|
| 1 | Lumpsum price worked out by the contractor for Building work as listed in Schedule 'A' Part-I. |
| 2 | Lumpsum price worked out by the contractor for Internal water supply as listed in Schedule 'A' Part-II. |
| 3 | Lumpsum price worked out by the contractor for Internal electric Supply as listed in Schedule 'A' Part-III. |
| 4 | Lumpsum price worked out by the contractor for Plumbing work as listed in Schedule 'A' Part-IV. |
| 5 | Lumpsum price worked out by the contractor for Site clearance as listed in Schedule 'A' Part-V. |
| 6 | Lumpsum price worked out by the contractor for Road, Path, and culverts as listed in Schedule 'A' Part-VI. |
| 7 | Lumpsum price worked out by the contractor for Sewage Disposal as listed in Schedule 'A' Part-VII. |
| 8 | Lumpsum price worked out by the contractor for Security fencing and compound wall as listed in Schedule 'A' Part-VIII. |
| 9 | Lumpsum price worked out by the contractor for Area Drainage as listed in Schedule 'A' Part-IX. |
| 10 | Lumpsum price worked out by the contractor for Protective work as listed in Schedule 'A' Part-X. |
| 11 | Lumpsum price worked out by the contractor for External Electric Supply as listed in Schedule 'A' Part-XI. |
| 12 | Lumpsum price worked out by the contractor for External Water Supply as listed in Schedule 'A' Part-XII. |
| 13 | Lumpsum price worked out by the contractor for Lightning Protection as listed in Schedule 'A' Part-XIII. |
| 14 | Lumpsum price worked out by the contractor for Hot Water Supply as listed in Schedule 'A' Part-XIV. |
| 15 | Lumpsum price worked out by the contractor for Dismentling/ Demolition Of Buildings as listed in Schedule 'A' Part-XV. |
| 16 | PROVISIONAL SUMa) Provide a Provisional Sum for:- (i) Football Ground : 01 No(ii)Hockeyt Ground : 01 No(iii) Volley ball Court : 02 No(iv) Basket ball Court : 02 No (v) Parade Ground : 01 No |
| 17 | Painting of lines, dashes, arrows, letters etc on road pavement (Bituminous surfaces) and the like using thermoplastic paint with 8% glass beads using special applicator machine with heating arrangement upto 160ºC complete all as directed by Engr-in-Charge. Make : Shivalic, Kothari, Jayanti & Swastic. |
| 18 | Road stud DA 971P Model, ABS Engineering plastic, dynamically designed having height impact strength and fitted with 02 Nos highly reflective reflectors on both sides, size 110x 128x29.5 wt 248 gms (appx) fixed with epoxy on road. Make : DARK EYE Model : DA-971P or equivalent as approved by GE. |
| 19 | Delineator road 47x600mm, dual directional Retro reflective round delineator made of 16 gauge MS pipe of outer dia 47mm and duly powder coated and have three reflective band of colour white, red and yellow, protected with welded wire mesh cage, fixed in position in PCC 1:2:4 foundation size 25cmx25cm deep and cleaning site complete. Make : Greenlite or equivalent as approved by GE. |
| 20 | Road sign boards comprising of 1 plates of size 1200mmx900mm fixed one above the another made of 2mm thick aluminium sheet duly framed in 40x40mm square MS pipe of 16 gauge and provided with 25x25mm hold fasts. The plate fixed with aluminium rivets and written on both sides indicating the direction with single arrow on each plate with computer cut letters and signs (Reflective)( as directed of appropriate size and white colour and 12mm reflective boarder all round the plates over retro reflective sheeting of Avery Dennison HIP base blue. The boards (plates) supported with bolts over a pair of legs made of MS square tubes 75mmx75mm of 16 gauge sheet of length (height) 11’ each above ground including embedding in PCC (1:2:4) Type B-1, blocks of size 60cmx 60cmx75cm making posts holes & earth work complete. The pipes to be painted with black and white 1st quality synthetic enamel paint two coats of red oxide primer (Pegged sign boards fully reflective) complete all as specified and as directed |
| 21 | Point wiring with 1.5 sqmm copper conductor cables (multistranded), PVC insulated , unsheathed FRLS (using colour code as per IS), 1100 Volts grade in and including concealed PVC rigid conduit of thickness not less than 1.8mm thick heavy duty (ISI marked) of adequate size with sunk cast iron/pressed steel terminal box of adequate size with 3mm thick plastic laminated sheet top cover for one light /fan/bell/exhaust fan point controlled by one, one way switch including continuous 1.5 sqmm copper conductor (multistranded using colur code) FRLS PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified and conforming to IS-694 complete all as specified and directed. |
