|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE WELLINGTON NAME OF WORK: SPECIAL REPAIRS TO DOORS, WINDOWS AND CONNECTED JOINERY IN AKBAR BLOCK BLDG NO. 188 UNDER GE DSSC WELINGTON Contract No: CWE/ WEL/ OF 2025-26 Bidder Name : PRICE SCHEDULE (BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc.Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category Total amount TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 3 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 5 | Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 8 | Taking down wall panelling and similar works complete all as specified and directed. |
| 9 | Dismantling boarding, any description, fixed in any position with screws etc complete all as specified and directed. |
| 10 | Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge. |
| 11 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 12 | S & F factory made UPVC ventilator, fixed type of approved colour with glazing all as per manufactuer's instructions and with following sections:(i) UPVC ventilator frame shall be made of UPVC materials confirming to IS-10151. The ventilator frame shall be made of extruded UPVC section having overall dimension 60mmx60mm and having wall thickness 2mm (+/- 0.10mm).(ii) The corners of wall frame shall be jointed by MS galvanised brackets joints mitred and plastic welded.(iii) The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm (+/-0.10mm) and tie rod shall be provided at the bottom of the frame(iv) Provn for exhaust fan shall be catered in the frame.(v) Glazing shall be provided with 5mm thick frosted glass fixed with appropriate size of beading as per the manufacture's instructions.(Note: (i) The entire fixing shall be done as per the manufactuer's instructions and specifications and as directed by the Engr-inCharge). (ii) The unit rate quoted shall be included the cost of glas/wire netting and all other cennected acessories. (iii) Net opening will be measured for payment purpose) |
| 13 | Providing and fixing factory made uPVC door with shuitter with the following constructional profiles:(i) Door frame over all sectional size 60mmx58mm with wall thickness 2.7 (+/-) 0.2mm of extruded section(ii) The corners shall be plastic welded(iii) The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2mm (+/-) 0.2mm(iv) The door shall be fixed to walls using 8mm dia, 80mm long MS scrrews minimum 03 Nos on each side(v) The glazing shall be provided with 5mm thick sheet glass fixed to door frame with UPVC standard beading of sectional size 24.05x16mm & 2mm thick.(vi) The bottom portion of door shutter shall be provided with UPVC board of 5mm thick and 1.0m in height fixed with EPDM rubber gasket and the balance portion shall be provided with glazing excluding the shutter fram area.(vii) The shutter shall be fixed to frame with using 03 Nos of 3D hinge of suitable size, one multi point mortice lock with powder coated handle of suitable size alongwith atleast two numbers of keys and two numbers powder coated MS tower bolts of suitable size(Note: The door shall be provided complete all as per the manufacturer's instruction and as specifed and directed. The unit quoted rate shall deemed to be included the cost of sheet glass and PVC board and all other accessories) |
| 14 | S & F UPVC partition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made of 60mmx60mm casement frame including necessary drilling, jointing and fill the gap with necessary solvent and fixing with all required cleats, brackets, channels etc complete all as specified and directed by the Engr-in-Charge. (Note: The partition shall be disgned acording to the approval of GE and cost shall deemed to be included the cost of glass/PVC panelling as per the design) |
| 15 | S & F factory made UPVC fixed window having UPVC profile sections of size 62mmx60mm having outer wall thickness of 2.00mm (+/- 0.30mm), all profile of the frame shall be reinforced with galvanised mild steel section of 1.2mm (+/-0.3mm) wall thickness at wherever required. All the corners and joints of the frame shall be mitred and cut and fusion welded without any mechanical joints. All welded joints are to be neatly trimmed and features grooved/ raised nib finish so as to make the finished products free from all sharp edges and burrs. Glazing shall be provided with 5mm thick plain sheet glass as per requirement and fixed with suitable UPVC beading of size 34mm x 18mm. The profile should be cut to length and welded at 45 degrees. The complete window shall be fixed into the pre-finished openings by drilling and fixing through the outer frame using high quality fasteners and silicon sealant shall be applied to fill up the gap between the wall anbd window frame for leak proof installation and completion complete all as manufacturer's instructions, specifed and directed. (Note: (i) The entire fixing shall be done as per the manufactuer's instructions and specifications and as directed by the Engr-inCharge). (ii) The unit rate quoted shall be included the cost of glass and all other cennected acessories. (iii) Net opening will be measured for payment purpose) |
| 16 | S & F factory made UPVC white colour two track two panels sliding window upto 1.5m height made of (big series) frame 67x50mm & sash 46x62mm both having wall thickness of 2.3mm +/- 0.2mm and single glazing bead/double glazing bead of appropriate dimension comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.6mm (+/- 0.2mm) thick galvanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), GI fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over bracket rod of required size and of approved quality complete all as specified and directed by the Engr-in-Charge. Glazing shall be provided with 4.8mm thick plain/frosted glass fixed with appropriate size of beading as per the manufacturer's specifications. (Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimensions in higher side shall be acceptable but no extra payment on this account shall be made) |
