|
| 1 | PART-A: Construction of R.O. ShadeExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansPWD SSR 2021-22 Item No. 21.02 |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means PWD SSR 2021-22 Item No. 21.06 |
| 3 | Filling in plinth and floors with with contractors material / brought from outside and approved by Engineer incharge in layers 15 cm to 20cm. including watering and compacting etc. complete. PWD SSR 2021-22 Item No. 21.37 |
| 4 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15cm to 20 cm thick including hand packing and compacting etc.complete. PWD SSR 2021-22 Item No. 21.38 |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation & bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand VSI Grade finely washed etc) PWD SSR 2021-22 Item No. 24.01 |
| 6 | Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually,striking joints,raking out joints and watering etc complete PWD SSR 2021-22 Item No. 27.03 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PWD SSR 2021-22 Item No. 24.10 |
| 8 | Providing internal cement plaster 6 mm thick in a single coating cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc.complete PWD SSR 2021-22 Item No. 32.01 |
| 9 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anticapillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) PWD SSR 2021-22 Item No. 38.34 |
| 10 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. PWD SSR 2021-22 Item No. 23.01 |
| 11 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) PWD SSR 2021-22 Item No. 39.24 |
| 12 | Providing and fixing steel window C.R.C. sheet as per I.S. 1513:1986 gauge sect. 65x40x25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15mm wide and15 mm deep at a distance of 45 mm.The first and lastrib should be 60mm away from vertical edge of the shutter. the shutter shall be welded,with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories PWD SSR 2021-22 Item No. 39.21 |
| 13 | PART B : Installation of R.O. UnitProviding and errecting HDPE rotational moulded Raw Water storge Tank of 2000 litre capacity Plasto/Syntex / Sarita |
| 14 | RWP Suction and Discharge Ball Valve |
| 15 | Raw Water Pump, 2.0 m3/hr single phase 1.5 HP Kirloskar / IPP |
| 16 | RWP Discharge Pressure Guage, Black |
| 17 | RWT & PWT Level Switch |
| 18 | DMF, 13 x 54 FRP Vessel Avenchura / HT/ Pentane |
| 19 | Media - Sand + Support Bed 13 x 54 |
| 20 | ACF, 13 x 54 FRP Vessel Painter /Ht/ Pentane |
| 21 | Media - Support Bed + Carbon 13 x 54 |
| 22 | 25 NB Auto MPV and Internals for the above Vessel initative / UKL |
| 23 | PH Booster Dosing Pump, 0-6 lph Verito / I-dose /E-dose |
| 24 | Antiscalant Dosing Pump, 0-6 lph Verito/I-dose/E-dose |
| 25 | 30 Ltrs. Dosing Tank (HDPE) |
| 26 | PH Boost Chemical |
| 27 | Antiscalant Chemical |
| 28 | CF, 20\\" spun cartidge housing PP |
| 29 | CF, 20\\" with PP spun cartidge (Jambo) Darilly / Intact / Gopani |
| 30 | HPP discharge Ball valve |
| 31 | High pressure Pump, 1.5 m3/ hr. single phase 2 HP IPP/ CRI /ALGO / CNP |
| 32 | Pressure Vessel suitable for 1 Nos. 4\\" membrane, in SS304 |
| 33 | 4\\" x 40\\" Membrane Burton /Pentane / Toray |
| 34 | Low and High Pressure Switch |
| 35 | Rej Flushing Solenoid Valve |
| 36 | Rotameter, RO Permeate, Reject & Recirculation Astrol / Flux |
| 37 | Permeate Storage Tank, 1000 Ltrs., Capacity SS |
| 38 | 1000 LPH UV Alfa/ Philips / Sukrut |
| 39 | Skid 202 SS & Wet Panel, MS Powder coating |
| 40 | Contral Panel, 1-1 |
| 41 | HPP Disch & Rej. Pressure Gauge |
| 42 | UPVC & Fittings |
| 43 | Hardware, Accessories, Wiring & Cable Accessories |
| 44 | Installation Errection and Commissioning Job work |
| 45 | Water Chiller Spilit type 2 ton |
| 46 | Water ATM Coin / Smart Card Base With Battery Backup |
| 47 | Supplying and erecting fully automatic line voltage stabilizer, buck and boost type for operation on input voltage 160 to 270V and out put voltage 200 to 250 rated fpr. 5 KVA maximum load and with voltmeter, selector witch, 6A / 16A flush type 3 pin socket for output and with 3 core flexible cord and 3 Pin 6/16A plug top suitable for Air conditioner of 2.0 TR / R.O. Plant of 500 LPH Capacity etc. Please Enable Macros to View BoQ information |
