|
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. Note : Work will be in patches or in bulk |
| 2 | M & L for Granite of black (colour as approved by Engr-in-charge) of any type machine cut as in Cooking Platform/steps/counter tops, 16-18 mm thick, set and jointed in cement slurry over & including screed or 20 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished marble and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified .Note : Single piece should be used in Cooking Platform/steps/cills/jambs/shelves. |
| 3 | M & L for Sand stone 5cm thick slabs in shelves, cills, landings, cover stones, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed by Enginer in charge. |
| 4 | M & L for marble (colour as approved by Engr-in-charge) of any type machine cut Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, partition of kitchen, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with mar |
| 5 | S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall complete all as specified and directed by Enginer in charge. |
| 6 | S&F in repair sink without drainage board made of stainless steel 1 mm thick SS 304 grade kitchen or laboratory with plugs, washers ,PTMT waste 40MM and waste pipe including bedding in cement morter to dwarf wall or including fixing in granite and connecting union to pipe bowl size 535mmx455mmx 203mm.glossy finishetc. complete all as specified and directed. |
| 7 | Supply & Fixing in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 8 | Supply & Fixing in repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 9 | S&F in repairs 15mm bore Brass CP kitchen sink mixer for mixing hot & Cold water screwed down for iron pipe complete all as directed by Engineer in charge. |
| 10 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 11 | M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement. |
| 12 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 13 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X350X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 14 | Dismantling boarding of any description fixed in any position with nails, complete all as specified and as directed. |
| 15 | S & F fixing factory made 18mm acrylic HDHMR board in modular kitchen shutters with 1mm same edge bending on edges for kitchen cabinets/Cupboards etc. including fixed with nut, screws, washers, nails all as specified and directed by Engr-in-charge. |
| 16 | supply and fixing factory made 9mm both side laminated board, interior grade, prelaminated both sides with decorative choice laminations, including fixed with nut, screws, washers, nails all as specified and directed by Engr-in-charge. |
| 17 | supply and fixing factory made 18mm both side laminated HDHMR board in modular kitchen carcasse made of minifix joint with 1mm same colour edge banding including fixed with nut, screws and washers fevicol, nails complete all as specified and directed by Engg-in-charge. |
| 18 | Demolition of stone/brick masonry built in cement or cement lime mortar as in portion ordered and directed. |
| 19 | M & L for brickwork with sub-class `B`, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 20 | Taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 21 | M & L for rendering 5 mm thick ready mix self curing plaster on ceilling by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 22 | M&L three coat of white wash on new surface of ceilling including preparation of surfaces complete all as directed. |
| 23 | M & L for rendering 10mm thick ready mix plaster on internal wall by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed |
| 25 | S & F powder coated stainless steel SS 304 sensys intergrated soft cose hinges having size 103x64mm finish of nicle/silver complete all as specified and directed by Engr-in-charge. |
| 26 | S & F aluminium Gprofile cabinet/ drawers handle in shutter of approved make and shape complete all as specified and directed. |
| 27 | S & F powder coated stainless steel innotech cutlery drawer system SS 304 size 500×100 mm including organiser channel having weighing capacity of 25 Kg complete all as specified and directed. (SS channels paid separately under item No 33 ) |
| 28 | S & F powder coated stainless steel innotech drawer system SS 304 size 500×100 mm including organiser channel having weighing capacity of 25 Kg complete all as specified and directed (SS channels paid separately under item No 33 ) |
| 29 | S & F powder coated stainless steel innotech pot and pan drawer system SS 304 size 500×150 mm including railing organiser channel having weighing capacity of 25 Kg complete all as specified and directed (SS channels paid separately under item No 33 ) |
| 30 | S & F powder coated stainless steel innotech thali inlet drawer system SS 304 size 500×150 mm including railing organiser channel having weighing capacity of 25 Kg complete all as specified and directed (SS channels paid separately under item No 33 ) |
| 31 | S & F powder coated stainless steel, 2 shelf pullout basket SS 304 size (150×485×430mm) complete all as specified and directed (SS channels paid separately under item No 33 ) |
| 32 | S & F powder coated stainless steel drawer/ basket channel SS 304 size 50cm complete all as specified and directed. |
| 33 | S & F powder coated stainless steel cabinet / drawers handle SS 304 having a length of 250mm and shape complete all as specified and directed. Please Enable Macros to View BoQ information |
