|
| 1 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed. |
| 3 | Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 4 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 3000 lumen, system wattage 30 Watt (Warm White), Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 5 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 6000 lumen, system wattage 60 Watt (Warm White), Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 6 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 7200 lumen, system wattage 72 Watt, (Warm White) Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 7 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 9000 lumen, system wattage 90 Watt (Warm White), Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 8 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 10000 lumen, system wattage 100 Watt (Warm White), Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 9 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 20000 lumen, system wattage 200 Watt (warm White), Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 10 | M&L for LED garden light Bollard 10 watt(Warm) made up of high grade unbreakable polycarbonate material, IP-65 protection, cone series innovative design with uniformly lit diffuser at the upper portion inlc taking out old unsv garden light fittings complete all as specified and as directed. |
| 11 | S & F Post top lanterns 20 watt LED light fitting(Warm type) ,outdoor new generation, energy saving, environmental friendly, longlife with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories intenally prewired including connecting up with three core twisted flexible copper conductor cable up to cealing rose and necessary mounting arrangements, complete all as specified and as directed. |
| 12 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 3000 lumen, system wattage 30 Watt , Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 13 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 6000 lumen, system wattage 60 Watt, Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 14 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 7200 lumen, system wattage 72 Watt Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 15 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 9000 lumen, system wattage 90 Watt, Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 16 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 10000 lumen, system wattage 100 Watt, Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 17 | Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 20000 lumen, system wattage 200 Watt, Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 18 | M&L for LED garden light Bollard 10 watt made up of high grade unbreakable polycarbonate material, IP-65 protection, cone series innovative design with uniformly lit diffuser at the upper portion including taking down unserviceable light fitting and removing from site complete all as specified and as directed.. |
| 19 | S & F Post top lanterns 20 watt LED light fitting ,outdoor new generation, energy saving, environmental friendly, longlife with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories intenally prewired including connecting up with three core twisted flexible copper conductor cable up to cealing rose and necessary mounting arrangements including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 20 | Supply and fixing water proof LED type Fountain Multicolour light of 15 Watt with SMPS controlled complete with all accessories internally prewired and necessary mounting arrangement including nessary connection including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 21 | Supply and fix of Lithium based Energy Efficient Integrated Solar Street light on pole of capacity 15 Watt in Single FRP body encases Solar PV Panel 60W Monocrystalline , Lithium Battery 12.8V 30 Ah with inbuilt BMS, High brightness W-LED(160-180 lm/watt) lamp, CRI >70, Color Temperature 6500K, Microcontroller based charge controller cum driver, automatic dimming function with PIR Motion Sensor, Dusk to Down Operation, Working temperature: (-) 10C to (+)60C, Weight: 11-13 kg, with adjustable MS clamp suitable for pole/wall mounting. Protections: Short Circuit, overload, Reverse polarity and battery protections. Firm should produce vital parameters test report from NABL accredited lab and should be of made in India with CE & ROHS certified including taking down unserviceable light fitting and removing from site complete all as specified and as directed. |
| 22 | Supply and fix of 5 meter MS tubular octagonal pole with Red oxide paint and base plate (200x200x6mm) complete all as specified and as directed. |
| 23 | M&L UPVC conduit pipe heavy duty 25 mm dia including excavation work for laying cable in conduit complete all as specified and as directed. |
| 24 | M&L for PVC insulated unarmoured aluminium conductor cable 4 sqmm 2 core complete all as specified and as directed. |
| 25 | M & L for cement concrete 1 :3 :6 type C-1 using 20 mm graded aggregate in foundation and stay including necessary form work complete all as specified and as directed. |
| 26 | M&L for repairing of mechanism of lowering down and hoisting of flood light cage (mobile Head frame) of High mast assy of 16 mtr height, repairing, servicing of hoisting motor assy, repairing of chain, greasing of moving parts and replacement of steel rope, pulley ,repairing of elevator wrench system etc, relaying of rope from top to bottom and making the mechanism functional complete all as specified and as directed. |
| 27 | M&L for winding of induction motor of single phase, 1 HP, 240 V, 50 Hz of High mast of hoisting and lowering mechanism of flood light cage with super eamelled winding wire of existing gaudge , replacement of bearing as per existing etc to make the motor functional complete all as specified and directed. |
| 28 | M&L for repairing of Control Panel of Hight mast assy , repair / replacement of unserviceable parts like MCB, Contractor, auto manual switch, NO + NC switch , starter motor , replcement of u/s indicators, start stop switch , reapiring and complete wiring of panel with min 1.5 Sqmm wire complete all as specified and as directed. |
| 29 | Material and labour for earthing complete with galvanized steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on complete all as specified and as directed. Please Enable Macros to View BoQ information |
