|
| 1 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete |
| 2 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick/concrete surface finished even and smooth without using extra cement complete. |
| 3 | M&L for preparing new plastered surface of wall incl cornice /corner and applying two coats of Oil Bound Distemper over a coat of primer complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick in CM 1:4 mixed with WPC @ 3% by weight of cement on other than fair faces of brick/concrete surface finished even and smooth without using extra cement complete. NOTE :- WPC will be measured and paid seperately |
| 5 | Supply only WPC of approved make |
| 6 | M&L for preparation of new plastered surface of wall including cornice and applying two coats of cement base paint over a coat of primer complete all as specified and direced. |
| 7 | M&L for providing wall care putty not less than 2mm thick on new/old surface of wall including complete removal of old treatment on old suiface of wall all as sspecified and direced by Engr-In-Charge. |
| 8 | M&L for rendering 05mm thick in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for preparing new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed |
| 10 | M&L for preparing old plastered surface of ceiling and applying two coats of white wash complete all as specified and directed |
| 11 | Demolition of brick work built in CM |
| 12 | M&L for brick work with sub class 'B' brick straight or curved onplan exc 6 m mean radius built in CM 1:6 |
| 13 | M&L for brick work with sub class 'B' brick work straight or curved on plan in any radius in half brick thick wall built in CM 1:4 complete all as specified and directed |
| 14 | M&L for preparing old plastered surface of wall and applying one coat of cement base paint complete all as sspecified and directed. |
| 15 | M&L for preparing old plastered surface of wall and applying one coat of Oil Bound Distemper complete all as sspecified and directed. |
| 16 | M&L for preparing old plastered surface of wall and applying two coats of Oil Bound Distemper over a coat of primercomplete all as sspecified and directed. |
| 17 | M&L for preparing old plastered surface of wall and applying one coat of white wash complete all as sspecified and directed. |
| 18 | M&L for preparing old wood based surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as sspecified and directed |
| 19 | M&L for preparing old steel based surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as sspecified and directed |
| 20 | M&L for preparing old plastered surface of wall not otherwise described over 10cm width or girth and applying two coats of plastic emulsion paint over a coat of primer complete all as sspecified and directed. |
| 21 | M&L for letter Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high including one coat of synthetic enamel paint complete all as specifed. |
| 22 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 23 | Material & Labour for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 24 | S&F in repair GI Water tubing/pipe of 15mmm dia with all necessary fittings fixed dto wall, ceiling, floor or trenches including taking down complete all as specified and directed |
| 25 | S&F in repair GI Water tubing/pipe of 20mmm dia with all necessary fittings fixed dto wall, ceiling, floor or trenches including taking down complete all as specified and directed |
| 26 | S&F in repair 15mm bore angle valve CP high pressure screwed for iron pipe or brass ferrule complete all as specified and directed |
| 27 | S&F in repair 15mm bore two way angle valve CP high pressure screwed for iron pipe or brass ferrule complete all as specified and directed |
| 28 | S&F in Repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-In-Charge |
| 29 | S&F in repair Stop valves, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-In-Charge |
| 30 | S&F in repair Bib taps, cast copper alloy chromium plated fancy type of 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-In-Charge |
| 31 | S&F in Repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms). complete all as specified and directed by Engr-In-Charge |
| 32 | S&F in Repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed by Engr-In-Charge |
| 33 | S&F in repair PVC valveless syphonic action type flushing cistern low level , white colour 10 ltr capacity with inlet and outlet ball valve, handle including cast iron/PVC bracket & 32mm bore PVC flush pipe & PVC Connection pipe complete all as specified and directed. |
| 34 | S&F in repair Vitreous China WHB white colour of size 600 x 480mm flat back or angle back type including angle iron bracket , waste coupling, waste pipe 32mm bore of required length fixed in position complete all as specified and directed by Engr-In-Charge |
