|
| 1 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick wall care putty including complete removal of existing treatment of any layer on wall complete all as specified and directed. |
| 2 | M&L for preparing old plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed. |
| 3 | M&L for preparing old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 4 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed. |
| 5 | M&L for preparation of old plastered or unplastered surfaces of wall/ Ceiling by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincally and applying one coat of white wash complete all as directed and specified. |
| 6 | M&L for preparing old plastered or unplastered surface of walls and applying one coat of cement based paint complete all as specified and directed. |
| 7 | Complete removal of old decorated surface of wall preparation old plastered surfaces of wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade ,Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Complete all as specifiedspecified and directed. |
| 8 | M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint of selected colour complete all as specified and directed. |
| 9 | M&L for preparation of old wooden surfaces of any description and applying one coat of synthetic enamel paint of selected colour complete all as specified and directed. |
| 10 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet |
| 11 | M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified |
| 12 | M & L for 12mm thick Seamless calcium silicate ceiling made of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish with and including Gl frame work size of grid (605 mm x 605 mm) direction of Engr-in-charge as per site reqmt seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applying two coats of oil bound distemper over acoat of primer complete all as specified. |
| 13 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 14 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 15 | Taking down shutter of any description but n. exc 1 sqm each complete all as specified and directed. |
| 16 | Taking down shutter of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 17 | Taking down shutter of any description exc 2 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 18 | M&L PCC 1:3;6 type C1 (using 20mm graded crushed stone aggregate) as in steel chowkhats, hold fasts and bed blocks etc including necessary form work complete all as specified and directed. |
| 19 | S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 20 | Ditto- as item No 11 above but 105x60mm |
| 21 | S&F 30mm thick flush shutters, solid core onstruction, with particle board core and plywood face panels, commercial type on both sides, both face, is covered with decorative face veneer with lipping/frame to match complete as directed |
| 22 | Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a),both face, is covered with decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified. |
| 23 | S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed. |
| 24 | S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2020 Part II complete all as specified and directed. |
| 25 | S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 26 | S&F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/m including necessary joining cleats, al powder coated glazing clips, rubber neoprene packing, Al powder coated handles 2 Nos in each door, Al powder coated tower bolt 02 Nos, hinges 03 Nos, Al powder coated snap beading, screws, door stopper 01 No etc. complete all as specified. Note :- Glass pane and particle board shall be measured and paid seprately. |
| 27 | S&F anodised powder coated window and ventilator shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M inclusive aluminium handle / handle slot, locking arrangement etc complete all as specified and directed (Note :- Glass pane/wire mesh shall be measured and paid sepertely) |
| 28 | S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed. |
| 29 | Supply only 4.0mm sheet glass, ordinary quality n exc 0.5 sq. m in each pane |
| 30 | Supply only stainless steel wire 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed |
| 31 | Supply only 9 mm thick prelaminated particle board interior gde prelaminated both side with decorative choice lamination fixed with screws as in aluminium partation & aluminium door shutter etc all as directed. |
| 32 | Supply only powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved nodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 33 | S&F stainless steel butt hinges 100mm, medium weight complete |
| 34 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 35 | S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 36 | S&F 150mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 37 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 38 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 39 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 40 | S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish) |
| 41 | S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section body) complete all as specified and directed |
| 42 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 43 | Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land at the location notified complete all as specified and directed. |
| 44 | Demolition of brick work / Stone masonary / PCC block masonary build in cement morter of any description and removing of rubbish from the premices. |
| 45 | M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde C-5 and setting in CM 1:6 complete all as specified and directed. |
| 46 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 47 | M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 48 | M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed. |
| 49 | M&L provinding cement concrete (1:2:4) B-1 as in copings /haunching/ bearing course over brick walls etc and like complete all as specified. |
| 50 | M & L non skid ceramic coloured tiles 600X600 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete. |