| 22 | All as per item No 21 here-in-before but for one light point controll by two way switch. |
| 23 | All as per item No 21 here-in-before but for one 3 pin socket outlet 5 Amps independent. |
| 24 | All as per item No 21 here-in-before but for one 3 pin socket outlet 5 Amps on the same board with other switches. |
| 25 | Point wiring with 2.5 sqmm copper conductor cables (multistranded, single core), PVC insulated , unsheathed FRLS (using colour code as per IS), 1100 Volts grade in and including ERW rigid steel conduit of thickness not less than 1.8mm thick heavy duty (ISI marked) of adequate size with flame proof sunk cast iron/pressed steel terminal box of adequate size with 3mm thick plastic laminated sheet top cover for one light /fan/bell/exhaust fan point controlled by one, one way switch socket 16 Amps including continuous 2.5 sqmm copper conductor (multistranded using colur code) FRLS PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly/ metalic body of light fitting complete all as specified and conforming to IS-694 complete all as specified and directed. |
| 26 | LED tube light, fitting complete 1x39 watt surface/pendent mounted (totally enclsed) single phase 220V alongwith suitable LED lamp complete. Make-Wipro cat Part No. LE20-491-XXX-57-XX or equivalent of Philips/Bajaj. |
| 27 | MCB SPN 6 to 32 amps, 240V with 10 KA breaking capacity all as specified and directed. |
| 28 | MCB SPN 40 to 63 amps, 240V with 10 KA breaking capacity all as specified and directed. |
| 29 | MCB SP 6 to 32 amps, 240V with 10 KA breaking capacity all as specified and directed. |
| 30 | MCB SP 40 to 63 amps, 240V with 10 KA breaking capacity all as specified and directed. |
| 31 | Blanking plate for MCB DB's all as specified and directed. |
| 32 | MCCB TPN 415V, 50Hz, 100 Amp, 16 KA,thermal release adjustable type (70% to 100 % ) all as specified and directed. |
| 33 | Lamp holder, PVC/Polycarbonate type with back plate suitable forbatten fittings including LED 09 W complete all as specified and directed. |
| 34 | Provision of TV socket complete including necessary conduit pipe and making holes on existing walls as required size. |
| 35 | Provision of Telephone socket complete including necessary conduit pipe and making holes on existing walls as required size. |
| 36 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.00mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI wire of size 4 mm by means of bolts, nuts, check nuts and washers of GI. 15 mm bore GI pipe medium grade for protection of GI wire from earth plate to testing point for protection, 20mm bore GI pipe light grade for water with wire mesh and funnel for watering including necessary excavation and earth work, PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified.NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item.(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50 m and the rate includes in the unit rate of item.(iii) The earth chamber shall be constructed not less than 3.0m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate quoted for this item. |
| 37 | Galvanised earth lead wire 4.0 sqmm including requisite nut, bolt and washer as per site requirement complete all as specified and directed. |
| 38 | PVC rigid concealed conduit pipe 20 sqmm bore, heavy grade (ISI marked) of thickness not less than 1.8mm including all accessories complete all as specified and directed. |
| 39 | LED street light fitting complete 1X20 Watt,230 volt, energy saving and environmental friendly long life versatile pressure dicast aluminium IP- 66 road way luminary with high power LED as light source and electronic driver complete mounted on wall/pole with 40mm dia 1.2 mtr long medium grade GI Pipe bent to shape mounted on wall with the help of 02 Nos of FI 40x6mm size holding clamp with nuts, bolts and washers duly grouted and making electrical connection with 1.5 Sqmm three single core PVC insulated unsheathed copper conductor cable multistranded cable from ceiling rose to light fittings, complete with all accessories internally pre wired complete all as specified and directed. Make:-HAVELLS Cat part No. LHETAXU7UN6J020 or equivalent of Philips/CG /Bajaj/Halonix |
| 40 | LED type tube light fittings complete 1X20 watt 230 volts wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete with all accessories complete all as specified and directed. Make:-HAVELLS Cat part No. EWEBP5IN1W020 or equivalent of Philips/CG /Bajaj/Halonix |
