|
| 1 | Providing and fixing of Thermal overload relay compaitble with contractor block complete in all respect of approved make to the entire satisfaction of EIC The rate quoted should include site visit, detection of fault, and replacement with testing |
| 2 | 45-75 amp |
| 3 | 14-23 amp |
| 4 | Providing and fixing of timer for Star delta operation including maing connection testing complete in all respect of approved make to entire satisfaction of EIC |
| 5 | Dressing of internal HT/LT internal/with 1.5control pannel wire with thimbling and PVC tie i/c cleanign of complete panel from inside with nut bolt, thimbles, tightening of bus bar, bolts, earthing wire connections and testing of pumps./motor to the entire satisfaction of EIC. |
| 6 | Providing and fixing of single phase preventor including making connection and testing complete in all respect complete in all respect to the entire satisfaction of EIC Make: Minilec |
| 7 | Providing and fixing of Indicator lamp as per site requirement complete in all resepct Make L&T |
| 8 | Providing and fixing of various size of aluminum thimble complete in all respoet as per site requirement fitting clamping withing entire satisfaction of EIC. |
| 9 | 25 Sq.mm bolt type |
| 10 | 35 Sq.mm bolt type |
| 11 | Rewinding of sub motor including repair/ replacement of various parts such as housing bush, rotor sleeve, sand graud, flange lock, thrust bearing, thurst plate, motor bush, seal bush, connection piece and repair of sub pump including repair/ replacement of various parts such as bowl bush, pump shaft complete in all respect i/c credit of old material . |
| 12 | 35 HP to 55 HP ( 45 HP ) |
| 13 | Lowering & lifting of sub pump complete in all respecst from tubewell. |
| 14 | Repair and rewinding of various AHU motor complete with lifting from AHU and refixing on site. |
| 15 | 7.5 Hp |
| 16 | 10 Hp |
| 17 | 15 Hp |
| 18 | Providing and fixing of 3 pole power contractor block complete in all respect for 3 phase current rating as below including making connections of Make L&T series MNX or equivalent make/ model of other approved make to the entire satisfaction of EIC. The rate quoted should include the site visit, detection of fault and replacement with testing |
| 19 | MNX 25 |
| 20 | MNX 32 |
| 21 | MNX 40 |
| 22 | MNX 70 |
| 23 | Providing and fixing of 3 pole MCCB with Thermal Magentic Releas and adjustable overload seting complete with making connection of approved make to the entire satisfaction EIC |
| 24 | 100 to 125 amp |
| 25 | 200- 250 amp 36 KA |
| 26 | Providing and fixing of hot water generator controller AC plant chiller unit. Water line outlet/inlet Temperature controller suitable make complete in all respect. |
| 27 | Providing and fixing of Hot water generator chiller water line Inlet outlet sensor |
| 28 | Servicing of Hot water generator electrical panel replace the reflecting material wiring detection of fault by visiting site and making connection control & power wiring in all respect |
| 29 | Repair, rewinding & overhauling of 40 HP to 55 HP induction motor 3 phase including replacement of defective parts including wiring of suitable size F class insulation paper glass, tap holder, Climber Mica sheet epoxy Shade brazing complete as per site requirement, 2 nos. ball bearing for both side including dynamic balancing of rotors, labour charges for opening of electrical motor and refitting at site including alingment of the motor with pump and labour charges for carriage of motor to the entire satisfaction of EIC. including credit of old material is taken while taken the quotation from the supplier. |
| 30 | Repair, & overhauling of 40 HP to 55 HP induction Pump 3 phase including replacement of defective parts including impeller, water seal, bearing, lath work, nut bolt washer, labour fixing of pump, balancing of motor pump and fixing of the site including alingment of the motor with pump and labour charges for carriage of pump to the entire satisfaction of EIC. Please Enable Macros to View BoQ information |
