|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Repairs to wall, joinery, sanitary fittings and other misc works in OTM and Md Accn at zone C and zone D kapurthala under GE Kapurthala. Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement paster pointed in white or colour cement to match the colour, including 10 mm thick cement screed bed (1:4) and including dismantling of tiles complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in (1:6) and including dismantling of tiles complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for coloured vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick cement mortar (1:6) screed bed and including dismantling of tiles completeall as specified and directed by Engr-in-Charge |
| 5 | M&L for granite tile for cooking platform 20mm thick machine cut, bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in cement mortar 1:6 and including dismantling of tiles complete all as specified and directed by Engineer-in-Charge. |
| 6 | Demolition of brick / block masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises. |
| 7 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for |
| 9 | Use and waste of form work to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 10 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas, shelf etc. complete all as specified and directed by Engineer-in-charge. |
| 11 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 12 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints complete all as specified and directed. |
| 13 | M&L for 12 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed. |
| 14 | M&L for 15mm thick rendering on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound complete all as specified and as directed.Note: water proofing compound shall be measured and paid seprately. |
| 15 | Supply only liquid water proofing compound. |
| 16 | M&L for 5mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in ceiling etc complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces of ceiling and applying 2mm thick birla white putty to obtain the true line to achieve smooth surface and applying three coats white wash on ceiling complete all as specified and directed by Engr-in-Charge |
| 18 | M&L for preparation of new plastered surfaces of walls and applying 2mm thick of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge |
| 19 | M&L for applying two coats of exterior emulsion (Apex) paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and as directed. |
| 20 | M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash over and including a coat of putty complete all as specified and directed by Engr-in-Charge |
| 21 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying 2 mm thick birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge |
| 22 | M&L for applying two coats of exterior emulsion (Apex) paint on old plastered or unplastered wall surface after complete removal of existing treatment complete all as specified and as directed. |
| 23 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 24 | M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection/hard standing finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 25 | M&L for PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base complete all as specified and directed by Engineer-in-charge. |
| 26 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4 sqm each. |
| 27 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each |
| 28 | Taking down shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each. |
| 29 | Taking down shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each including refixing in same opening after easing , cutting as required. |
| 30 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame with PCC (1:3:6) complete all as specified and directed. |
| 31 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed. |
| 32 | M&L for PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F of factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in -Charge |
| 34 | S&F of factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge. |
| 35 | S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening |
| 36 | S&F of factory made solid PVC panel shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as specified in SSR Part-II- 2004 SEC 8 CLAUSE 8b1 TO 8b 2.1complete all as specified and directed by EIC. |
| 37 | S&F of powder coated anodised aluminium frame (minimum thickness of powder coating 50 microns) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 38 | S&F of powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. (minimum thickness of powder coating 50 microns). complete all as specified |
| 39 | S&F of powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (2 no.) (minimum thickness of powder coating 50 microns). complete all as specified |
| 40 | S&F of steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar. |
| 41 | S&F of steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed. |
| 42 | S&F of floor door stopper of aluminium alloy body and tongue, anodised, Overall length of cover plate 140 mm , with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 43 | S&F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified |
| 44 | S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening |
| 45 | S&F of factory made solid PVC panel shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as specified in SSR Part-II- 2004 SEC 8 CLAUSE 8b1 TO 8b 2.1complete all as specified and directed by EIC. |
| 46 | S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm long. |
| 47 | S&F of 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified. |
| 48 | S&F of 150 mm hasp and staple, aluminium anodised, wire type, including bolt to hinge plate and fixed with screws |
| 49 | M&L for preparation of old wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 50 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 51 | M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge. |
| 53 | S&F of 4.00mm thick plain glass in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engineer-in-charge. |