| 41 | CFL light, 1X11 Watt,230 volt,decorative (miror light) wall mounting type with polycarbonite rings and glass shade with lamp holder , connectror block including CFL 1x11 W etc. complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.Make- HAVELLS, Bajaj and CG |
| 42 | Tube light fitting 2X36 watt 230 volts wall mounted batten type, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size. Cat Part No-LHEWEBP51N1W020. Make of Havells or make equivalent in philips, Bajaj and CG |
| 43 | Supply and installing Water heater storage vertical type, electric supplied and installed complete capacity 25 litre, complete all as specified and directed by Engr-in- Charge |
| 44 | Supply and installing Water heater storage vertical type, electric supplied and installed complete capacity 50 litre,complete all as specified and directed by Engr-in- Charge |
| 45 | Surface mounted LED down lighter (Porch light) in powder coated white funish with integrated electronic driver 21 watt LED 5700 K complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete with all accessories complete all as specified and directed. Make : Havells / philips, Bajaj and CG. |
| 46 | Exhaust fan 305mm sweep, single phase, 1400 RPM, heavy duty with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC M-15(nominal mix) blocks complete all as specified. Model: Bahar of Bajaj or equivalent in Havells, CG & Phillips |
| 47 | Flame proof exhaust fan 305mm sweep, single phase, 1400 RPM, heavy duty with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC M-15(nominal mix) blocks complete all as specified. Cat Part No. EF/140 of Sudhir or equivalent in shyam switch gear/Bajaj |
| 48 | Exhaust fan 380mm sweep, single phase, 1400 RPM, heavy duty with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC M-15(nominal mix) blocks complete all as specified. Model : Superme Plus of Bajaj or equivalent |
| 49 | Ceiling fan 1200mm sweep 5 star BEE rating including stepped type electronic fan regulator flush type, connecting up including provision of cable PVC 03 core 23/0.0076 from ceiling rose to connector of fan complete all as specified.Model - Excel Star of Bajaj or equivalent |
| 50 | Single phase static energy meter of accuracy class 1.0,240V, 50Hz of rating 10 to 60 amp, V,KW, six month history of energy & MD in KW, complete all as specified and directed. |
| 51 | Three phase static energy meter of accuracy class 1.0 3x,240V, 50Hz of rating 10 to 60 amp, V,KW, six month history of energy & MD in KW, complete all as specified and directed. |
| 52 | Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe medium grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe light grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified.NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item .(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item. . |
| 53 | Earthing complete with copper steel earth plate electrode 60 cm x 60 cm x 3.15mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including copper strip of size 20x3.15 mm by means of bolts, nuts, check nuts and washers and 20 mm bore GI pipe light grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified.NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item |
| 54 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.00mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI wire of size 4 mm by means of bolts, nuts, check nuts and washers of GI. 15 mm bore GI pipe medium grade for protection of GI wire from earth plate to testing point for protection, 20mm bore GI pipe light grade for water with wire mesh and funnel for watering including necessary excavation and earth work, PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified.NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item (ii) The earth chamber shall be constructed not less than 3m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate quoted for this item. |
| 55 | Ductile iron pipe, S/S type of 150mm dia special class K-7 suitable for tyton joint including jointing material/joints complete all as specified |
| 56 | Construction of brick masonry valve pit of size 90x90x105cm (internal dimension of chamber) with brick work in cement mortar 1:4 including plastering internally and externally above GL as the work proceeds complete with MS sheet cover 3.15mm thick and angle iron frame 40X40X6mm with handle duly embedded in coping of PCC 1:2:4 type B-I, locking arangement and painting with two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces including earth work & excavation in any type of soil, disposal of surplus spoil not exceeding 50m,concrete etc all as specified and shown on drawing. |
