|
| 1 | M&L for factory made second class soft wood wooden battens kiln dried spruce or pine profiled lumber, not less than 12mm thick, length 3000 mm & width 110-120 mm insert each other with male and female grooves fixed with nails to timber frame work as in wall/ceiling paneling, shelves etc and applying under coating and finishing coats of wood polishing complete all as specified and directed by the Engg-in-Charge.(Make-Beliy Ruchey or equivalent) |
| 2 | Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm in any position as in unframed work complete all as specified and directed by Engr-in-Charge. |
| 3 | S&F second clas soft wood fillets square or rectangular in section sectional area exceeding 13sq cm and n exc 25sq cm as in scantling secured with nails or brads complete all as specified and directed by the Engg-in-Charge. |
| 4 | M&L for laminated wooden flooring 8mm thick size 193mm x 1214mm of High density hard wood fibre board (HDF) with highly anti abrasive protective overlay and melamine impregnated decorative film with interlocking system, laid over 2mm thick foam with suitable arrangement including dismantling of existing old flooring complete all as specified and directed by the Engg-in-Charge. |
| 5 | M&L for Natural stone 18-25mm thick, thermal resistance can handle freeze- thaw well zero repainting cycle mathches Ladakh architectural context on wall cladding such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over & including 10mm thick rendering in CM (1:4) incl demolition of existing stone etc complete all as specified and directed by Engr-in-Charge. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the Engg-in-Charge. |
| 7 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15mm thick screed bed in CM ( 1:6) complete all as specified and directed by the Engg-in-Charge. |
| 8 | M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for coloured joint free Non-skid Ceramic tiles 9 to 10mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed by the Engg-in-Charge. |
| 10 | M&L for 25mm thick PCC 1:2:4. type B-0 (using 12.5mm graded aggregate) as in subbase to floor tiles or similar works complete all as specified and directed by the Engg-in-Charge. |
| 11 | Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed by the Engg-in-Charge. |
| 12 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed by the Engg-in-Charge. |
| 13 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by the Engg-in-Charge. |
| 14 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by the Engg-in-Charge. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engg-in-Charge. |
| 16 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engg-in-Charge. |
| 17 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by the Engg-in-Charge. |
| 18 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over 15mm thick screed bed in CM 1:4 complete all as specified and directed by the Engg-in-Charge. |
| 19 | S&F in repair Corner Encloser with one fixed glass and openable door-2 parts,finish-chrome model:1840-F/1140-F of Jaquar Cat No-JSE-CHR-140F0812419X, Ht:1950 W:800x1200 or equivalent complete all as specified and directed by the Engg-in-Charge. |
| 20 | S&F in repair wall hung Basin with fixing accessories size (600x435x185)mm of make -Jaquar Cat No.Kus-WHT-35801 pm or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 21 | S&F in repair Rimless Bowl with Cistern for Extended wall hung WC with PP soft closet seat corner, hinges, dual flush cistern fitting, accessories set of size 380x650x730mm of Jaquar Cat No, FLS-WHT-5353PPZ or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 22 | S&F in repair Urinal with spreader and fixing accessories set of size 340X380xx710mm of make Jaquar Cat No.URS-WHT-13265 or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 23 | S&F in repair single lever wall mixer with provission for overhead shower with 115mm long bend pipe on upper whole, convency legstand wall flangers of Make-Jaquarb Cat No.Kup-35117PM or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 24 | S&F in repair single lever wall mixer without provission for overhead shower with 115mm long bend pipe on upper whole, convency legstand wall flangers of Make-Jaquarb Cat No.Kup-35117PM or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 25 | S&F in repair overhead shower 140mm round shape single flow with Air effect (ABS Body and fave plate chrome plated) with rubit cleaning system of Make-Jaquar Cat No.OHS -1757 or equivalent complete all as specified and directed by the Engg-in-Charge. |
| 26 | S&F in repair Single lever Basin mixer without popup waste with 450mm long braided hoses of Make-Jaquar Cat No.Kup-35011BPM or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 27 | S&F in repair Single towel Rail 600mm long stanless steel of Make-Jaquar Cat No.AKP-35711PS or equvalent complete all as specified and directed by the Engg-in-Charge. |
