|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Certain misc repairs to drain, fencing, gates, pathway, boundary wall etc at Old Mil Stn Kapurthala under GE Kapurthala. Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of brick work built in cement mortar including quoins, arches and pillars etc. all as specified and directed by Engineer-in-Charge. |
| 3 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer-in-Charge . |
| 4 | Demolition of cement concrete is reinforced of any descrip-tion and in any position not otherwise specifically provided for all as specified and directed by Engineer-in-Charge . |
| 5 | Taking down cement plaster on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer-in-Charge . |
| 6 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:4 all as specified and directed by Engineer-in-Charge . |
| 7 | All as per serial item No. 5 here in before but except bricks including cleaning complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 9 | All as per serial item No. 7 here in before but except bricks including cleaning complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in sub base all as specified and directed by Engineer-in-Charge . |
| 11 | M&L for plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified. |
| 12 | M&L for providing precast cement concrete Type B0 1:2:4 set in cement mortar 1:4 louvres and jallies, 40mm thick measured solid, including all mouldings and frames, all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in drain cover slabs, of any thickness, size or shape including necessary from work, finished concrete surfaces fair and even in cement mortar set in cement mortar 1:4 all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for reinforced concrete 300mm dia pipe class NP-3 laid & jointed with collars complete all as specified and directed |
| 15 | M&L for mild steel TMT bars10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer-in-Charge . |
| 16 | All as per serial item No.14 here in before but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer – in – Charge. |
| 18 | M&L for providing cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing |
| 19 | M&L for machine pressed precast conc. interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for chequered coloured cement concrete tiles 25cm x 25cm x 25mm thick set, jointed and pointed in neat cement slurry and pigments as in floors over 15mm thick screed bed in cm mortar 1: 6 complete all as specified and directed by Engineer-in-Charge . |
| 21 | M&L for rendering 15mm thick on fair faces or other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge . |
| 22 | M & L for preparation of newly plastered and unplastered surfaces of wall and applying two coats of exterior emulsion/ weather proof paint over 2mm wall care putty complete all as specified and directed by Engr-in-charge. |
| 23 | M&L for preparation of new plastered surfaces of drain and applying two coats of whitewash on drain sides complete all as specified and directed by Engr-in-Charge |
| 24 | M & L for preparation of old plastered and unplastered surfaces of wall and applying two coats of exterior emulsion/ weather proof paint over 2mm wall care putty complete all as specified and directed by Engr-in-charge. |
| 25 | M&L for preparation of old treated/decorated surfaces of walls by scraping down smoke soot, moulds, moss and effloreescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two coats of cement base paint complete all as specified and directed. |
| 26 | Taking down old unserviceable steel gates any size any shape any description complete all as specified and directed y Engineer-in-charge. |
| 27 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to GDE Fe410, E-165 complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F of mild steel plain black sheeting 1.25mm thick welded as in door shutters complete all as specified and directed by Engineer-in-Charge |
| 29 | M&L for 25 mm thick cement conrete 1:2:4 type B1 using 20mm graded stone aggregates flooring finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge . |
| 30 | M&L for glazed ceramic coloured tiles of size 450X 350X 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for non skid ceramic coloured tiles 6 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade as in floors over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 32 | Dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in conc or brick masonary and making good disturbed ground all as specified and directed by Engineer-in-Charge. |
| 33 | Dismantling of fencing wire mesh, any type, any size all as specified and directed by Engineer-in-Charge. |
| 34 | S&F of MS work such as angle iron post, flat iron in fencing including cutting tops and making swan neck including welding, drilling holes, notching for wire, etc embedded in concrete fixed vertically, conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 35 | S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed by Engineer-in-Charge. (Each line to be measured separately) |
| 36 | Restraining resecuring including making good galvanised steel barbed wire any dia barbed with any dia barbs at any spacing and any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed by Engineer-in-Charge. (Each line to be measured separately) |
| 37 | Supply only galvanised Iron hot dipped chain link fencing, any size or type complete all as specified and directed by Engineer-in-Charge. |
| 38 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire |
| 39 | M&L for steel Round bars Fe-410 -W (Gde E-250) 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 40 | M&L for MS screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts exc 10 cm and not exc 15mm , dia of neck 5 to 10mm all as specified and directed by Engineer-in-Charge. |
| 41 | M&L for applying two coats of synthetic enamel paint on preparation of newly steel surfaces over a coat of zinc chromate primer any description over 10 cm width of girth not otherwise described all as specified and directed by Engineer-in-Charge . |
| 42 | M&L for preparation of old steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 43 | Dismantling of existing drain removing of mud, soil, etc for a depth of 1m and deposit at 500m away from the site complete all as spefied and directed by Engineer-in-Charge. |
| 44 | M&L for rolled sections as in post , main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates of Fe-290 grade E-250 complete all as specified. |
| 45 | S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engineer-in-Charge |
| 46 | S&F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
