|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Repairs to floor tiles and wall tiles for OTM and Md Accn at zone C and zone D at Old Mil Stn Kapurthala under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster on brick work or concrete surfaces including racking out joints all as specified. |
| 3 | M&L for 10 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 to receive tiles complete all as specified and as directed. |
| 4 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) |
| 5 | M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour tiles complete all as specified and directed. |
| 6 | M&L for 25mm thick cement concrete (1:2:4) type B-1(20mm garaded agg) as in sub base under tiles all as specified and directed. |
| 7 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) and including dismantling of tiles complete all as specified and directed. |
| 8 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) and including dismantling of tiles complete all as specified and directed. |
| 9 | M&L for vitrified ceramic tile non skid coloured tiles 10mm thick (square/rectangular) polished area of each tile exceeding 0.42 sqm but n.exc 0.1.00 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) and including dismantling of tiles complete all as specified and directed. |
| 10 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified and directed. |
| 11 | S&L of CPVC pipe of outer dia 16mm SDR 11 and Plain CPVC SDR 11 fittings / adhesive(solution) on walls/ceiling or laying in floor complete all as specified and directed. |
| 12 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed. |
| 13 | S&L of CPVC pipe of outer dia 20 mm SDR 11 and Plain CPVC SDR 11 fittings / adhesive(Solution) on walls/ceiling or laying in floor complete all as specified and directed. |
| 14 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy long Body with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete. |
| 15 | S&F in repairs 15mm dia stop valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed. |
| 16 | S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fo size 15mm. |
| 17 | S&F in repairs 15mm Angle valve fancy type of CP cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed. |
| 18 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness . |
| 19 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and as directed. |
| 20 | S&F of PVC hollow wall & roof panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm c/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm c/c vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed complete all as specified and as directed. |
| 21 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings. |
| 22 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 23 | S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 24 | S&F of steel work in tabular trussess including special shaped washer etc complete using ERW or inductrion butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed. |
| 25 | M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laId over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab all aspecified and directed. |
| 27 | Mirror polishing of existing kota/marble stone flooring work where ever required to give high gloss finish complete all as specified and directed. |
| 28 | S&F in repairs CP greating round 75/100mm size (minium weight 50 gms) complete all as specified and directed. |
| 29 | S&F of 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 30 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in cement mortar (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and directed. |
| 31 | S&F of gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs. |
| 32 | M&L for 16-18mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick plaster in cement mortar 1:4 complete all as specified and directed. |
| 33 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 34 | Hacking out old broken glass(any thickness,size,quality or decription)from metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete all as specified and directed. |
| 35 | S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty/pins/springs in square n.exc 0.5 sqm in each panes complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
