|
| 1 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc. |
| 2 | M&L Rendering 15 mm thick CM (1:4) on concrete/brick surfaces on wall etc and finishing the surface even and smooth without using extra cement complete all as specified and as directed.. |
| 3 | M&L prepation of plastered surface of wall and applying three coat of white wash. |
| 4 | Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc complete. |
| 5 | M & L brick work with fly ash bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:6 complete all as specified and as directed. Note : Old clay brick optained from demolition will not be utilised in work. |
| 6 | M&L for Brick work old size with fly ash bricks, straight or curved on plan to any radius radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 7 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof sheet edges etc complete all as specified and as directed. |
| 8 | M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC shall be measured and paid seprately) |
| 9 | M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian paint Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed. |
| 10 | M&L for plain cement concrete 1:5:10 type D-2 (using 40mm graded bricks bats) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 11 | Supply only integral water proofing compound complete all as specified and as directed. |
| 12 | Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed |
| 13 | M&L for 75mm thick cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and smooth without using extra cement complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer. |
| 14 | Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store. |
| 15 | M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement. |
| 16 | M&L non skid ceramic coloured tiles 300x300 7 to 8 mm thick (square or rectangular) , including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 17 | M&L Vitrified ceramic tiles 600x600, 8 to 9 mm thick, light coloured as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed layer in CM 1:6 complete all as specified and directed. |
| 18 | M&L for double charged vitrified tiles 600x1200 mm, 9 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and as directed. |
| 19 | M&L for colour printed glazed ceramic tiles 300x600, 6-7mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge. |
| 20 | M&L for digital colour printed glazed ceramic tiles 300x600, 6-7mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge. |
| 21 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete all as specified and directed. |
| 22 | M&L 35-40mm thick Rough dressed stone slab flooring, laid dry but jointed & pointed in CM(1:3) complete all as specified and directed. |
| 23 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes with CM (1:6) complete all as specified and as directed. |
| 24 | Mirror Grinding & polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including patch repair of broken kota stone complete all as specified and as directed. Note : Patch repair area of kota stone shall be measured 1.1 time of actual area and paid separately. |
| 25 | Material and Labour for PCC 1:4:8 type D-2 using 40 mm stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 26 | Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid dry or laid dry & pointed complete all as specified and directed. |
| 27 | Dismentling and refixing at same location or other place n exc 50m in required pattern of 60-80 mm thick paver block over and including 50mm thick compacted bed of fine sand finishing and sweeping extra sand complete all as specified and directed. |
| 28 | M&L for vitrified anti skid matt finished heavy duty Paver color tiles 40 cmx40cmx 9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 29 | M&L for ISI Mark coloured chequered cement concrete tiles 30cm x 30cm x 22-25mm thick approved colour, design & pattern as in footpath, parks, lawns, parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern, set, jointed and pointed in grey cement with color pigments slurry in floors over 15mm CM (1:6) thick screed bedding specified and directed by engr-in-charge. |
| 30 | M&L for ISI Mark 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed. |
| 31 | M&L for ISI Mark 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed. |
| 32 | Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC. |
| 33 | Dismantling of PVC water tanks exc 250 & n exc 500 litres complete all as specified and as directed. |
| 34 | Dismantling of PVC water tanks & removing to store exc 500 & n exc 1000 litres complete all as specified and as directed. |
| 35 | S&F rotational moulded,multilayer HDPE water storage tank of 3Layer white color 500 ltrs capacity (Cylindrical vertical with closed top) ISO Approved fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 36 | S&F rotational moulded,multilayer HDPE water storage tank of 3Layer white color 1000 ltrs capacity (Cylindrical vertical with closed top) ISO Approved fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 37 | S&F in repairs Stop Valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and directed. |
| 38 | Taking up or down existing 15mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted. |
| 39 | Taking up or down existing 20mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted. |
| 40 | S&F in jointing and testing 15mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings complete all as pecified and as directed. |
| 41 | S&F in jointing and testing 20mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings complete all as pecified and as directed. |
| 42 | Supplying and laying of 20mm CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 43 | Supplying and laying of 25mm CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed. |
| 45 | S&F one piece (with flushing cistern) vitreous china EWC size 650 x 355 x 745 ' snow white with 'P' or 'S' trap, soft closing seat cover etc complete all as specified and as directed. |
| 46 | S&F in repair white color Vitreous China Ware table top Wash hand basin with single leaver basin mixer fixing on granitre complete all as specified and as directed. |
| 47 | S&F in repairs Vitreous China Urinal, Half stall type, white with pvc connection , waste pipes and all accessorise complete all as specified. |
| 48 | S&F in repairs CP Urinal spreader for fixing with 15 mm dia pipecomplete all as specified and directed. |
| 49 | S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. |
| 50 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 51 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 52 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 53 | S&F bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 54 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and directed. |
| 55 | S&F in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge. |
| 56 | S&F in repair 15 mm bore angle cock long thread fancy type chromium plated cast copper alloy, complete all as specified and directed |
| 57 | S&F in repair 15 mm bore bib taps chromium plated fancy type, cast copper alloy complete all as specified and directed |
| 58 | S&F in repair of CP health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed. |
| 59 | S&F in repair of CP SS jet spray with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed. |
| 60 | S&F for stainless steel kitchen plate rack including fixing arrange ment to walls with rawel plug or wooden plugs complete all as specified and directed. Note : Beaing new provision, Schedule of credit not avalable againt this Item. |
| 61 | S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge |
| 62 | S&F in replacement of SS soap case premium quality, complete all as specified and directed. |
| 63 | Cleaning & removing all scale & dirt, etc. from tanks and from mouths ofcirculating pipes, etc. from 500 litres tank complete all as specified and directed. |
| 64 | Cleaning & removing all scale & dirt, etc. from tanks and from mouths ofcirculating pipes, etc. from 1000 litres tank complete all as specified and directed. |
| 65 | Dismantling of cast iron /PVC/RCC drain pipe up to 100mm dia , jointed in cement mortar complete all as specified and directed. |
| 66 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 67 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 69 | S&F PVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 70 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 71 | S&F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. |
| 72 | S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 73 | S&F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. |
| 74 | S&F PVC (SWR) reducers of size 110 mm x75 mm complete all as specified and directed. |
| 75 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed. |
| 76 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed. |
| 77 | S&F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed. |
| 78 | S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed. |
| 79 | S&F in repair stack clamps out of 40mmx 3 mm flat iron and 12 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof for 100 mm pipe, complete all as specified and directed. |
| 80 | Ditto as per above item but 75 mm bore pipe. |
| 81 | Taking down chowkhats or frames with shutter of any description n exc 1.5 sqm each (without taking off shutters from the frame) Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4. |
| 82 | - ditto as per above but exc 1.5sqm and n exc 4sqm each - do -. |
| 83 | Taking down wooden/steel shutters of any description n. exc 2 sqm each complete all as specified and as directed by Enineer-in-charge |
| 84 | M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing. |
| 85 | S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at siteall as per direction of Engineer-In-Charge. Make : Rajshri /Black Cobra |
| 86 | S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at siteall as per direction of Engineer-In-Charge. Make : Rajshri /Black Cobra |
