|
| 1 | Engagement of labourers for clearance of site etc. |
| 2 | Dismantling steel work manually/by mechanical means in built upsections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge:.Note:-The cost of dismantled material (scrap) shall be deducted in the bill) |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar Note:-The cost of dismantled material shall be deducted in the bill) |
| 4 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar Note:-The cost of dismantled material shall be deducted in the bill) |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (1 meter from cutting edge ) All kinds of soil |
| 6 | Providing and laying stone soling/ hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job . |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete job including all carriages complete job.(TMT Bars) |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structrure including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 13 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 14 | Form work centering / shuttering including Strutting, Propping etc and removal of form work for:(a) Foudation, footings, basis, coloums etc |
| 15 | B) Walls any thickness ) Including attached plasters, buttresses, Plinth and String Course etc. |
| 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. |
| 17 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job.(a) (Welded.) |
| 18 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work |
| 19 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 20 | Providing Fixing of 3 seater ornamental benches of specified design and specifications made of cast iron legs / arm rests. The seat and back rest made up of mild steel hollow rectangular tubes of required size and thickness fixed with legs/ arm rests with the help of nuts and bolts of required size and dia including fixing the bench in 1:2:4 cement concrete blocks including all earth work, soling, priming and painting of requried shade and all carriages and fixing charges complete job as per directions of Engineer In Charge. |
| 21 | Providing and Fixing of Pole Mount Stain less Steel Ornamental Garden single Dust Bins 50 Ltr Capacity with stand of approved make and design including all carriages and fixing charges complete. Cost shall include anchoring of base in concrete foundation (1:2:4), complete job.as per the directions of the engineer incharge |
| 22 | Carriage of materials by mechanical transport from source upto the site of work complete job .A) Stone agg 40mm from 22 kms av .lead |
| 23 | B) Stone agg 20mm from 22 kms av .lead |
| 24 | C) Sand from Ganderbal 15 kms av .lead |
| 25 | Bricks from 20 km Please Enable Macros to View BoQ information |