| 17 | S & F factory made UPVC white colour three track three panels sliding window with fly proof stainless steel wire mesh (two nos glazed and one no wire mesh panel) upto 1.5m height made of (big series) frame 116x45mm & sash 46x82mm both having wall thickness of 2.3mm +/- 0.2mm and single glazing bead/double glazing bead of appropriate dimension (Area of door above 5.00 Sqm) comprising of UPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.6mm (+/- 0.2mm) thick galvanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks and UPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) touch lock with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40Kg), GI fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over bracket rod of required size and of approved quality complete all as specified and directed by the Engr-in-Charge. Glazing shall be provided with 5mm thickplain/ frosted glass fixed with appropriate size of beading as per the manufacturer's specifications. Stainless steel wire mesh 0.36mm nominal dia and average width of aperture 1.4mm shall be provided with each window shutter complete all as specifed and directed. (Note: (i) For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimensions in higher side shall be acceptable but no extra payment on this account shall be made) |
| 18 | S & F vanetian blind of approved make, roller type, zebra pattern using polyester/PVC/vinyle of approved colour/shade and pattern including operating arragements such as chord/thread, counter weight, connecting chain etc and necessary fittings complete all as specified and directed. |
| 19 | S & F PVC sheet wall panelling of thickness 5mm (+/- 0.25mm) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (+/-0.25mm) thick, pre-lam PVC sheet. The panels and strips shall be of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company. The strips should have a grove of 65mm width and 1mm depth at their center for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove on the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly, the grid may very depending on the size of the wall. Optionally a strips of 5mm (+/- 0.25mm) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvant cement complete all as per manufacturer's instruction and as specified and directed by the Engr-in-Charge. |
| 20 | S & F PVC false ceiling consisting of 600mm x 600mm x 5mm (+/- 0.25mm) thick, pre-laminated plain PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in and including a frame work made of using standard GI frame work with GI furring channels of 16 gauge, main 'U' shaped channelss @ 1220mm c/c and inter connected cross channels 'C' shaped spaced at 610mm c/c, the main furring channels shall be fixed through GI channels suspenders from there @ 1200mm c/c, main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions and providing two coats of plastic emulsion paint over a coat of primer after preparation of surfaces complete all as per manufacturer's instructions and as specified and directed. |
| 21 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed. |
| 22 | M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 23 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 24 | M & L for rendering 5mm thick in cement mortar 1:4, mixed with integral water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement over 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 25 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 26 | M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer and over 1mm thick of wall care putty to a smooth surface complete all as specified and directed. |
| 27 | M & L for preparation new external surfaces of wall etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of alkali resistant primer and over 1mm thick wall care putty to a smooth surface complete all as specified and directed. |
| 28 | Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall and preparation of new surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 1mm thick wall care putty to a smooth surface complete all as specified and directed. |
| 29 | M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 30 | M & L for preparation old decorated external surfaces of wall etcafter complete removing old paints without disturbing the plastered surfaces and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer's instruction complete all as specified and directed. |
| 31 | M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar 1:3 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & cutting, polishing complete all as specified and directed. |
| 32 | M & L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of flooring, etc finished even and fair complete all as specified and directed. |
| 33 | M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough to receive the floor finish complete all as specified and directed. |
| 34 | M & L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed. |
| 35 | M & L for granite stone slab (of any type) as in vertical surfaces such as skirting/dado etc, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick screed bed in cement mortor 1:4 & cutting, polishing complete all as specified and directed. |
| 36 | M & L for Vitrified, designed, light shade coloured (light shade), tiles, 8 to 10 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc and set & jointed in neat cement slurry including 20 mm thick screed bed in cement mortor 1:4 complete all as specified and directed. |
| 37 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, and set & jointed in neat cement slurry including 20 mm thick screed bed in cement mortor 1:4 complete all as specified and directed. |
| 38 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, and set & jointed in neat cement slurry and including 10 mm thick bedding in cement mortor 1:3 complete all as specified and directed. |
| 39 | S & F 18mm thick High density High Moisture Resistant (HDHMR/HDWR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc including dismantling of existing board of any type complete all as specified and directed. (Note: All exposed edges/surfaces to be finished with same laminated sheet to match with other surfaces and mothing will be paid extra on this account) |
| 40 | S & F stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 16mm thick shutters complete all as specified and directed. |
| 41 | S & F Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. |
