|
| 1 | Table Bed Side as per this drwgFD/MAP/07 and specification as under:The overall dimensions as shown on drg. 18mm thick Prelaminated HDHMR board shall be used for fabrication of body. 12 mm thick prelaminated HDHMR board shall be used for back/bottom of drawer of Table bed side . 75 mm SS handle shall be used in drawer and cabinet. 2x (L Bihari) Hydraulic Hings SS shall be provided in cabinet. Telescopic channel shall be provided in drawer for smooth functioning. 2 mm thick PVC edging shall be fixed on edges of top/sides/cabinet dooretc and 0.8 mm thick PVC edging shall be used on sides of drawer with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. Hard nylon /PVC shoe 4 nos shall be provided to each table bed side. Table bed side shall be manufactured without pullout tray irrespective of what is shown on drg. Rest all as per drg or as directed by EIC. |
| 2 | Table Peg as per this drwgFD/MAP/11 and specification as under:All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Brown colour glass top of 12 mm thick duly polished shall be flushed on top with silicon gel irrespective of what is shown on drg as directed by EIC. Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg.one centre stiffner shall be provided on bottom side rail of table irrespective of what is shown on drg.All exposed wooden surfaces shall be high class glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 3 | Table dressing (Ladies dressing mirror) including stool,as per this drwg FD/MAP-II/07 and specification as under: All wood work shall be first class hard wood, TW . Top/side/drawer/bottom/back shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour /shades shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick prelaminated HDHMR board . 01 Nos Std quality magnetic catcher shall be provided to each shutters. S /S handle shall be provided to drawer / shutter as per approved sample .Heavy duty S/S Piano hinges shall be provide to each shutter .Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication of body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on inner sides of drawer with edge bander machine as directed by Engr-in-Charge. PVC beading 2 mm thick shall be provided to alround bottom of dressing. Cushion of stool dreesing shall be minimum 40 density with tapestry . Heavy duty revolving nylon double wheels( 4 Nos) shall be used at the bottom of stool as shown on drgAll exposed wooden surfaces shall be high glossy melamine polish. Rest all as shown on drg and as directed by EIC. |
| 4 | Bin linen multi purpose as per this drwgFD/E6/MAP/09 and specification as under: Top / Sides / Shutters / Drawers / bottom / partition shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade shall be approved by EIC/GE. Telescopic channelshall be provided to each drawer and bottom of drawer shall be made of 9 mm thick prelaminated HDHMR board . Std quality magnetic catcher shall be provided to each shutters. S/S handle shall be provided to shutter / drawer as per approved sample . 12mm thick prelaminated HDHMR board shall be provided on back side .4 Nos SS 202 grade legs of 4 inch height shall be provided in lieu of skirting/legs complete as directed by Engr-in-Charge. Heavy duty L bihari hudraulic hings std quality shall be provided to each shutter. Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on sides of drawer with edge bander machine as directed by Engr-in-Charge .Rest all All wooden surfaces / wood based materials shall be melamine polished with high class finish. Rest all as per drg or as directed by EIC. |
| 5 | Side Board as per this drwgFD-1112 and specification as under: Top / Sides / Shutters / Drawers / bottom / partition shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick prelaminated HDHMR board . Std quality magnetic catcher shall be provided to each shutters. S/S handle shall be provided to shutter / drawer as per approved sample . 12mm thick prelaminated HDHMR board shall be provided on back side .4 Nos SS 202 grade legs of 4 inch height shall be provided in lieu of skirting/legs complete as directed by Engr-in-Charge. Heavy duty L Bihari hydraulic hings std quality shall be provided to each shutter. Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on sides of drawer with edge bander machine as directed by Engr-in-Charge .Rest all All wooden surfaces / wood based materials shall be melamine polished with high class finish. Rest all as per drg or as directed by EIC. |
| 6 | Sofa Set 5 seater as per this drwgFD-281 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973.Cushion for seat & back shall be 100mm thick PU foam minimum 40 density coverd with good quailty, tapestry cloth . PVC shoe shall be proveded to each legs.All wooden portion shall be smoothened to apply best quality melamine polish glossy finish with spray machine. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC |
