Tender For E-Tender For Centrifugal Re-Babbiting Of Thrust Cum Guide Bearing Of Unit No.Ii And Centrifugal Re-Babbiting Of 20 Nos Thrust Pads Of Thrust Cum Guide Bearing With Testing Fixing And Commissioning Of 2X1.50 Mw Gumma Power House .
Tender Overview
Project Description
Tender for E-Tender For Centrifugal Re-Babbiting Of Thrust Cum Guide Bearing Of Unit No.Ii And Centrifugal Re-Babbiting Of 20 Nos Thrust Pads Of Thrust Cum Guide Bearing With Testing Fixing And Commissioning Of 2X1.50 Mw Gumma Power House .
BOQ
| Sl. No. | Item Description |
| 1 | O&M of Gumma Power House |
| 2 | Centrifugal re-babbiting of thrust cum Gudie bearing with white meatalConfirming to IS25 Grade 84 consists of following specification of works:-a) To clean bearing housing b) To record dimension and to note detail of oil packets and galleries.c) To remove oil fatigued and damaged metal layer under controlled temperature to avoid distortion of base metal .d) To carry out proper cleaning of base metal follower by DPT to ensure defect free surface.e) Tinning of base metal with required flux and graded tin.f) To reline with IS25 grade -84white metal for required thickness 10 to 12 mm.g) To carry out to machining of lining.h) UT Test to be carry out to ensure proper bonding.i) Thickness of white metal should not be less than 3.5 mm j) Final matching and finishing to maintain size ID 160 mm k) Certificate regarding material chemistry and ultrasonic test to provide by the contractor |
| 3 | Centrifugal Re-babbiting of 20 nos thrust pads of thrust cum Guide bearing of 2x1.50 MW Gumma Power House .The Job will consist of following works as detailed below:(1) removal of old damaged babbit material from the shella) To clean bearing housing b) To record dimension and to note detail of oil packets and galleries.c) To remove oil fatigued and damaged metal layer under controlled temperature to avoid distortion of base metal .d) To carry out proper cleaning of base metal follower by DPT to ensure defect free surface.e) Tinning of base metal with required flux and graded tin.f) To reline with IS25 grade -84white metal for required thickness 3 to 5 mm.g) To carry out to machining of lining.h) UT Test to be carry out to ensure proper bonding.i) Thickness of white metal should not be less than 3.5 mm j) Certificate regarding material chemistry and ultrasonic test to provide by the contractor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender