|
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof |
| 2 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steelbars. (a) In ground floor including roof. |
| 3 | Brick work with 1st class bricks in cement morter ( 1:4) (a) In foundation & plinth. |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cementmortar including rounding off or chamfering corners asdirected and raking out joints including throating, nosingand drip course, scaffolding/staging where necessary(First floor).[Excluding cost of chipping over concretesurface] |
| 5 | Hire and labour charges for shuttering withcentering and necessary staging upto 4 m usingapproved stout props and thick hard wood planksof approved thickness with required bracing forconcrete slabs, beams and columns, lintels curvedor straight including fitting, fixing and striking outafter completion of works (upto roof of ground floor,(a) 25 mm to 37 mm thick wooden shuttering upto roof of grund floor. |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with gradedstone chips (20 mm nominal size) excludingshuttering and reinforcement,if any, in gound flooras per relevant IS codes. |
| 7 | Reinforcement for reinforced concrete work in allsorts of structures including distribution bars,stirrups, binders etc initial straightening andremoval of loose rust (if necessary), cutting torequisite length, hooking and bending to correctshape, placing in proper position and binding with16 gauge black annealed wire at every intersection,complete as per drawing and direction.TATA/SAIL/RINL |
| 8 | Rendering the surface of wall and ceiling with white cement based wall putty of apoproved make & brand 1.50 mm thick. |
| 9 | M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I.intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mmc/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointingcompound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc.complete) In ground floor |
| 10 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification andas per direction of the EIC. (In Ground Floor)(a) One Coat i) Water based interior grade Acrylic Primer |
| 11 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)a) Normal Acrylic Emulsion |
| 12 | White wsahing including cleaning and smoothing surface throughly, |
| 13 | Colour washing with \\"ELLA\\" with a coat of white wash primingincluding cleaning and smoothening surface thoroughly :(i) Internal (all floors) (a) One coat Please Enable Macros to View BoQ information |