| 7 | Sofa Set 4 seater as per this drwgFD-281 and specification as under: All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973.Cushion for seat & back shall be 100mm thick PU foam minimum 40 density coverd with good quailty, tapestry cloth . PVC shoe shall be proveded to each legs. 4x single seater shall be supplied .All wooden portion shall be smoothened to apply best quality melamine polish glossy finish with spray machine. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC. |
| 8 | Teapoy as per this drwg FD-382 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed alround with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. Right bracket/ connecter shall be secrewed to the each legs . Hard nylon shoe / buffers shall be provided to each leg. Top side rail and center stiffner shall be provided to each teapoy irrespective of what is shown on drg as directed by EIC.All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 9 | Chair dining offrs as per this drwg FD/MAP-II/04 and specification as under: Timber shall be first class teakwood , seasoned free from knots & cracks with moisture content permissible limit as per IS-281-1973. Seat shall be made out of 75mm thick PU foam 40 density pasted with adhesive on 12mm thick BWR grade plywood covered with fabric/tapestry . PVC rings shall be screwed to each legs. Fabrication of seat shall be done at BSO Yard. All wooden portion shall be smoothened to apply best quality melamine polish glossy finish with spray machine. Right angle bracket/connecter shall be provided to each legs.Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC. |
| 10 | Table centre as per this drwgFD/MAP/08 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Brown colour glass top of 12 mm thick duly polished shall be flushed on top with silicon gel irrespective of what is shown on drg as directed by EIC. Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg.All exposed wooden surfaces shall be high class glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 11 | Table with drawer wooden (900mmx600mmx760mm) as per this drwgFD-283 and specification as under: The overall size of table shall be of 900mmx600mmx760 mm. All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed alround with strong bonded chemical adhesive through hot pressed machine complete .telescopic channel shall be provide in drawer for smooth functioning with std quality SS locks.Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg.All exposed wooden surfaces shall be high class glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 12 | Table Writing as per this drwgFD-275 and specification as under: All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973. Top/cabinet/drawer shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed alround with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. Right bracket/ connecter shall be secrewed to the each legs . Hard nylon shoe / buffers shall be provided to each leg. 0.8 mm thick PVC edging shall be used on sides of drawer and bottom of drawer/back of cabinet shall be made of 9 mm thick Prelaminated HDHMR board . Telescopic channel shall be used for smooth functioning . irrespective of what is shown on drg Magenetic catcher shall be used in place of lock in shutter. wooden recessed handle shall be provided to drawer/shutter. All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 13 | Table Dining 6 pers as per this drwgFD/MAP-II/03 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed alround with strong bonded chemical adhesive through hot pressed machine complete . Hard nylon shoe / buffers shall be provided to each leg. what is shown on drg the top shall be fixed on top of table. All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 14 | Table Dining 4 pers as per this drwgFD/MAP-II/03 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of fixed alround with strong bonded chemical adhesive through hot pressed machine complete . Hard nylon shoe / buffers shall be provided to each leg. what is shown on drg the top shall be fixed on top of table. All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 15 | Table Dressing Gents as per this drwgFD-230 and specification as under: All wood work shall be first class hard wood, TW . Top/side/drawer/bottom/back shall be made of 16 mm thick plywood BWP grade with 1 mm thick laminate both side colour /shades shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick BWR ply with 1 mm thick laminate . 12 mm thick plywood with both side laminate shall be used in back of table dressing box . S /S handle shall be provided to drawer as per sample kept in BSO yard.Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication of body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick pvc eadging shall be provided on inner sides of drawer with edge bander machine as directed by Engr-in-Charge. All exposed wooden surfaces shall be high glossy melamine polish. 5 mm thick mirror shall be used . Fixing of table dressing shall be done by the contractor . Rest all as shown on drg and as directed by EIC. Please Enable Macros to View BoQ information |
