|
| 1 | Total of Schedule-A + Schedule-B |
| 2 | Total of Schedule-A |
| 3 | Total of Schedule-B OEM-2176 APPENDIX- 3A PROFORMA FOR STATEMENT OF MINOR DEVIATIONS (Refer Clause C 2.2(d) and C 15.1 of ITT) 1. The following are the particulars of minor deviations from the requirements of the Tender Document: Sr. No Clause Deviations Price reduction for each deviation/s Note : 1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer. 2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents. 3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid. 4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect. Signature of authorized signatory On behalf of Tenderer OEM-2176 BOQ Preamble |
| 4 | The bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers, Special Conditions of contract, Employers Requirements, Technical Specfications, GCC etc. |
| 5 | BoQ consists of two schedules i.e. Schedule-A and Schedule-B. |
| 6 | Tenderers shall quote their offer in Indian Rupees (₹) only. Tenderers are required to quote percentage (%) (Excess/Less) in figures in the appropriate highlighted cells in Excel sheet namely 'BoQ1' against given schedules. |
| 7 | The rates and prices to be tendered in the unit Priced Bill of Quantities are for completed and finished items of works and complete in all respect. It will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/ overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.4 & C2.5 of ITT & clause 9 of SCC. |
| 8 | If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-responsive and shall be rejected. |
| 9 | Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions. |
| 10 | The Financial Proposal (as per BOQ) shall be uploaded online on the website http://eprocure.gov.in/eprocure/app. The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates in BOQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission. |
| 11 | The actual work executed against all the BOQ as detailed in tender document would be paid as per clause 14 of Special Conditions of Contract (SCC) and clause-15 of ER. |
| 12 | The price offer in BOQ shall be given without consdering any deviation mentioned in Appendix-3 of FOT i.e. price in this box shall be quoted as per tender condition without any deviation. Please Enable Macros to View BoQ information DELHI METRO RAIL CORPORATION LIMITED Bill of Quantity (BOQ) Name of work: Contract:-OEM-2176: “Maintenance Contract for Firefighting inside pump room & associated accessories over L-1, L-2, L-3, L-4 & Metro Bhawan including Staff Quarters of Shastri park, Najafgarh, Gurugram, Yamuna Bank, New Ashok Nagar, Noida Sector-50, Vidhan Sabha & Metro Enclave and Depot of Shastri park, Khyberpass, Badli, Sultanpur, Najafgarh, Yamuna bank & Noida for period of three years\\". Sl. No. DESCRIPTION Unit Qty Rate (₹) (Excl. GST) Amount (₹) Schedule-A |
| 13 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required a 200 mm. dia( wall thickness = 6.3 mm) Mtr 158.0 2096.51 331248.58 b 150 mm. dia. Mtr 235.0 1571.89 369394.15 |
| 14 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required a 25mm dia Mtr 320.0 311.6 99712.0 b 32 mm dia Mtr 135.0 348.65 47067.75 c 40 mm dia Mtr 45.0 430.68 19380.6 d 50 mm dia Mtr 104.0 520.65 54147.6 e 65 mm dia Mtr 25.0 664.21 16605.25 f 80 mm dia Mtr 272.0 742.28 201900.16 g 100 mm dia Mtr 97.0 991.69 96193.93 h 150 mm dia Mtr 63.0 1365.48 86025.24 i 200 mm dia Mtr 40.0 1935.75 77430.0 j 250 mm dia Mtr 15.0 2329.38 34940.7 |
| 15 | Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : a 25mm Mtr 16.0 367.17 5874.72 |
| 16 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : a 40 mm Nos 18.0 2321.44 41785.92 b 50 mm Nos 30.0 2428.62 72858.6 c 65 mm Nos 22.0 2744.84 60386.48 d 80 mm Nos 90.0 3203.31 288297.9 e 100 mm Nos 45.0 4269.76 192139.2 f 150 mm Nos 109.0 5754.98 627292.82 g 200 mm Nos 21.0 9895.73 207810.33 h 250 mm Nos 9.0 13339.19 120052.71 i 300 mm Nos 12.0 16137.62 193651.44 |
| 17 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : a 80 mm Nos 3.0 6978.88 20936.64 b 100 mm Nos 3.0 9545.1 28635.3 c 150 mm Nos 10.0 14918.35 149183.5 d 200 mm Nos 5.0 25889.13 129445.65 e 250 mm Nos 5.0 30642.5 153212.5 |
| 18 | Providing, fixing, testing & commissioning of installation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : a 80 mm Nos 2.0 28045.18 56090.36 b 100 mm Nos 2.0 29570.1 59140.2 c 150 mm Nos 2.0 31687.77 63375.54 |
| 19 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. a 80 mm Nos 5.0 3025.35 15126.75 b 100 mm Nos 17.0 4267.11 72540.87 c 150 mm Nos 15.0 7051.65 105774.75 d 200 mm Nos 18.0 14588.89 262600.02 |
| 20 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : a 40 mm Nos 8.0 3735.21 29881.68 b 65 mm Nos 17.0 4150.68 70561.56 c 80 mm Nos 39.0 4987.56 194514.84 d 100 mm Nos 26.0 7168.75 186387.5 e 150 mm Nos 62.0 11628.38 720959.56 f 200 mm Nos 16.0 19235.08 307761.28 |
