|
| 1 | Supplying and erection of H-Beam 152x152mm 37.1 Kg./mtr. un jointed steel support for 33/11 KV line as per IS standard & approved make including welding, Jointing With M.S. Nut Bolts, drilling of holes, etc. complete as required with concreting Of Foundation in 1:3:6 (1 cement: 3 Coarse sand: 6 graded stone aggregate 40mm nominal size) excavation in all soil & refilling of pit other than c.c. by boulders & excavated soil with ramming & watering, with foundation Size 0.6Mx0.6Mx1/8th M depth of length of pole with base padding from stone block/precast block of size (450x450x75 mm) Earth coil 4.0mm G.I. Wire 50mm dia 115 turns & 2.5 mtr. Lead, muffing etc. as required. H-Beam 152x152mm 37.1 Kg./mtr., 11 Mtr. Long= 408.1kg |
| 2 | H-Beam Clamps 65x8mm Flat |
| 3 | H-Beam Back Clamps 65x8mm Flat |
| 4 | Supplying & erection of Stay set with G.I. Stay wire 7/4.0 mm dia, with Stay set wire 20 mm dia (Painted) in cement concrete 1:3:6 foundation 0.3 cmt. Per stay for 20/25 mm dia stay wire including excavation in all soil & refilling of pit, ramming & watering etc. as required.11 Kv Stay Set |
| 5 | Supplying and fixing of I.S. & approved make M.S. Angle/Channel/Flat Iron fabricated fittings i.e. bracket/cross arm/clamps etc. on existing support for overhead line/bus bar/equipments including nuts & bolts, back clamp required holes, welding & other necessary work & materials required as per specification & as required for the followings.(a) 11 KV V Cross Arm of M.S. Angle 65x65x6mm |
| 6 | (b) 11 KV Horizontal And Cross bracing set 65x65x6mm angle of 8’(2.4M) center D.P. |
| 7 | (c) 11 KV Top Clamp 65x65x6 mm Angle Type. |
| 8 | (d) M S Strain plate 65x8 mm 250 mm long |
| 9 | (e) D.C. Cross arm of M.S. Channel 100x50x6mm (8' Centre to centre) |
| 10 | Supplying and fixing following glazed Polymer/porcelain insulators of approved make on existing pole bracket/cross arm with necessary material as required.(A) 11000 Volts composite Polymer disc insulator with strain hardware of appropriate size of conductor. |
| 11 | (B) Polymer 11 KV Pin Insulator. |
| 12 | Supplying & fixing 11000 volt danger notice plate of 250x200mm & at least 2mm thick made of mild steel and vitreous enameled white on both side & inscription in signal with red colour on front side with clamp ,alluminium wire and Tape etc. as required on existing poles. |
| 13 | Painting of steel pole With all support structure etc. with providing of necessary required material and labour for prime coat over new steel & other metallic surface by Red Oxide zinc chromide paint and than after two coat of aluminum paint brushing of approved standard make complete including preparation of surface etc. as required.(a) Pole with cross arm |
| 14 | (b) Extra For DP/TP/FP 33/11 Kv line |
| 15 | Supply And Laying 11kv AL 59 ACS Covered Conductor 78.82sqmm Along With MVCC Accessories As Per EN: 50397 Calculated for 1KM Single Phase Feeder, Tension/ Dead/ Anchoring Clamps With Piercing Connector Suitable for MVCC, IPC for CC to CC Connection,EN-50397-P-2 required sag (Approx. 3%)11 kv ACS Covered Conductor |
| 16 | 11 Kv Single pole cut point fitting 100x50x6 mm Channel |
| 17 | Straight through heat shrinkable cable jointing kit with lugs for 11 KV GradebXlpe Cable for 3 core 70 Sqmm Latest Applicable IS:13573/2011/Part-II With Latest Amendments. |
| 18 | Outdoor heat shrinkable cable jointing kit with lugs for 11 KV GradebXlpe Cable for 3 core 70 Sqmm Latest Applicable IS:13573/2011/Part-II With Latest Amendments. |
| 19 | 11 KV Strain Hardware (T&c type) fittings |
| 20 | Earthing Coil of 115 Turns of 50 MM Dia.And 2.5 Mtr Lead of 4.0 MM G.I. Wire |
| 21 | MS Nuts With Bolts. Please Enable Macros to View BoQ information |
