|
| 1 | Engaging plumber (Av) for attending all day to day maintenance complaints of plumbing & sanitary items / water supply installations etc complete excluding the cost of materials but including cost of washers, nails, clamps, screws , M-seal, taplon, drill machine, bit etc. and all lead & lift etc. complete as per direction of Engineer-in-Charge. The material required for maintenance shall be arranged at site by the agency and will be paid separately. For the purpose of attending day to day complaints, one plumber should be available daily and one log book has to be maintained by the staff of contractor duly verified by SDO/JTO(Civil) on daily basis as a proof of attending complaints. (One job will be defined / consists execution of all above items for all required / working days (8 hours) in a month). Cost of all T&P like washers, nails, clamps, screws, M-seal, taplon, drill machine, bit, ladder etc. including 0.50 HP Electric motor for developing water pressure to clean chowakage in GI pipe line if required etc. for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of \\"supply of material \\" of the agreement. |
| 2 | Engaging helper /beldar for attending day to day maintenance jobs.(One job will be defined /consists execution of all items for the working days as well as on holidays (8 hours in a day) as when required in a month) & for plumbing job and for other misscellaneous works such as cleaning roof, cutting bushes, grass etc. including the total cost of ladder, tagari, phawra etc. for all jobs. |
| 3 | Attending day to day complaint of chocking / blocking of drainage and sewerage items such open drain, nahani trap, gully trap, and manholes out/ inside the quarters/ building complete as per direction of engineer-in-charge i/c required Acid, bamboo, cleaning rod, ladder, rope etc, will be provided by the agencey.(One job will be defined /consists execution of all items for the working days as well as on holidays for 8 hours in a day as when required in a month) |
| 4 | SUPPLY OF MATERIAL |
| 5 | BRACKET - C. I. |
| 6 | For wash basin and sinks. |
| 7 | Brass Bib cock. |
| 8 | 15 mm dia. |
| 9 | Brass stop cock. |
| 10 | 15 mm dia |
| 11 | PTMT BIB COCK 15 MM |
| 12 | 15 mm nominal bore, 122mm long, weighing not less than 99 gms |
| 13 | PTMT Stop COCK 15 MM dia (male thread) |
| 14 | PTMT PILLAR COCK 15 MM |
| 15 | PTMT Ball Cock 15 mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 16 | PTMT Swiveling shower 15 mm |
| 17 | PTMT WASTE COUPLING 31 mm of 79mm length and 62 mm breadth weighing not less than 45 gms |
| 18 | PTMT - Urinal Spreader 15 mm |
| 19 | P.T.M.T. Urinal cock 15 mm dia |
| 20 | PTMT Towel rail |
| 21 | a) 450 mm long |
| 22 | b) 600 mm long |
| 23 | G.I.Pipes. |
| 24 | a) 15 mm dia. |
| 25 | B) 20 mm dia. |
| 26 | G.I. UNIONS. |
| 27 | a) 15 mm nominal bore. |
| 28 | b) 20 mm nominal bore |
| 29 | c) 25 mm nominal bore |
| 30 | d) 40 mm nominal bore |
| 31 | c) 50 mm nominal bore |
| 32 | C.P. brass angle valve for basin and gyser points |
| 33 | 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size |
| 34 | WASH BASIN. |
| 35 | Flat back wash basin (Vitreous China) |
| 36 | a) 550 x 400 mm. |
| 37 | Mirror with white plastic moulded frame. |
| 38 | a) Rectangular shape 453 x 357 mm (Outer dimention) |
| 39 | P.V.C. waste pipe semi rigid type for sink and wash basin including PVC waste fittings. |
| 40 | a) 32 mm dia length not less than 700 mm. |
| 41 | FLUSHING CISTERN |
| 42 | a) PVC 10 litres capacity (low level) - (white ) (with fittings, accessories and flush pipe complete ) |
| 43 | Vitreous china half stall urinal of size 580x380x350 mm with steel hooks. |
| 44 | Unplasticised PVC connection pipe with brass union |
| 45 | (a) 45 cm long, 15mm bore |
| 46 | Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement |
| 47 | Providing sanitary fitting |
| 48 | a) Plastic seat cover for european W.C. |
| 49 | b) C.P. brass waste 32 mm |
