|
| 1 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five killograme) per sqm on prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 or as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government. |
| 2 | Providing, laying and rolling of close-graded premix /surfacing material of 20mm (Twenty milimetres) thickness composed of 11.2mm to 0.9mm (eleven point two millimeters to zero point nine milimetres)type-A or 13.2mm to 0.9 (Thirteen point two millimeter to zero point nine millimeter) type-B aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100(Eighty-Hundred) kN static roller capacity, finished to required level and grades and as per technical specification Clause-509 as per the direction of Engineer-in-charge including carriage of material within all leads , lifts and other incidental. The rate including of Octroi, toll tax , GST Sales tax GST or any other taxes imposed by the Government. |
| 3 | Providing, spreading and compacting 75 mm (Seventy five millimeter ) thick stone aggregate size 53mm to 22.4 mm (fifty three millimetre to twenty two point four millimetre) Grading-III , 75mm (seventy five millimetre) consolidated thick to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 KN static roller to proper grade and camber, applying and brooming stone screening such as moorum or gravel at the rate of 0.23 (zero point two three cubic metre) per ten square metre to fill up the interstices of course aggregate, watering and compating to the required density as per MORD technical specifications clause No. 405 an including carriage of materials within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 4 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock, hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification clause 305.1 and as per the directions of the Engineer-in-Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150 mm (one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including octroi royality Malkhana Tolll tax sale tax , GST or other taxes imposed by the Govenment. |
| 5 | Providing and Laying plain cement concrete 1:5:10 (one cement isto five sand isto ten graded) crushed stone aggregate 40 mm (forty millimetre) nominal size mechanically mixed and vibrated in foundation for all type structure complete for all hights / depth including curing and cost of form work complete in all respect as per the drawing and technical specifications clause 802, 803, 1202 and 1203 and as per direction of Engineer-in-Charge. The rate including the octroi, royalty, Malkana, Tolll tax, sales tax , GST or any other taxes imposed by the Government. |
| 6 | Back filling with granular material behind abutments, return walls, wing walls and retaining walls complete as per drawings and MORD technical specification clause 1204.3.8 and as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including the octroi, royalty, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government. |
| 7 | Providing Weepholes in brick masonary / stone masonary / plain / re-inforced concrete abutment, wing wall, return wall, retaining walls with 100 mm (one hundred millimetre) dia Metres, PVC pipe Finolex/Vigor/Ashirvad/Astral etc exetnding through the full width of the structures with a slope of 1 (one) vertical : 20 (twenty) horizental towards drawing face complete as per drawing and tecnical specification clause 614, 709, 1204.3.7 and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rates are inclusive of the octori, royality, Malkana, Tolll tax, sale tax GST or other taxes imposed by the Government. |
| 8 | Providing and laying of boulder apron laid in wire crates with 4 mm (four milimetre) dia G.I wire conforming to IS: 280 and IS: 4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10% (ten percent) extra for laps and joints laid with stone boulders weighting not less than 40 Kg (forty kilograme) each as per drawing technical specifications Clause 1301 and as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including the octroi, royalty, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