| 51 | .Ditto but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 52 | M&L for coloured glazed ceramic tiles in vertical surface 300X 450X 7 mm/300x600x7mm/450x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified. |
| 53 | M & L Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement slurry and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed. |
| 54 | M & L Non - skid ceramic coloured tiles,size 400x400x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement slurry and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed. |
| 55 | M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 56 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 57 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 58 | M&L 18-20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface complete |
| 59 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 60 | M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified |
| 61 | M&L machine cut kota stone slab flooring 20- 25mm thick over and including 20mm screed bed CM(1:4)cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 62 | Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. |
| 63 | Taking down Cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, any description complete all as specified and directed. |
| 64 | M&L rendering 15mm thick on stone masonary surfaces other than fair faces of brick surfaces work or stone surfaces in CM 1:6 finished even and smooth without using extra cement |
| 65 | M&L rendering 15mm thick in CM 1:4 on brick /stone surfaces finished even and smooth without using extra cement complete all as specifiwd as directed. |
| 66 | All as above but 10mm thick in CM 1:3 as in ceiling complete all as specified and directed |
| 67 | M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 68 | M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer of same make over external wall surfaces complete all as specified and as directed. |
| 69 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over a thin layer of wall care putty complete all as specified and directed. |
| 70 | Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 71 | Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 72 | S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed. |
| 73 | S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed. |
| 74 | S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling all as specified in SSR Part-I complete all as specified and directed. |
| 75 | S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling all as specified in SSR Part-I complete all as specified and directed. |
| 76 | S&F in repair vitreous china single piece pedestal pattern water closet white 'P' or 'S' trap, matching sheet cover and connection to trap . including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-851 or Techno commercial equivalent model in KOHLER and ROCA. |
| 77 | S&F in repair 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-CHR-5047N or equivalent model in KOHLER and ROCA. |
| 78 | S&F in repair 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-CHR-5053N or equivalent model in KOHLER and ROCA. |
| 79 | S&F in repair Brass CP wall mixer 3-in-1 for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Make Jaquar cat part no:FLR-CHR-5281N or equivalent model in KOHLER and ROCA. |
| 80 | S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-CHR-1989 or equivalent model in KOHLER and ROCA. |
| 81 | S&F in repair 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-CHR-5015 or equivalent model in KOHLER and ROCA. |
| 82 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA. |
| 83 | S&F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 10cm wide with chromium plated bracket guard and railing 60cm long.Make Jaquar cat part no:CAN-CHR-1171 N or Techno commercial equivalent model in KOHLER and ROCA. |
| 84 | S&F in repairs chromium plated soap dish approximate size 120x 120x28mm complete all as specified and directed.Make Jaquar cat part no:AKP-CHR-35731P or Techno commercial equivalent model in KOHLER and ROCA. |
| 85 | S&F in repair tubular towel rail, 20mm dia, D type, 60cm longv between flanges Make Jaquar cat part no:AKP-CHR-35711PS or Techno commercial equivalent model in KOHLER and ROCA. |
| 86 | S&F in repair 2-way Bib cock with flange Make Jaquar cat part no:FLR-CHR-5041N or Techno commercial equivalent model in KOHLER and ROCA. |
| 87 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 88 | Supply and fixed in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed |
| 89 | Supply and fixed in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete |
| 90 | S&F Stainless Steel Kitchen rack (Overall size 24x24x10”) complete all as specified and directed. Make : Cat No. P-310 of Prayag / Blue Star / Nirali |
| 91 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one. |
| 92 | S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed. |
| 93 | Supply and fixing in repair 600mm X 450mm bevelled edge mirror of selected quality mounted on plastic frame covered back with commercial and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specified. |
| 94 | Supply and fixed in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to arf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. |
| 95 | Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 96 | S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets and 32mm dia 1mtr long PVC waste pipe. |
| 97 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) inclusing health faucet. |
| 98 | Dismantling cast iron work of any de scription and in any position |
| 99 | S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 100 | .ditto- but 75mm bore |
| 101 | S&F 110mm PVC (SWR) bands |
| 102 | S&F 75mm PVC (SWR)bands |
| 103 | S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed. |
| 104 | S&F PVC (SWR) cowl 75/100mmdia as required complete |
| 105 | S & F in repairs brass chromium plated Tubular towel rail 20mm dia \\"D\\" type 60cm long. |
| 106 | S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete. Please Enable Macros to View BoQ information |
