar 1:6, complete all as specified and directed. |
| 19 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4), complete all as specified and directed. |
| 20 | Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 21 | M & L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 22 | M & L preparation of new plastered surface and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer, complete all as specified and directed. |
| 23 | M&L for preparation of old surface ( Plastered or unplastered) of walls and applying two coat of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and directed. |
| 24 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed. |
| 25 | M&L for 16-18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm,150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment, complete all as specified and directed. |
| 26 | M&L for 40mm thick sand stone slabs polished, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match, complete all as specified and directed. |
| 27 | M&L for 20 mm thick granite work over and including 15 mm thick cement mortar (1:4) (table rubbed and polished) in steps,jamps,pillars,window cills,cooking platforms and like in cement mortar (1:4)including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 28 | S&F machine cut cobble stone of approved size, colour and texture made from hard durable stone such as granite/basalt, laid over prepared sub-base including 75–100 mm thick cement mortar bed of mix 1:4 (1 cement : 4 coarse sand) or over 20–25 mm thick sand bedding as specified, including proper alignment, hand packing, ramming, filling joints with dry sand or cement slurry, curing, complete all as specified and directed. |
| 29 | M&L Raking out joints (in old works) /pointing to random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortar or lime mortar, complete all as specified and directed. |
| 30 | M&L to flush pointing to to random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortar (1:4), complete all as specified and directed. |
| 31 | M&L Walling of polygonal rubble, uncoursed well bonded, bedded solidly hearted, built in CM (1:4), complete all as specified and directed. |
| 32 | S & F for PVC SWR conduit pipes 110mm dia in any length with rubber ring joints laid in trenches or in floor or as in weep holes, complete all as specified and directed. |
| 33 | Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia, complete all as specified and directed. |
| 34 | Dismantling floor, hearth or wall tiling including CM bedding (but not backing), skirting, complete all as specified and directed. |
| 35 | M&L Glazed ceramic colour tiles of size of size 0x 250x 7 mm/ 450X350X 7mm thick as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick backing coat in CM 1:3, complete all as specified and directed. |
| 36 | M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm,as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick backing coat in CM 1:3, complete all as specified and directed. |
| 37 | Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 38 | M & L for 40mm thick plain cement concrete 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate ) as in floors etc., complete all as specified and directed . |
| 39 | M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed |
| 40 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured to match the shade of tiles laid over and including 15mm thick screed bed odr bedding layer in cement mortar 1:4 , complete all as specified and directed |
| 41 | M &L for 75mm thick plain cement concrete 1:2:4 Type B2 ( 40 mm graded aggregate ) as on foot path etc. complete all as specified and directed. |
| 42 | M&L for chequered cement concrete tiles glossy finish 30cm X30cmX25mm thick set, joined and pointed in neat cement slurry in floors with grey cement and with grey cement and pigment and including 15mm thick screed bed in cement mortar 1:4 , complete all as specified and directed |
| 43 | M & L PCC 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) as in providing, cement concrete cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, complete all as specified and directed . |
| 44 | S&F powder coated aluminium partition with 5 mm thick plain/pin headed glass in top panel & 12 mm thick both side laminated particle board/5mm thick ACP sheet in bottom panel with Jindal catlogue aluminium section of size 101.6mmx44.45mmx1.27mm and 101.60mmx 44.45mmx1.20mm, including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screw etc including making good to the disturbed portion complete include dismantling, as in floors etc., complete all as specified and directed . |
| 45 | M&L for Softwood 2nd class wrought Trellis work (Jafri) 35mm x 10mm laths (fixed straight or diagonally) in two ways trellis work with 50mm spaces in the clear, including 75mm x 50mm fillet (notched to take ends of laths) all round and fixed complete including dismantling all as specified and directed. |
| 46 | M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 47 | S & F round steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia. |
| 48 | S & F deformed steel bars 6 to 8 mm dia and , cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia., complete all as specified and directed. . |
| 49 | S & F galvanized 2 brand sheet barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails strasing bolts, complete all as specified and directedNote:-: Each of wire to be measured. |
| 50 | Dismantling of old GI barbed wire fencing of any descriptio, complete all as specified and directed.Note:-: Each of wire to be measured. |
| 51 | Supply and fixing precast reinforced cement concrete (RCC) manhole cover with frame of angle 75x75x5mm, of required size (1.20x0.50x0.075 in metres) ,M-20 grade,2 Nos of inbuilt 10mm dia bar handles , approved make, conforming to relevant BIS specifications, of specified load classification, fixed in cement concrete bed of suitable thickness, including centering, shuttering, curing, hoisting, placing in position complete include dismantling , complete all as specified and directed. |
| 52 | Notes :-An amount of Rs 2,34,330 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
