|
| 1 | Dismantling of RCC posts or struts of any section incl. taking out embedded portion and making good of disturbed ground (posts embedded in natural ground) etc complete all as specified. |
| 2 | All as per item 1 above here-in-before but posts embedded in concrete. |
| 3 | Dismantling chain link fencing of any type fixed in any situation including flat iron MS round bars, mounted on nuts & bolts etc complete all as specified. |
| 4 | Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. |
| 5 | M/L for providing PCC 1:4:8 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete. |
| 6 | S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 7 | Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as specified & directed. |
| 8 | Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly. |
| 9 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 10cm but n.exc 20cm long and dia of neck 11 to 15mm. |
| 10 | M&L Mild steel round bars, 10mm dia cut to length weared and securing chain link fencing to fencing posts, complete all as specified and as directed |
| 11 | S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured). |
| 12 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 13 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 14 | M&L for preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm in width or girth of surfaces complete all as specified and directed. |
| 15 | M&L for preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. |
| 16 | Demolition of stone masonary of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc. Complete all as specified and directed. |
| 17 | M&L for squared rubble walling Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed. |
| 18 | Ditto item No 17 above but except stone complete all as specified and directed. |
| 19 | Extra over of hammer dressing to face stone with maximum depression on face from straight edge not exc 20mm and dressing face bed and joints as specified to squared rubble walling jodhpur type brought upto cources as directed |
| 20 | Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified |
| 21 | M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:4 all as specified. |
| 22 | M&L for applying two coats of cement base paint over a coat of primer on walls including preparation of newly plastered/ pointed surface complete all as specified and directed. |
| 23 | M&L PCC 1:3:6 type C1 using 20mm graded aggregate as in coping including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 24 | M&L Broken glass coping on top of walls in CM 1:3 complete all as specified & directed. |
| 25 | Demolition of cement concrete (Unreinforced) of any description and in any position not otherwise specically provided for. |
| 26 | M&L for providing precast cement concrete type B-1 (1:2:4) with 20mm graded stone aggregate in copings apex stones,columns,posts,boundary pillars,frame of Jallies etc and setting in mortar 1:4 complete with joints to match. |
| 27 | Dismantling of Trellies work(Jafri),Including taking as under of battens in trellies(posts and rails measured separately) |
| 28 | M&L for 35mm thick precast cement concrete louvres and Jallies type C-0(1:3:6) using 12.50mm graded stone aggregate(Measured solid) including all mouldings and frame set in cement mortar 1:4. |
| 29 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) etc.complete all as specified and directed. |
| 30 | M&L for 75 mm thick PCC , (1:4:8) type D-2, (using 40mm graded stone aggregate) as in sub base for floor complete all as specified and directed. |
| 31 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed. |
| 32 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed. |
| 33 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 34 | M&L for PCC 1:3:6 using 20mm graded stone aggregate as in surface channelsand drains complete all as specified and directed. |
| 35 | M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement. |
| 36 | Supply only integral water proofing compound. |
| 37 | M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry external surface of walls finished the surface even and smooth without using extra cement. |
| 38 | Material and labour for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone agg as in coping of manhole including necessary form work complete all as directed. |
| 39 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as directed.Note - The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
