|
| 1 | Dismantling existing plaster includingdisposal of refuse as directed by theEngineer-in-charge within a distance of 60metre (200 feet). |
| 2 | Dismantling W C pan of all sizes including disposal of material as per direction of Engineer - in - charge. DSR 2023 ITEM N. 14.82 |
| 3 | Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in- charge within a distance of 60 meter (200 feet).PWD SOR 2022 17.2.2 |
| 4 | First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etc all completed as per the direction of engineer - in - charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a) |
| 5 | Dismantling Tile work floor & roof including disposal of material as per direction of Engineer - in - charge. DSR 2023 ITEM N. 15.23.1 |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.etc all complete as per direction of engineer in-charge. AS PER PWD SOR 2022 SI NO-14.26 a |
| 7 | Desposal of refused material/malwa distance up to 8 km etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2020 /231( a). |
| 8 | 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. |
| 9 | Providing wall putty on old surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats.AS PER PWD SOR 2022 662 NEW ITEM . |
| 10 | Distempering (first coat) with oil bound distemperof approved brand and manufacture and ofrequired shade on undecorated wall surface togive an even shade over and including a primingcoat with cement primer of approved brand andmanufacture such as Berger, J&N, Shalimar,Asian Paint after thoroughly brushing the surfacefree from mortar dropping and other foreignmatters and also sand papered smooth includingsupply of all materials, labour, Tools & plants etc.required for proper completion of the work.ITEM NO 649+650 |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : SOR 2022 15.04 |
| 12 | Supply and fixing 6 mm. (¼\\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants.etc all complete as per direction of engineer in-charge. AS PER PWD SOR 2022 SI N0-14.17 |
| 13 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore DSR 2023 ITEM .N 18.51.1 |
| 14 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore DSR 2023 ITEM .N 18.49.1 |
| 15 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore DSR 2023 ITEM N. 18.53.1 |
| 16 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. Each DSR 2023 ITEM N.18.53A |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directionof Engineer in Charge. Concealed work, including cutting chases and making good the walls 20 mm nominal dia Pipes DSR 2023 ITEM N. 18.8.2 |
| 18 | Providing and fixing pvc connection with ptmt nut colar bush 15 mm nominal bore etc all complete as per direction of engineer in-charge.dsr 2023 18.21.1.1 |
| 19 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length DSR 2023 ITEM N. 18.74.1 |
| 20 | Supply and fixing 30 mm. thick W P C door shutters etc all complete as per direction of engineer in charge. |
| 21 | Providing and fixing white vitreous china squatting plate urinal with integrilrim longitudinal flush pipe DSR 2023 17.34 |
| 22 | Providing and fixing exhaust fan etc all complete as per direction of engineer en-charge. LMR |
| 23 | P/F URINAL PARTISION BOARD ETC ALL COMPLETE AS PER DIRECTION OF ENGINEER IN CHARGE .LMR |
| 24 | Providing and fixing wash basin with C.I brackets 15 mm(550 X 400 mm) C.P brass pillar taps, including painting of fittings and brackets, cutting and making good the walls wherever required. DSR 17.7.3/2023 |
| 25 | Providing and fixing white viterous china pedestal type water closet (European type) water closet with seat and lid 10 liter low level white viterious china flushing cistern & C.P flush bend with fittings and C.I brackets 40 mm flush bend overflow arrangement with special of standard make and mosquito proof coupling of approved muncipal design complete including painting of fittings and brackets cutting and making good the walls and floor wherever required. DSR 17.3.1/2023 |
| 26 | PROVIDING & FIXING CP SS JET WITH FLEXIBLE PIPE 1 M LENGTH ETC ALL COMPLETE AS PER DIRECTION OF ENGINEER INCHARGE. |
| 27 | PROVIDING & FIXING MIRROR SUPERIOR GLASS ETC ALL COMPLETE AS PER DIRECTION OF ENGINEER INCHARGE. |
| 28 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21. |
| 29 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 2023 17.1.1 |
| 30 | S/L P:C:C (1:6:12) with 40 mm gauge brick ballastfine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.{ AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273 } |
| 31 | S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 ( a). |
| 32 | Supply and fixing Galvanized corrugated ironroofing in position including supply of allmaterials, labour, Tools &plants etc. requiredfor proper completion of the work andincluding wastage.1.00 MM THICK |
| 33 | Wiring point for Light /fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable. etc complete in all respect. |
| 34 | Supply and wiring of submain but in 20mm dia heavy duty (2mm thick) PVC conduit with one number 4 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit. complete in all respect. |
| 35 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. |
| 36 | Supply and fixing following modular switch /socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. |
| 37 | S&F of 6 Amp. to 32 Amp. DP MCB C Curve CAT B |
| 38 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. |
| 39 | Supply and fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting including tube on Surface complete in all respect. |
| 40 | Supply and fixing of exhaust fan 250 mm incluidng all material,tools & plant etc. |
| 41 | GST Please Enable Macros to View BoQ information |