| 57 | Construction of brick masonry valve pit of size 120x120x130 cm (internal dimension of chamber) with brick work in cement mortar 1:4 including plastering internally and externally above GL as the work proceeds complete with MS sheet cover 3.15mm thick and angle iron frame 40X40X6mm with handle dult embedded in PCC 1:2:4 type B-I, locking arangement and painting with two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces including earth work & excavation in any type of soil, disposal of surplus spoil not exceeding 50m,concrete etc all as specified and shown on drawing. |
| 58 | Cutting of road/hard standing 30cm deep by any means 14RM (Approx) suitable for 150mm DI/GI pipe and making good disturbed road complete all as specified as directed by EIC. |
| 59 | Cutting of existing CI pipe line 150 mm dia in position for insertion of CI tee 150mmx150mmx150mm tee for branch connection all as directed by engineer incharge.Note:- CI Tee, joints/excavation shall be measured separately under relevant item. |
| 60 | Cutting of GI Pipe Medium grade 150 mm approx 1 mtr length dia in lethe machine at both ends & M & L for fixing by welding MS Flanged not less than 10 mm thick duly holes drilled duly matched with the flange of 150 mm dia sluice valve & making threads at second ends and fixing 150 mm dia socket for onward connecton to GI pipeline 150 mm dia. Note: GI pipe shall be measured under relative items |
| 61 | Cutting of GI Pipe Medium grade 100 mm dia in lethe machine at both ends & M & L for fixing by welding MS Flanged not less than 10 mm thick duly holes drilled duly matched with the flange of 100 mm dia sluice valve & making threads at second ends and fixing 100 mm dia socket for onward connecton to GI pipeline 100 mm dia.Note: GI pipe shall be measured under relative items |
| 62 | Cutting of GI Pipe Medium grade 80 mm dia in lethe machine at both ends & M & L for fixing by welding MS Flanged not less than 10 mm thick duly holes drilled duly matched with the flange of 80 mm dia sluice valve & making threads at second ends and fixing 80 mm dia socket for onward connecton to GI pipelin 80 mm dia.Note: GI pipe shall be measured under relative items |
| 63 | -- Do-- But size 100 mm dia . |
| 64 | -- Do-- But size 80 mm dia . |
| 65 | Supply, installation, commissioning and testing of ECO friendly diesel engine driven water cooled generating set of capacity 62.5 KVA / 50KW, 415 volts, AC supply, 50 Hz, 3 phase 04 wire, 0.8 PF at NTP, speed 1500 RPM mounted on common base plate with flexible coupling and meeting the requirement of IS-4722/BIS specification with CPCB approved accoustic enclosures fabricated out of CRCA sheets 2mm thick and structural sheet metal base frame. Sound proofing of enclosures is done with high quality foam conforming to IS-8183 of 25mm thickness and density 30 Kg/M3 complete including PCC foundation in all respect complete as per manufactures recommendations-(a) DIESEL ENGINE : Water cooled diesel engine of adequate capacity at 1500 RPM generally in accordance with latest BIS/IS specification provided with blower fan, 12 volts self starting including maintanance free battery of suitable capacity, charging dynamo/alternator, air cleaner, diesel/oil filters, complete in all respect. The engine shall be capable of taking 10 % over load for one hour for every 12 hours running confirming to the environment (PROTECTION ACT 1986) (29 pf 1986) and as amended vide Gazette of India Notifications Part-II Section-III Sub Section (I) dated 12 Jul 2004. (b) ENGINE INSTRUMENT PANEL : All relevant information shall be displayed on a complete panel for easy monitoring of lubricant, oil pressure, battery charging, ammeter, hours meter, starting switch, etc. |
| 66 | (c) FUEL TANK : In built fuel tank of adequate capacity with stop cock, drain plug and necessary fuel pipe complete as per manufacturers recommendations(d) ALTERNATOR : 62.5 KVA (50 KW) at NTP, 3 Phase, 50 Hz, 415 volts, AC supply, 08. PF at 1500 RPM, this shall be self excited screen protected and drip proof type bruchless, conforming to relevant IS/BIS code as per latest manufacturing schedule : Make Kirloskar Electric/CG/Stamford/Bharat Bijlee/Jyoti/Siemens. (e)CONTROL PANEL : The standard control panel shall be built in acousitc enclosures with the following accessories complete wired with suitable size of coppe cable :- (i) MCCB of suitable rating with over load and short circuit protection. (ii) Digital Ammeter. (iii) Digital voltmeter. (iv) One set of indicating LED lamps RYB and fuses. (v) Frequency meter, RPM meter, Hour meter, Fuel level indicator. (vi) KWH meter electronic tamper proof digital for 3 phase 415 volt AC unbalanced load of suitable capacity. (vii) Water temperature, oil pressure gauge. Note : The Gen set must be affixed with label meeting the following requirement (The label shall be durable and legible) (a) Name and address of the engine manufacturer. (b) Statement that this engine conforms to the environment (PROTECTION)(c) Type and approval certificate number. (d) Date and manufactured of gen set. |
