|
| 1 | FOR 3D PAINTING WORK |
| 2 | Decorative designer poles 4m Height |
| 3 | LED BULB 15WATT |
| 4 | Repairing of playing and gym equipment |
| 5 | Painting with deco paint of approved brand andmanufacurer |
| 6 | Provision for welcome gate i/c steel structure,acp work and embosssed letter work on acp sheet with light |
| 7 | Provision for bore well i/c casing,submersible pumpelectric cable etc |
| 8 | Dismantling stone slab flooring laid in cement mortar includingstacking of serviceable material and disposal of unserviceablematerial within 50 meters lead. |
| 9 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavatedearth including of all lift and lead upto 50m. Disposed earthto be levelled and neatly dressed All kinds of soil |
| 10 | Boring, Providing and installing cast in situ single under reamed pilesof specified diameter and length in M 20 cement concrete, excludingthe cost of steel reinforcement but including the cost of boring,cement concrete, all complete. (Length of pile for payment shall bemeasured upto to the bottom of pile cap) 300 mm dia piles |
| 11 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-10 (Nominal Mix) with 40mm maximum size of stone aggregate |
| 12 | Laying old cement concrete interlocking paver blocks |
| 13 | Providing and laying 60mm thick factory made cement concreteinterlockingpaver blockofM-30grade reflective type rubbermoduldedglossycolour pavingblockmadebyblockmakingmachinewithstrong vibratorycompactionandof approvedsizeandshape laid in requiredcolourandpatternoverandincluding50mmthickcompacte dbedofstone dust/sandfillingthejointswithsandetc.allcompleteasper thedirection |
| 14 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. completeMild steel and Medium Tensile steel bars. Thermo-Mechanically Treated bars. |
| 15 | Centering and shuttering including strutting, propping stretching etc.complete for and removal of form work by sheet plate or ply woodshuttering fo Foundations, footings, bases of columns, etc. For massconcrete. |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate |
| 18 | Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate |
| 19 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 50 (average compressive strength) insuperstructure above plinth level up to floor 2 level including the cost ofscaffolding Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 20 | 15 mm cement plaster on rough side of single or halfbrick wall of mix 1:4 (1 cement: 4 sand) |
| 21 | Construction of cement concrete mountable/ barrier type kerb / kerb withchannel in M 20 grade laid with kerb laying machine, all complete as perdesign approved by Engineer-in-Charge |
| 22 | ProvidingandLayingMexican/Zyosiacarpet grassTurf withearth50mmto60mmthicknessonexistinggroundpreparedwith properlevelandrammingwithtoolswooden(Durmuth)andthenro llingthesurfacewithlightrollermakethesurfacesmoothenandlight wateringwithsprinkler andmaintenance for 30daysormore till thegrassestablishes properly, as per direction of Engineer-in-Charge. |
| 23 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade: Two or morecoats on new work |
| 24 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brandor manufactu |
| 25 | Supplying of ISI Marked and accepted standard of Miniature CircuitBreaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898:2002 but without enclosures :- 6 Amp to 32 Amp Rating |
| 26 | Supplying and installing Double wall corrugated pipes (DWC) ofHDPE ( IS 14930 Part II -marked ) for cable laid under ground withnecessary connecting sockets/ couplings,tees of same materialand at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated materialwith ramming and making the surface good. 50.00mm outside dia |
| 27 | Supply of XLPE Insulated power cable (conforming IS- 7098) 1100 Volt grade/Heavy duty power cable conforming to IS1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor UNARMOURED 4 CORE 10 Sq.mm.(XLPE) |
| 28 | Supplyingofstreet lightwithhighpowerLEDof1to3Weachassembledon singleMCPCB, systemlumensoutput withefficacy>110 lm/W. luminiarehavingcolor temp6500K&50000burninghrs lifewithminimum@L70,Thecolour renderingindexofLEDlightshouldbemorethan70.Luminiar ecomprisesof driver, PF0.95&surgeprotection 4KV. Housingmadeof pressurediecastaluminiumwithheat resistant flatglass/Lens type, IP66 protection.SubmissionLM80-08FormLEDSourceManufacturer&LM79 150W |
| 29 | Supplyingof ISIMarkedandacceptedstandardofMiniatureCircuit Breaker(MCB)of 'C'seriessuitablefor 240/415Volts,50Cycle,10kAValue ACsupplyconfirming to IS: 8828 : 1996, IEC: 60898:2002 but without enclosures : FOUR POLE(FP) 6 Amp to 32 Amp Rating |
| 30 | Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required n gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works |
| 31 | Supply & installation of precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ±5% total coated thickness (TCT) thick Zinccoating 120gsm as per IS: 277 in 240mpa steel grade, 5- 7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum |
| 32 | Steel work in built up M.S. tubular section (round, square orrectangular Hollow tube etc.) trusses/frame work etc./ railing work etc.including cutting, hoisting fixing in position and applying a priming coatof approved steel primer, welded and bolted including special shapedwashers etc. complete. Hot finished welded type tubes |
| 33 | Supplying of flood light with high power LED of 1 to3 W each assembled onsingle MCPCB, system lumens output with efficacy>110 lm/W. luminiarehaving color temp 6500K & 50000 burning hrs life with minimum @ L 70,The colour rendering index of LED light should be more than 70. Luminiarecomprises of driver, PF 0.95 & surge protection 4 KV.Housing made ofpressure die castaluminium with heat resistant flat glass, IP66protection.Submission LM 80-08 Form LED Source Manufacturer & LM79-08/ IS16106 from NABL approved lab. Manufacturermanadatory i/c 150W Item- 22 Please Enable Macros to View BoQ information |