| 35 | S&F in repair Vitreous China squatting pattern pan , Orrisa pattern 580 x 440mm white with integral foot rest including connection tom trap and to flushing pipe , anti syphonic pipe including making good to floor with PCC 1:2:4 or cement sand Mortar 1:3 complete all as specified and directed by Engr-In-Charge |
| 36 | S&F in repair Vitreous China Wash down water closet pan paddestal pattern white with including fixing bolts excluding ( flushing cistern, & Flush pipe) connection to trap and to flushing pipe , anti syphonic pipe including seat cover with making good to floor with PCC 1:2:4 or cement sand Mortar 1:3 complete all as specified and directed by Engr-In-Charge |
| 37 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm long and fixed in position |
| 38 | S&F in Repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32/40mm 45gms/40mm-60 gms) |
| 39 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or wall fixed with clamp 110mm dia complete all as specified and directed by Engr-In-Charge. |
| 40 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or wall fixed with clamp 75mm dia complete all as specified and directed by Engr-In-Charge. |
| 41 | S&F in repair PVC (SWR) bends of 110mm dia |
| 42 | S&F in repair 110mm dia PVC Floor trap (P or S) trapmincluding grating fixed in position complete |
| 43 | S&F in repair PVC (SWR) bends of 75mm dia |
| 44 | S&F in repair 75 mm dia PVC Floor trap (P or S) trap including grating fixed in position complete |
| 45 | S&F in repair Chromium plated shower rose with or without swivel type of 125mm dia and fixed in position complete all as specified and directed by Engr-In-Charge |
| 46 | S&F in Repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 47 | S&F in repair stainless steel soap dish ISI Mark and fixed in position complete |
| 48 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 49 | S&F in repair Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges and fixed in position |
| 50 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washersfixed in position complete all as specified and directed by Engr-In-Charge |
| 51 | S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-In-Charge |
| 52 | Taking down door chowkhat (without taking off shutters from the frames) area n . Exc 1.50 Sqm |
| 53 | Taking down door chowkhat (without taking off shutters from the frames) area Exc 1.50 Sqm but n. exc 4.00 Sqm each |
| 54 | Taking down door shutters of any description area exc 1.00 Sqm but n. exc 2.00 Sqm |
| 55 | S&F in repair sheet glass ordinary quality 3.0 mm thick and glazing with oil putty in square n. exc 0.50 Sqm in each pane |
| 56 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-In-Charge |
| 57 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed by Engr-In-Charge |
| 58 | M&L for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as specified and directed by Engr-In-Charge |
| 59 | M&L for PCC 1:2:4 type B1 using 20mm graded aggreagate for filling in steel door frame ccomplete all as specified and directed. |
| 60 | M&L for preparing new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-In-Charge |
| 61 | M&L for Flush shutters, 35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-In-Charge |
| 62 | M&L for Glazed and skeleton shutters, 30mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-In-Charge |
| 63 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-In-Charge |
| 64 | S&F in repair Aluminium anodised curtain rod of 20mm dia fixed with one pair of brackets in each winddow and doors decorative type complete all as specified and directed by Engr-In-Charge. (NOTE:_( Bracket will be measured and paid seperately) |
| 65 | S&F Aluminium anodised brackets ( Having two bracket in each pair ) and fixed in each winddow and doors decorative type complete all as specified and directed by Engr-In-Charge. |
| 66 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple of 300 mm long (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 67 | S&F mild steel Butt hinges, medium weight, cold rolled mild steel, and fixed in position of 100mm long |
| 68 | S&F mild steel Butt hinges, medium weight, cold rolled mild steel, and fixed in position of 75mm long |
| 69 | S&F Aluminium anodised, barrel tower bolts of ex truded section and fixed of 200 mm long |
| 70 | S&F Aluminium anodised, barrel tower bolts of ex truded section and fixed of 125 mm long |
| 71 | S&F for Extruded aluminium alloy handles, fabricated type, anodised of 150mm long |
| 72 | S&F for Extruded aluminium alloy handles, fabricated type, anodised of 125mm long |
| 73 | S&F in PVC connection with brass ferrul on both end and screwed on iron pipe of 15mm dia 60 cm long and fixed in position Please Enable Macros to View BoQ information |
