|
| 1 | Dismentling existing plaster including disposal of refuse as directed by the engineer in charge within a distance of 60 mtr |
| 2 | Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth |
| 3 | Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work. |
| 4 | M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work |
| 5 | 12 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work |
| 6 | Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. |
| 7 | Supply and stacking 53mm to 22.4mm size stone aggregate. |
| 8 | consolidtion of stone ballast by hand rammer i/c opening out stacks sorting kankar into three sizes,repairing patches in existing road surface with kankar making medhi to retain water and ramming and also i/c carriage of metal upto 30 mtr carriage of water 200 mtr supply and maintenance of barriers and all tools and plants required for proper completion of work ,kanker to be supplied to the contractor free at site but upto 10cm loose thick coat but excluding roller charge |
| 9 | Supplying & fixing 80 mm thick Precast colour cement concrete I shape inter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5 mm thickness having plan dimention 200x( 160+120mm) of op cement , smooth high gloss finish, skid resistant,manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than 40MPa and weight 4.5 kg per no. including cost of meterial, with blanket layer of 4.00cm thick fine sand including labour T& P etc required for proper completion of the work as directed by Engineer-in-charge. colour tile |
| 10 | Providing wall putty on new surface with approved qwality |
| 11 | Finishing wall with weather coat paint of approved make and quality on new work with two coat to give an even shade i/c supply of all material,labour,t and p etc required for proper completion of the work |
| 12 | paniting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. |
| 13 | Steel work welded in built up section/framed work i/c cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel steel etc as required in gratings,frames,guard bar,ladder,railings,bracket,gates,and similar work |
| 14 | Supply/ fixing of black granite stone sign board with cutting of given maters as per direction of engineer in charge in all complete Please Enable Macros to View BoQ information |