| 42 | S & F Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. |
| 43 | S & F 65mm size, 2 lever, brass Locks for cupboard, silver painted finish with two keys and key hole cover fixed with screws complete all as specified and directed. |
| 44 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 45 | Taking down unserviceable sub-main wiring (any numbers of cable) with rigid PVC/steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed. |
| 46 | Disconnecting/dismantling of old existing unserviceable DB's of any type/ways, 240/415 Volts including all fittings and fixtures such as MCCBsMCBs, isolator, etc complete all as specified and directed. |
| 47 | M & L for Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module flush to wall including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch complete all as specified and directed..(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) |
| 48 | All as per item No. 46 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto |
| 49 | M & L for Point wiring with two runs of single core 2.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS conforming to IS-694-1990 (ISI marked) drawn through and including stove enamelled steel conduit of Minimum 20 mm dia medium grade (ISI marked) concealed type including metal GI boxes of suitable module flush to wall including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 2.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one three pin modular switch socket outlet, 16 Amps on independent board complete all as specified and directed..(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) |
| 50 | S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed. |
| 51 | S & F Modular socket outlet 6A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 52 | S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed. |
| 53 | S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 54 | S & F modular bell push 6 am, 1 module,complete all as specified and as directed. |
| 55 | S & F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and as directed. |
| 56 | S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed. |
| 57 | S & F Telephone Socket RJ-45, suitable for CAT 6 cable, sheilded, folded metal, modular, 1 Module complete all as specified and as directed. |
| 58 | S & F TV coaxial Socket modular 1 module complete all as specified and as directed. |
| 59 | S & F LED lights fitting 1x 20W, 220V, AC (4ft), high performance electronic driver, operating temperature 10° C to 35°C, operating voltage range 140 V - 270V, average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 lm/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all accessories complete all as specified and directed. (Make: Havells Cat Part No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or equivelant of make as per list of manufacturer's) |
| 60 | S & F Recess mounting LED square shape slim ceiling light fittings, 42W or next higher rating, IP >= 20, Class I, CRI >=80, CT >= 5700 K, 600x600mm (aprox dimension) suitable for modular grid/armstrong ceiling, integrated type with high efficacy electronic driver, surge supressor of 2KV or more & high brightness LEDs, Luminaire efficacy > 95 lumen/Watt, power factor >=0.90 operating range - 140 to 270V, 50 Hz with suitable fixing arrangements complete with all accessories internally pre-wired and including connecting up with and including three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. (Make: Havells Cat Part No. PLANO2X2PLR42WLED857SG2 or equivelant of make as per list of manufacturer's) |
| 61 | M & L for Sub main wiring with 2 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper conductor cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.(Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) |
| 62 | M & L for Sub main wiring with 2 runs of Single core 4 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper conductor cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 4 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.(Note :- (i)Two runs of 4 sqmm and one runs of 4 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one ) |
| 63 | S & F Distribution board (vertical load line DB), double door made out of CRCA mild steel sheet, surface with insulated materials like polyester or with epoxy powder coating and IP43 & IK 09 protection, VTPN, 08 wat, 415 Volts with copper bus bar of rating 160 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and TP MCB as outgoing and making all necessary connection complete all as specified and as directed. |
| 64 | S & F MCCB, 4 Pole, 63 Amps rating (IcS=100% of Icu), 415 Volt, 16 KA breaking capacity with adjustable overload & adjustable short circuit setting thermal magnetic release complete all as specified and as directed . |
| 65 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB), TP of current carrying capacity 25-63Amps in the DB complete with connection testing and commissioning complete all as specified and as directed |
| 66 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB), TPN of current carrying capacity 40-100 Amps in the DB complete with connection testing and commissioning complete all as specified and as directed |
| 67 | S & F Distribution Board, SPN 12 Way, 240V, Double door with IP 43 protection, IK 09 with 200 Amps rated bus bar complete all as specified and as directed. |
| 68 | S & F Distribution Board, SPN 8 Way, 240V, Double door with IP 43 protection, IK 09 with 200 Amps rated bus bar complete all as specified and as directed. |
| 69 | Supply and fixing SPN, 32 Amp rating, 240V, 10KA, 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and as directed |
| 70 | Supply and fixing SP, 6-32 Amp rating, 240V, 10KA, 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and as directed |
| 71 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete with all accessories and electric connection including making necessary holes in walls and making good disturbed surfaces as per the existing one complete all as specified and directed |
| 72 | S & F Rigid non-metalic PVC conduit (25mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed. Total in Figures 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