| 50 | c)Orrisa pattern W.C. of size 580x440mm |
| 51 | d) Vitreous china pedestal type water closet |
| 52 | Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A |
| 53 | a) 110mm diameter |
| 54 | b) 75mm diameter |
| 55 | unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A |
| 56 | Single tee with door |
| 57 | 75x75x75 mm |
| 58 | 110x110x110 mm |
| 59 | Single tee without door |
| 60 | 75x75x75 mm |
| 61 | 110x110x110 mm |
| 62 | Bend 87.5° |
| 63 | 75 mm bend |
| 64 | 110 mm bend |
| 65 | UPVC plain shoe |
| 66 | a) 110mm diameter |
| 67 | b) 75mm diameter |
| 68 | UPVC pipe clip |
| 69 | a) 110mm diameter |
| 70 | b) 75mm diameter |
| 71 | Providing a Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 72 | a) Kitchen sink without drain board of size 610x510 mm bowl depth 200 mm with all accessories. |
| 73 | B) Kitchen sink C.I. brackets |
| 74 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long withS.S. tringular plate for Eureopean type W.C. |
| 75 | C.P.V.C. Pipes. |
| 76 | a) 20 mm dia.outer dia. Pipes. |
| 77 | b) 25 mm dia outer dia. Pipes. |
| 78 | c) 40 mm nominal outer dia. Pipes. |
| 79 | d) 50 mm nominal outer dia. Pipes. |
| 80 | e) 62.50 mm nominal inner dia. Pipes. |
| 81 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 82 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 83 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. |
| 84 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 85 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 86 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 87 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 88 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : |
| 89 | Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 90 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete. |
| 91 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 92 | 12 mm cement plaster of mix : |
| 93 | 1:6 (1 cement: 6 coarse sand) |
| 94 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 95 | 1:6 (1 cement: 6 coarse sand) |
| 96 | 20 mm cement plaster of mix : |
| 97 | 1:4 (1 cement: 4 coarse sand) |
| 98 | 6 mm cement plaster of mix : |
| 99 | 1:3 (1 cement: 3 fine sand) |
| 100 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge. |
| 101 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 102 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 103 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 104 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)including disposal of malba. |
| 105 | Credit to the department for unserviceable scrapped angle iron , flates, wires, pipes etc. |
| 106 | Credit of brass Bib cock /stop cock/ half turn valve / wheel valve of 15 mm size. |
| 107 | Credit of brass Bib cock /stop cock/ half turn valve/ wheel valveof 20 mm size. |
| 108 | Credit of brass Bib cock /stop cock/ half turn valve/ wheel valve of 25 mm size. |
| 109 | Credit of pillar cock of 15 mm size. |
| 110 | Credit of brass items of any size and any type such as wheel valve / pillar cock body/ spindals etc. |
| 111 | G.I. pipe. |
| 112 | 15 mm |
| 113 | 20 mm |
| 114 | 25 mm |
| 115 | 40 mm |
| 116 | 50 mm |
| 117 | Credit of G.I. items of any size and any type such as pipe/ sheet or other materials etc. |
| 118 | Credit of Water storage PVC tank with or without covers. |
| 119 | Credit of P.V.C. Bib cock/ Pillar cock /stop cock/ball cock etc. 15 mm size. |
| 120 | Credit of P.V.C. flushing Cistern up to 10.00 Litre capacity. |
| 121 | S.C.I. pipe. |
| 122 | 75 mm |
| 123 | 100 mm |
| 124 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. |
| 125 | STAINLESS STEEL GRATING. |
| 126 | a) 100 mm dia. |
| 127 | G.I. ELBOWS. |
| 128 | a) 15 mm dia. |
| 129 | b) 20 mm nominal bore. |
| 130 | G.I. REDUCERS |
| 131 | a) 25 mm to 20 mm or 15 mm dia. |
| 132 | G.I.NIPPLES 15 mm dia |
| 133 | a) 50mm long |
| 134 | b)100 mm long |
| 135 | c)150 mm long |
| 136 | d) 200 mm long |