| 21 | Providing and fixing of Air release valve of 25 mm dia IS:14845 ISI Marked |
| 22 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required |
| 23 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required a 100 mm Nos 8.0 4870.46 38963.68 b 150 mm Nos 28.0 5867.44 164288.32 |
| 24 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories a Pendent Sprinkler Nos 250.0 320.2 80050.0 |
| 25 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.A) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585B) 20 mm nominal internal dia gun metal globe valve & nozzleC) Drum and brackets for fixing the equipmets on wallD) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket a 30 m Each 153.0 5565.77 851562.81 |
| 26 | Supplying and fixing 63 mm dia, 15 m long RRLhose pipe with 63 mm dia male and femalecouplings duly bound with GI wire, rivets etc.conforming to IS 636 (type-A) as required : stainless steel (Grade 304) |
| 27 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel Set |
| 28 | Supplying and fixing of fire brigade connection of cast iron body with gunmetal male instantaneous inlet couplings completewith cap and chain as reqd. for suitable dia MS pipe connection conforming toIS904 as required : a 2 way-100 mm dia M.S. Pipe Nos 18.0 4382.07 78877.26 b 4 way - 150 mm dia M.S. Pipe Nos 16.0 9191.04 147056.64 |
| 29 | Supplying & fixing 63 mm dia gun metal shortbranch pipe with 20 mm nominal internal diametersize nozzle conforming to IS 903 suitable forinstantaneous connection to interconnect hose pipecoupling as required: Stainless Steel (Grade 304) |
| 30 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : a 15 mm to 40 mm nominal bore Mtr 65.0 82.1 5336.5 b Above 40 mm nominal bore Mtr 85.0 88.82 7549.7 |
| 31 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a 65 mm nominal bore Nos 28.0 986.2 27613.6 b 50 mm nominal bore Nos 30.0 581.02 17430.6 c 40 mm nominal bore Nos 27.0 467.93 12634.11 d 32 mm nominal bore Nos 30.0 390.26 11707.8 e 25 mm nominal bore Nos 32.0 352.19 11270.08 |
| 32 | Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : a 200 mm dia Nos 15.0 7748.71 116230.65 b 150 mm dia Nos 15.0 5553.37 83300.55 c 100 mm dia Nos 15.0 4391.19 65867.85 d 80 mm dia Nos 15.0 2736.08 41041.2 |
| 33 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required a In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works KG 1406.0 94.14 132360.84 |
| 34 | Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : a 200mm Mtr 20.0 2381.76 47635.2 b 250 mm Mtr 15.0 2943.83 44157.45 |
| 35 | Dismantling MS pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: a Up to 150 mm diameter Mtr 231.0 265.97 61439.07 b Above 150 mm dia up to 300 mm dia Mtr 161.0 349.85 56325.85 |
| 36 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a 200 mm Nos 13.0 7611.34 98947.42 b 150 mm Nos 13.0 5952.46 77381.98 |
| 37 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. a 65 mm Nos 2.0 12793.29 25586.58 |
| 38 | Providing and fixing of bellow pad (Pressure retainer) including cutting, screwing, welding, etc with forged steel welded butt fitting with flanges all respect nut, bolt, washer, gasket etc. Make Easy flexx/Resistolex. a 200 mm Nos 4.0 995.33 3981.32 b 150 mm Nos 8.0 6215.65 49725.2 c 100 mm Nos 6.0 843.1 5058.6 d 80 mm Nos 8.0 5075.98 40607.84 e 65mm Nos 6.0 683.07 4098.42 |
| 39 | Providing and fixing 150mm diameter , bourden type brass dial type pressure gauge calibrated for 0-15 Kg/Sqmm range with brass isolation valve & associated pipe accessories complete as per specifications |
| 40 | Providing and fixing of pressure gauge Siphon |
| 41 | Excavation as per general profiles and back filling for all kinds of soil and rebuilding/providing of RCC ,CC, bituminious road. |
| 42 | Providing, Fixing, Dismantaling & Removal of Pressure release valve |
| 43 | Providing and fixing of double flanged vertical air vessels fabricated from 100 mm MS plate with dished end from 10 mm MS plate are standard pressure tight MCNEIL type man hole painted inside with bit mastic or anticorrosive paint and outside with one coat of primer and two coat of synthetic enamel paint of approved shade complete with approved quality pressure switched pressure guage and all other required accessories to operate commonly main fire pump and jockey pump at drop of prssure automatically at required pressure setting Recommended dia - 450 mm. Height of cell - 2000 mm. Working pressure - 7 kg/sq. cm. Testing pressure - 25 Kg/sq. cm. |
| 44 | Providing and fixing of different size of ball valves: a 50 mm Nos 159.0 975.81 155153.79 b 32 mm Nos 121.0 768.94 93041.74 c 25 mm Nos 518.0 686.19 355446.42 |