| 67 | (f) ACCOUSTIC ENCLOUSER :- Accoustic enclousure is made out of CRCA sheet and ISMC base frame painted. The walls of enclosures will be insulated with rock wool so to canopy with 75 dba at 1 Mtr sound leveled by minstry of environment and forest. The enclosure shall have following provisions :- walls of enclosure will be insulated as per manufacturers recommendations with the following- (i) Fitting arragement (ii) Point for neutral and body earthing (iii) Lub oild drainage (iv) Air breather (v) Hood or rain protection (vi) Easy stop push button (vii) Panel meter viewing window (viii) Exhaust fan of suitable cap and sweep (ix) Tube light fitting 1x14 Watt -02 Nos Note : (I) DG set should be sound proof as per latest policy.(ii) First filling of Engine oild and fuel etc should be arranged by contractor. |
| 68 | Boring of holes of places under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure,complete all as specified and directed by Engr-in- Charge |
| 69 | Supply, Fabrication, Installation, Testing & Commissioning (CPRI certified approved) 440V AC LT APFC Panel for 200 KVA Transformer Rating - 40 kVAr (Without Harmonic Block Reactors), indoor /out door type, Compartmentalized, Modular, outdoor Type in 3.15 MM CRCA Sheet of Appropriate Size, Front Operatable Double Doors, Front & Back Openable only, Dust & vermin proof, Cable Entry through 3.15MM CRCA Gland plates - Bottom only, Powder Coated Siemens Grey Shade on Body/ Doors & Orange Shade on Mounting/ Gland Plates + Incomer Doors, 3Phase HR Sleeved Color Coded Aluminium Main Busbar of 200A -3 Nos with Transparent FRP Covers & on SMC/ DMC Supports, 50x5MM Aluminium Earth Busbar running across the whole length of the LT Panel with 2Nos. Studs at both the side-ends, Lifting arrangment/ Hooks at the Top, Wiring with Appropriate Size of Copper Industrial Cables, Black Painted Base Frame - 40x40x6MM MS Angle Frame, Cable glandes brass crommium plated of different sizes suitable for incoming & outgoing ACB and MCCB's; and fitted with following specified items:- |
| 70 | i) Incoming MCCB Thermal Based Release with Overload & Short-circuit Protections, Rating - 63 A FP 25kA with Aux. Contacts & Rotary Handle Mechanisms-01 No. ii) 440V AC TP MDXL type Heavy Duty low loss Capacitors in Cylindrical/ Square body of ratings-10kVAr x 4Nos.iii) 415V AC TP Microprocessor Based Intelligent PF Correction Relay/ Controller 4Stage with 3CT sensing capability iv) Capacitor Banks suitable for 10 KVARX4NosMCCB/MCB of suitable capacity and heavy duty contactor suitable for 10 KVAR Capacitor , with Damping Resistors & Block of Early Make Poles, & with Luminous type On/ Off Push Buttons & A/M Selector Switch (for Each Set) including regular cooling system and set of metering system as per manufacturer's recommendation. |
| 71 | Microprocessor based three phase electronic tamper proof, CT operated, energy meter for LT supply with optical communication port, accuracy class 0.5 voltage 3 x 240 V, 10 to 60 Amp conforming to IS: 13779,complete all as specified and directed by Engr-in- Charge |
| 72 | Street light timer complete fixed in steel sheet enclosure comprising of the following :-(a) MCB TPN 40 Amps, 10 KA - 01 Nos(b) Contactors 4 Pole 40 amps, 415 Volts - 01 Nos(c) Timer suitable to work on three phase having 24 hours segment - 01 No |
| 73 | Post top lantern light fitting for 45 Watt LED lamp complete With all accessories,complete all as specified and directed by Engr-in- Charge Make- WIPRO Cat Part No-LP02-501-XXX-57-XX or equivalent in Havells and Bajaj Please Enable Macros to View BoQ information |
| 74 | Post top lantern light fitting for 45 Watt LED lamp complete With all accessories,complete all as specified and directed by Engr-in- Charge Make- WIPRO Cat Part No-LP02-501-XXX-57-XX or equivalent in Havells and Bajaj Please Enable Macros to View BoQ information |