| 137 | e) 225 mm long |
| 138 | G.I.NIPPLES 20 mm dia |
| 139 | a) 50mm long |
| 140 | b)100 mm long |
| 141 | c)150 mm long |
| 142 | G.I.socket |
| 143 | a) 15 mm nominal bore. |
| 144 | b) 20 mm nominal bore. |
| 145 | c) 25 mm nominal bore. |
| 146 | C.P.V.C. ELBOWS. |
| 147 | a) 20 mm dia. |
| 148 | b) 25 mm dia. |
| 149 | c) 40 mm dia. |
| 150 | C.P.V.C. Tee |
| 151 | a) 20 mm dia. |
| 152 | b) 25 mm dia. |
| 153 | c) 40 mm dia. |
| 154 | d) 50 mm dia. |
| 155 | C.P.V. C. UNIONS. |
| 156 | a) 20 mm nominal bore. |
| 157 | b) 25 mm nominal bore. |
| 158 | b) 40 mm nominal bore. |
| 159 | c) 50 mm nominal outer dia. Pipes. |
| 160 | d) 62.50 mm nominal inner dia. Pipes. |
| 161 | C.P.V.C. Socket |
| 162 | a) 20 mm nominal bore. |
| 163 | b) 25 mm nominal bore. |
| 164 | c) 40 mm dia. |
| 165 | c) 50 mm dia. |
| 166 | C.P.V.C. FT / MT |
| 167 | a) 20 mm dia. |
| 168 | b) 25 mm dia |
| 169 | c) 40 mm nominal outer dia. Pipes. |
| 170 | c) 50 mm nominal outer dia. Pipes. |
| 171 | d) 62.50 mm nominal inner dia. Pipes. |
| 172 | C.P.V.C. Gate wall |
| 173 | a) 20 mm nominal bore. |
| 174 | b) 25 mm nominal bore. |
| 175 | C.P.V.C. Over head tank connection |
| 176 | a) 20 mm nominal bore. |
| 177 | b) 25 mm nominal bore. |
| 178 | c) 40 mm nominal bore. |
| 179 | Brass Handle Valve (lever-handle) of ISI marked of good quality. |
| 180 | a) 15 mm nominal bore. |
| 181 | b) 20 mm nominal bore. |
| 182 | c) 25 mm nominal bore. |
| 183 | d) 40 mm nominal bore. |
| 184 | C.P.brass pillar tap |
| 185 | (a) 15mm dia. |
| 186 | Brass health faucet with 1.00 meter hose pipe of approved brand. |
| 187 | (a) Brass health faucet of 15mm dia. |
| 188 | (b) 1.00 meter hose pipe for brass health faucet with wall hook if required. |
| 189 | Supply of PVC overhead tanks cover of any size of approved manufacture and as per requirment of specification etc. |
| 190 | Brass Spindle for Mixer/Angle valve/Bibcock/ stop cock/ Pillar Taps.-(a) 15 mm nominal bore. |
| 191 | X Nipple (a) 15 mm nominal dia |
| 192 | PVC flush bend pipe of required size |
| 193 | Flushing cistern Handle/ Knob |
| 194 | Cistern kit for flushing i/c handle |
| 195 | 100 mm PVC trap |
| 196 | Supplying of 150 mm dia PVC pipe of ISI best quality as per direction of E/C. |
| 197 | Supplying of Kota stone of size 0.60 x 0.75 metre of 25 to 30 mm thick for manhole cover at site etc. all complete as per direction of engineer-in-charge. |
| 198 | Providing and laying manhine cut sand stone patty thickness of 40 mm to 50mm on sewer chamber and levelling all complete as per direction of engineer-in-charge. |
| 199 | Supply of PVC overhead tanks cover of any size of approved manufacture and as per requirment of specification etc. |
| 200 | Supplying of epoxy bonding agent like PIDICRETE URP of Dr. FIXIT or ROFF brands of PIDILITE or STP or equivalent material as a bonding agent at site as per direction of Engineer - in - Incharge. |
| 201 | Supplying of Asian Smart Care crack seal / Dr. Fixit Crack seal putty or equivalent product at site to repair crackes in masonary/ plaster/ terrace plaster in external and internal plastered surface of buildings. The mix can be applied at plaster consistency and as per manufacturer ' s & specifications and as per direction of Engineer - in - Incharge. |
| 202 | Providing and applying Asian Paints SmartCare Damp Proof / Pidilite brand or equivalent material for stopping roof leakage with the following procedure, in the presence of the site in-charge:(i) Clean and wash the surface thoroughly.(ii) Fill cracks with Asian SmartCare Crack Seal / Dr. Fixit Crack Seal Putty.(iii) Apply the first coat of Damp Proof with 33% water dilution.(iv) Apply the second coat of Damp Proof without dilution, using Joint/Roof Tape.(v) Apply the third coat of Damp Proof without dilution.The drying time between each coat shall be 4 hours.All works shall be completed as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
