|
| 1 | Providing and applying one coat of epoxy primer and two coat of Polyurethane waterproofing membrane on the terrace as per following method.a. clean the surface by wire brush grinder thoroughly.b. Apply the heavy duty tile cleaner to the surface and brush the surface and clean thoroughly by clean water.c. Wash the surface by the jet d. Fully glazed tiles chips must be abraded prior to the priming.Primer: 1. Prior to mixing, stir part A mechanically. 2.When all of part B has been added to part A, mix continuously for 3 minutes until a uniform mix has been achieved. Over mixing must be avoided to minimize air entrainment.3. Pour the mixed primer onto the prepared substrate and apply by brush, roller or squeegee then back roller in two direction at right angles to each other.4. Immediately broadcast quarts sand on wet primer and remove excess sand after primer is cured.Polyurethane waterproofing memberance: Apply first coat directly from container by rooler or brush. Apply second coat in same way as first coat preferably applied in cross direction to first coat.Product information: Sikalastic-10 Primer EP: Epoxy resin with special fillers with 20 KG pack, with Part A+B, Part A 15.8 Kg container, Part B 4.2 kg container, Colour: Part A+B mixed liquid, brownish-transparent, Part A liquid, brownish-transparent, Part B liquid, transparentWaterproof materials: Sikalastic 562 IN, Composition: Water based Polyurethane, viscous liquid. Packaging: 25 Kg container. Colour: White or GreyConsumption: Epoxy primer 400gm/Sqm and Polyurethane waterproofing memberance1.5-1.8kg/sqm.Work should be carried out as per manufacturer specification. The cost of work include required all materials, tools, plants, machines, Laboure cost etc., complete as per direction of Engineer in charge. |
| 2 | Providing and fixing of fabric PVC coated Fabric Canopy to the existing windows of SRF, Garware make of 580gsm both side pvc coated fabric , 100% waterproof fabric of approved quality and make, with MS framing of pipe having a size of 25X25mm, of 10 gauge thick and epoxy painting including primer, including cost of scaffolding, cost of required all materials, tools, plants, laboure charges etc., complete as per manufacturer specification and as per direction of Engineer in Charge |
| 3 | Fixed canopy of size 9.5’ X 3’ |
| 4 | Fixed canopy of size 17’3’X3’ |
| 5 | Fixed canopy of size 22’X3’ |
| 6 | Fixed canopy of size 12’X3’ |
| 7 | Fixed canopy of size 10’X3’ |
| 8 | Fixed canopy of size 15’X3’ |
| 9 | Extra for providing and fixing of aluminum Patti, filling of gap from silicon sealant and waterproofing work for fixing of canopy including cost of scaffolding, cost of required all materials, tools, plants, laboure charges etc., complete as per manufacturer specification and as per direction of Engineer in Charge |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 12 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 14 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work |
| 15 | Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift : All kinds of soil |
| 16 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. |
| 17 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 18 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 19 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 20 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 21 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. Please Enable Macros to View BoQ information |