| 45 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required a 80 mm Nos 31.0 1545.69 47916.39 b 32 mm Nos 4.0 1393.46 5573.84 |
| 46 | Providing and Fixing of Medium Velocity water spray nozzles, natural brass finish/Chrome plated for under plateform sprinkler system at UG station. |
| 47 | Providing and fixing of Motorised operated valve for water spray system. |
| 48 | Providing, Fixing, Dismantaling & Removal of Monitored Butterfly Valve (150 mm) with all necessary accessories like flanges, gasket, nut and bolt etc |
| 49 | Repairing of existing butterfly valves by replacment of neccesary parts such as spring, handles, spindle, rubber gasket, plate, disc etc of following dias/sizes a 200 mm Nos 21.0 1233.43 25902.03 b 150 mm Nos 33.0 1159.27 38255.91 c 100 mm Nos 21.0 1078.86 22656.06 d 80 mm Nos 76.0 874.33 66449.08 e 65 mm Nos 6.0 823.59 4941.54 |
| 50 | Repairing of existing Sluice valves by replacment of neccesary parts such as spring, handles, spindle, rubber gasket, plate, disc etc of following dias/sizes a 200 mm Nos 9.0 1951.63 17564.67 b 150 mm Nos 4.0 1600.33 6401.32 |
| 51 | Repairing of existing strainers by replacment of neccesary parts such as nuts, bolts, wire mesh, gasket, etc of following dias/sizes a 200 mm Nos 13.0 1951.63 25371.19 b 150 mm Nos 28.0 1600.33 44809.24 c 100 mm Nos 13.0 1444.2 18774.6 d 80 mm Nos 11.0 1309.93 14409.23 |
| 52 | Repair of existing control valve such as water motor alarm, bronze seat clapper, and clapper arm, gong bell, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of different size as required. a 150 mm Nos 18.0 4293.58 77284.44 b 100 mm Nos 10.0 3762.73 37627.3 c 80 mm Nos 17.0 2796.29 47536.93 |
| 53 | Reparing of existing fire hydrant cabinet doors, hydrant/connection boxes through welding, re-alignment of door frames, replacement of damaged wire mesh, hinges, with necessary adjustments etc. |
| 54 | Hydraulic testing (at 150% of working pressure) of heavy class-C, M.S. Pipe IS: 1239 of various dias pipe line. (200mm,150mm, 100mm, 80mm, 65mm, 50mm, 40mm, 32mm, 25mm) |
| 55 | Painting of fire pipe line [post office red color/shade no. 536 as per IS 5] |
| 56 | Marking of fire tank capacity, suction/delivery header, test line, air vessel, PRV, induction motor shall be done on appropriate location as clearly visible in pump room. |
| 57 | Fire tank level indicator in pump room. |
| 58 | Skilled - Providing welder/fitter for welding work along welding machine to carry out welding work in different Line stations and other ancillary building as per direction of enginer in charge including cost of consumable ( electrodes ) with all tools and equipments. |
| 59 | Unskilled - Providing labours/helpers/beldar with tools and plants as per direction of engineer in charge. |
| 60 | Providing and fixing of stainless steel shut off Nozzle 5mm dia bore (Orifice) confirming to IS: 8090 with serrated tail for 25 mm dia hose reel pipe with supply of necessary jubilee clip of requisite size. |
| 61 | Providing and fixing rubber/thermoplastic synthetic hose reel tube 25mm dia 45 mtr length confirming to IS: 444-1987/ 12585-1988 type-II on hose reel drum & duly ISI marked |
| 62 | Providing and fixing wall mounting swinging type hose reel drum ISI marked for housing 25mm dia, 45 Mtr length hose reel tube confirming to IS 884 |
| 63 | Providing and fixing of metal box for hydrant made up of 14 SWG MS sheet along with suitable cover/door arrangement. Drawing and dimensions of hose box shall be approved by Engineer in charge |
| 64 | Providing and fixing of fire hydrant cabinet doors. Drawing and dimensions of doors shall be approved by Engineer in charge |
| 65 | Providing and fixing of MS Blind plate of fire Hydrant valve for plug the hydrant point |
| 66 | Providing and fixing of industrial pressure switch with range of 0-10 bar and adjustable differential 0.6-6 bars |
| 67 | Providing and fixing of 25mm dia union assembly on threaded joints at required locations TOTAL of Schedule A (Without GST) 20932306.04 TOTAL of Schedule-A (Exclusive of GST@18%) 20932306.04 Add GST @18% 3767815.09 Total Schedule-A (including GST@18%) 24700121.13 Schedule- B (Any DSR Item other than Sch-A ) |
| 68 | Any other items DSR (Civil) 2023 (Vol-1 & Vol-2) and DSR E&M 2025.Any other required item will be considered from DSR E&M 2025 & in case of non-availability of any particular item in DSR E&M 2025, same will be considered from DSR Civil 2023 (Vol-1 & Vol-2) TOTAL of Schedule-B (Exclusive of GST @18%) 4237288.14 ADD GST @18% 762711.87 Total Of Schedule - B (Incuding of GST@18%) 5000000.01 Total Scedule A + Schedule B (Excluding GST) 25169594.18 Total Scedule A + Schedule B (Including GST) 29700121.14 |
