|
| 1 | Demolition of unreinforced cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specified and directed. |
| 2 | Cleaning of any types of pipe lines of size upto 150mm dia/bore, removing the blockages by rodding using bamboo spilt or by mechanical means i.e pressure pump incl vertical stack pipes (where ordered ), cleaning accessible door of bends and T etc and taking out debris, sludge of any solid/foreign materials from pipe line and flushing with water after cleaning complete incl removing the debris outside MD land all as specified and directed. |
| 3 | Cleaning of existing Roof surfaces and removal of silt, mud & dry leaves deposited there in and clearance of all rain water pipe and exist spouts and make free from any type of blockages in rain water pipe/spouts etc without damaging the pipe complete all as specified and as directed |
| 4 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store boreof pipe in 20 mm. |
| 5 | Refixing old steel tubing and connection in new or old position (walls, ceiling, floors, etc.) bore of pipe in 20mm . |
| 6 | S&L ' Medium grade' galvanised Tubes 20 mm dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors. |
| 7 | Supplying and laying in repair of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed. |
| 8 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe in 25mm. |
| 9 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe in 25mm |
| 10 | S&L ' Medium grade' galvanised Tubes 25 mm dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors. |
| 11 | Supplying and laying in repair of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed. |
| 12 | Disconnecting existing tanks, setting aside (or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position . Capacity of tank 500Lts. |
| 13 | Disconnecting existing tanks, setting aside (or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position . Capacity of tank 1000Lts. |
| 14 | Dismantling of water tank of capacity of tank 500 Lts all as directed. |
| 15 | Dismantling of water tank of capacity of tank 1000 Lts all as directed. |
| 16 | Dismantling of water tank of capacity of tank 2000 Lts all as directed. |
| 17 | S&F Rotational moulded polyethylene wate storage tanks of 500 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position incl 20mm dia HD polythene float valve and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 18 | S&F Rotational moulded polyethylene wate storage tanks of 1000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position incl 25mm dia HD polythene float valve and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 19 | S&F Rotational moulded polyethylene wate storage tanks of 2000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position incl 25mm dia HD polythene float valve and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 20 | S&F in Repairs PVC Water tanks Lids / covers with PVC Locking device for tank capacity in litres Exc 500, n exc 2000 . |
| 21 | S&F in repair 20 mm PTMT ball valve with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed Min wt 20mm-210 grms ,high pressure with polythene float and fly nut complete screwed for iron pipes fixed. |
| 22 | S&F in repair 25 mm PTMT ball valve with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed Min wt 25mm-455 grms ,high pressure with polythene float and fly nut complete screwed for iron pipes fixed. |
| 23 | S&F in repair PTMT grating doom 125 mm dia (minimum wt 40gms) fixed with cement or adhesive required as per site all as directed by Engr-in-Charge. |
| 24 | S&F in Repairs PTMT Bib tap long body standard of any colour 15mm in size. (Minimum weight 15mm-120gms). |
| 25 | S&F in Repairs PTMT Stop cock standard of any colour 15mm in size. (Minimum weight 20mm-92gms). |
| 26 | Dismantling of 100mm dia any types of pipes, jointed in cement mortar and taking out of trenches or floor/wall, if required. |
| 27 | S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches/walls 110 mm bore pipe. |
| 28 | All as per above Sl item no 27, but for 75mm bore pipe. |
| 29 | S&F PVC (SWR) branches pieces single ' Y / bends / Tee (equal or unequal ) of 110 mm bore. |
| 30 | S&F PVC (SWR) bends (equal or unequal ) of 110 mm bore. |
| 31 | S&F PVC (SWR) bends with access door (equal or unequal ) of 110 mm bore. |
| 32 | S&F PVC (SWR) Tee (equal or unequal ) of 110 mm bore. |
| 33 | S&F PVC (SWR) Tee with access door (equal or unequal ) of 110 mm bore. |
| 34 | M&L for provinding 100mm thick cement concrete in 1:2:4 type B1, (using 20mm graded stone aggregate) finishing cement concrete surface even and fair without using extra cement as in plinth, Path/hardstanding complete all as directed. |
| 35 | M&L for Prepolished Chequered cement concrete tiles of size 30cm X30cm X 25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thich screed bed in CM 1:6 complete all as specified and directed. |
| 36 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl over screed bed or bedding layer of mortar 15mm thick for laying tiles in cement mortar 1:6 complete all as directed. |
| 37 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl over screed bed or bedding layer of mortar 15mm thick for laying tiles in cement mortar 1:6 complete all as directed. |
| 38 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) of 25mm thick as in correction layer finished surfces even and rough to receive floor finish complete all as directed. |
| 39 | M&L for PCC 75mm thick, 1:4:8 type D-2 40mm stone aggregate as in sub base of flooring complete all as specified and directed. |
| 40 | M & L hard core of broken bricks gauge n. exc 63 mm, deposited spreaded and leveled in layer not exc 15 cm thick, watered and rammed to atrue surface, broken stone or boulder. |
| 41 | M&L cement plaster (1:4) 15 mm thick on fair faces of brick work or concrete surfaces even and fair without using extra cement. |
| 42 | M&L for prep of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed complete. |
| 43 | Taking down cement plaster on brick work or stone walls etc incl raking out joints hacking for key scrubbng down with water complete all as directed. |
| 44 | M&L Plain cement concrete 1:3:6 type C-1(using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 45 | M&L preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. Please Enable Macros to View BoQ information |