| 28 | S&F in repair towel Ring square of Make-Jaquar Cat No.AKP-35721P or equivalent complete all as specified and directed by the Engg-in-Charge. |
| 29 | S&F in repair Soap dispenser with glass bottle of Make-Jaquar AKP-35735P or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 30 | S&F in repair toilet roll holder with stainless steel flap of Make-Jaquar AKP-35753PS or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 31 | S&F in repair towel rack 600mm long with lower hange stainless steel toilet roll holder of Make-Jaquar Cat No.ACN-11815 or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 32 | S&F in repair corner glass shelf with bracket of Make-Jaquar Cat No.ACN-1173 or eqvt complete all as specified and directed by the Engg-in-Charge. |
| 33 | S&F in repair 15mm Stop valve/angle cock cast copper alloy fancy type, chromium plated high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by the Engg-in-Charge. |
| 34 | S&F in repair CP health faucet with 1 meter flexible hose and stand complete all as specified and directed by the Engg-in-Charge. |
| 35 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20mm dia pipes complete all as specified and directed. |
| 36 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 25 mm dia pipes complete all as specified and directed. |
| 37 | S&F 20mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by the Engg-in-Charge. |
| 38 | All as per Item No.37 above but of 25mm outer diameter complete all as specified and directed by the Engg-in-Charge. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by the Engg-in-Charge. |
| 40 | S&F Angle Iron and FI as in staging for water tank and the like including caps bases splices etc built up from two or more beam or channel section angle with plate including all lattice bars stiffenes gusset plate etc (Fe-290quality A) complete all as specified and directed by the Engg-in-Charge. |
| 41 | Dismantling water storage tanks of capacity exc 500 & nexc 1000 ltrs and removing to store complete all as specified and directed by the Engg-in-Charge. |
| 42 | S&F Puf tank of capacity 1000 ltrs capacity incl hosting and fixing in position complete all as specified and directed by the Engg-in-Charge. |
| 43 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed by the Engg-in-Charge. |
| 44 | Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by the Engg-in-Charge. |
| 45 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by the Engg-in-Charge. |
| 46 | S&F 110mm bore PVC (SWR) bends with oval access door any radius complete all as specified and directed by the Engg-in-Charge. |
| 47 | S&F in repair Harrison rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by the Engg-in-Charge. |
| 48 | Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. |
| 49 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5 sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5 sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch complete all as specified and directed by the Engg-in-Charge. |
| 50 | All as per Srl item No.49 above but for one 3 pin 5Amps socket outlet on same board complete all as specified and directed by the Engg-in-Charge. |
| 51 | All as per Srl item No.49 above but using cable size 2.5Sqmm for one 3 pin socket outlet 5 Amps on independent board complete all as specified and directed by the Engg-in-Charge. |
| 52 | All as per Srl item No.49 above but using cable size 2.5Sqmm for one 3 pin socket outlet 15 Amps on independent board complete all as specified and directed by the Engg-in-Charge. |
| 53 | S&F Switch piano flush type 5 Amps, single pole one way complete all as specified and directed by the Engg-in-Charge. |
| 54 | S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed by the Engg-in-Charge. |
| 55 | S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type complete all as specified and directed by the Engg-in-Charge. |
| 56 | S&F Socket Outlet 2 in 1, 5 Amp flush type complete all as specified and directed by the Engg-in-Charge. |
| 57 | S&F ceiling rose on PVC square blocks surface bakelite 3 terminal complete all as specified and directed by the Engg-in-Charge. |
| 58 | S&F Bell push, flush type, 5 Amp complete all as specified and directed by the Engg-in-Charge. |
| 59 | S&F Electronic Ding Dong Bell, AC 240 volts single pole complete all as specified and directed by the Engg-in-Charge. |
| 60 | S&F Modular socket 6A-2/3 pin combined 2 module complete all as specified and directed by the Engg-in-Charge. |
| 61 | S&F Modular socket 6A/16 A -2/3 pin combined 2 module complete all as specified and directed by the Engg-in-Charge. |
| 62 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed by the Engg-in-Charge. Please Enable Macros to View BoQ information |
| 63 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed by the Engg-in-Charge. Please Enable Macros to View BoQ information |