| 54 | S&F of 4.00mm thick figured glass, pinhead type in squares n.exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed. |
| 55 | S&F of 5.50mm thick plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads all as specified. |
| 56 | S&F of aluminium (die cast body) Door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 57 | S&F of glavanised MS wire cloth, 0.56mm nominal dia of wore and average with of aperature 1.00mm and fiexed with tinned tacks or galvanised wire staples. |
| 58 | S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.40mm and fixed with tinned tacks/screws with bolts incl leaping wooden. |
| 59 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings. |
| 60 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 61 | S&F of pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 62 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness . |
| 63 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips all as specified. |
| 64 | S&F of PVC hollow wall & roof panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm C/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm C/C vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed complete all as specified and as directed . |
| 65 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F of GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors. |
| 67 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F of GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors. |
| 69 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 70 | S&F in repairs 15mm dia stop valve, CP cast copper alloy with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 71 | S&F in repairs fancy type chromium plated stop valves/ angle valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fo size 15mm. |
| 72 | S&F in repairs 15mm dia pillar taps fancy type long neck of cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed or iron pipe and fixed complete all as specified and directed. |
| 73 | S&F in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 74 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity, white in colour and PVC flush pipe 32mm dia complete all as specified and directed. |
| 75 | S&F of vitreous china ware wash basin white, flat back size 550 X 400mm with pedestal including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. |
| 76 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 77 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 78 | S&F in 20mm dia aluminium chromium plated tubular towel rails, D type, 60cm long between flanges,complete all as specified and directed. |
| 79 | S&F in repairs CP greating round 75/100mm size (minium weight 50 gms) complete all as specified and directed. |
| 80 | S&F in repairs 32 mm bore PVC waste cupling with PVC waste pipe for WHB complete all as specified and as directed. |
| 81 | S&F in repairs 40 mm borePVC waste cupling with PVC waste pipe for Sink complete all as specified and as directed. |
| 82 | S&F in steel plate rack made of stainless steel 1mm thick over all size 600 mm x750mm complete all as specified and directed. |
| 83 | S&F in 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 84 | S&F in repair kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 85 | S&F of soap dish, cromium plated approx size 160x160x90mm complete all as specified and directed. |
| 86 | S&F of shelf of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats(min. weight 300gm) complete all as specified and directed. |
| 87 | S&F in repair anodised aluminium alloy curtain rail chromium plated with fixing brackets, stops, roller etc as specified and directed. |
| 88 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and directed. |
| 89 | Taking down eaves gutters and rainwater pipes including all fittings as specified and directed. |
| 90 | S&F of 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F of 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F of 75 mm PVC (SWR) bend complete all as specified and directed by Engineer-in-Charge. |
| 93 | S&F of 110 mm PVC (SWR) bend complete all as specified and directed by Engineer-in-Charge. |
| 94 | S&F of 110mm PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed by Engineer-in-Charge. |
| 95 | S&F of 110mm PVC (SWR) junction single,(double T) equal or unequal complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 97 | Dismantiling water tank PVC 500 Ltrs and removing from site as directed. |
| 98 | Dismantiling water tank PVC 1000 Ltrs and removing from site as directed. |
| 99 | S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 500 ltrs capcity incl fittings and as directed by Engr-in-Charge |
| 100 | S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings and complete all as specified and directed. |
| 101 | S&F of gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and directed. |
| 102 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs . |
| 103 | Demolition of mud in roof any thickness including plastering & leeping removed as directed by Engr-in-Charge |
| 104 | M&L for 40 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as in PCC padding over roof slab complete all as specified and directed. |
| 105 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound complete all as specified and directed.Note :- WPC to be measured and paid seprately |
| 106 | Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed. |
| 107 | M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:4 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed. |
| 108 | - ditto - all as per item No. 106 above but except brick tiles including cleaning from mortar complete all as specified and directed. |
| 109 | M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed. |
| 110 | S&F of brass CP sink mixer wall mounted for mixing of hot & cold water screwed down for iron pipe and fixed complete all as specified and directedby the Engr-in-charge. |
| 111 | S&F of brass CP wall mixer shawer set for mixing of hot & cold water screwed down for iron pipe and fixed complete all as specified and directedby the Engr-in-charge. |
| 112 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
