|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER, CHENNAI Name of Work: REPAIRS/MAINT AND REPLACEMENT OF GEYSERS, CEILING FANS AND EXHAUST FANS AND CONNECTED ACCESSORIES INSTALLED AT C & E AREA UNDER GE CHENNAI Contract No: GE / CHE / OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | FANSDismantling and Taking down the following types of fans for carrying out servicing and repairs such as cleaning and application of lubricants / grease etc including replacement of defective spare parts and replacing consumables such as cotter pins, bolts and nuts, mounting clamps / bushes and painting of fans with two coats of synthetic enamel paints using spray paints after filling of cavities and writing of SM/MES NO including refixing of fans, connecting with twin flexible cord from ceiling rose to fan connector terminal and testing complete all as specified and as directed.Note :-(i) Spares required will be measured and paid under relevant items(ii) The rate quoted deemed to be inclusive of cost of consumables. |
| 3 | Ceiling Fan 1200 mm/1400 mm sweep |
| 4 | Exhaust Fan 200/300/450 mm sweep |
| 5 | Wall mounting Fans 450 mm sweep |
| 6 | Supply only the following spares suitable for ceiling fan 1200 mm/1400 mm sweep |
| 7 | Bearing |
| 8 | Steel shaft |
| 9 | Fan canopy bottom and top |
| 10 | Fan capacitor 2.5 to 4 Mfd |
| 11 | Clamp for capacitor |
| 12 | M&L for rewinding of ceiling fan 1200/1400 mm with super enamelled copper winding wire of suitable gauge and applying varnish wih suitable class of insulating varnish complete with all winding materials , including testing complete to get desired speed all as specified and as directed. |
| 13 | M&L for rewinding of Exhaust fan up to 300 mm with super enamelled copper winding wire of suitable gauge and applying varnish wih suitable class of insulating varnish complete with all winding materials , including testing complete to get desired speed all as specified and as directed. |
| 14 | M&L for rewinding of Exhaust fan 450 mm with super enamelled copper winding wire of suitable gauge and applying varnish wih suitable class of insulating varnish complete with all winding materials , including testing complete to get desired speed all as specified and as directed. |
| 15 | M&L for rewinding of wall fan up to 400 mm with super enamelled copper winding wire of suitable gauge and applying varnish wih suitable class of insulating varnish complete with all winding materials , including testing complete to get desired speed all as specified and as directed. |
| 16 | S&F in repairs cable twin core 1 sqmm copper conductor flexible wire for connecting the fan from ceiling rose and testing complete including taking down unsv cable all as specified and as directed. |
| 17 | S&F in repairs condenser 2.5 /3.15 Mfd capacity suitable for 1200/1400 mm sweep ceiling fan for any make/type and fans including taking down unsv condensor all as specified and as directed. |
| 18 | S&F in repairs condenser 4 Mfd capacity suitable for exhaust fan up to 450 mm sweep for any make/type and fans including taking down unsv condensor all as specified and as directed. |
| 19 | S&F in repairs for fan mounting clamps alongwith rubber bush reel type with bolts and nuts suitable for 1200/1400 mm sweep ceiling fans of any make / type including taking down unsv bushes/clamps all as specified and as directed. |
| 20 | S&F in repairs for cotter pins, bolts and nuts complete including taking down unsv cotter pins all as specified and as directed. |
| 21 | S&F in repairs for down rod 15mm bore up to 50 cm length made out of Galvanised iron, with complete provision for hanging ceiling fan including cutting/threading provision at both ends and making suitable holes for inserting split pins/cotter pins including suitable check nuts and painting of fans with two coats of synthetic enamel paints using spray paints complete all as specified and as directed |
| 22 | S&F in repairs for down rod 15mm bore up to 200 cm length made out of Galvanised iron, with complete provision for hanging ceiling fan including cutting/threading provision at both ends and making suitable holes for inserting split pins/cotter pins including suitable check nuts and painting of fans with two coats of synthetic enamel paints using spray paints complete all as specified and as directed |
| 23 | S&F in repairs louvers made out of plastic body suitable for up to 450 mm sweep exhaust fan complete including taking down unsv louvers all as specified and as directed |
| 24 | S&F in repairs for fastener 4 \\" suitable for fixing of exhaust fan on wall and ceiling fan on roof complete including taking down unsv fastener all as specified and as directed |
| 25 | GEYSERSM&L for disconnecting electrical and water connection from geyser, dismantling and taking down geyser of capacity up to 50 ltrs and carrying out repair such as cleaning and descaling of inner tank , and servicing the geyser complete by replacing the defective spares and accessories including replacement of plumbing accessories complete including painting of geyser with two coats of synthetic enamel paint using spray gun and writing SM/MES No , and re- assembling, re fixing with by replacing corroded/wornout mounting bolts , connecting with 3 core flexible copper cable 2.5 sqmm with 15 Amp Plug top, testing completion all as specified and as directed . Note :-(i) Spares and accessories will be measured and paid under relevant items. (ii) The rate deemed to be inclusive of consuamble such as fixing screw, washers etc. |
| 26 | Supply only the following items suitable for geyser of capacity up to 50 ltrs |
| 27 | Heating element 1.5/2 kw |
| 28 | Inner Tank made out of stainless steel |
| 29 | Outer cover |
| 30 | Thermostat |
| 31 | Air pressure release safety valve |
| 32 | Bottom cover and Top cover |
| 33 | Mounting assembly for thermostat and heating element including cover |
| 34 | Glass wool |
| 35 | PVC Hot water flexible pipe up to 450 mm length |
| 36 | PVC cold water flexible pipe up to 450mm length |
| 37 | S&F in repairs for Heating element 1.5 KW capacity suitable for 25 litres capacity geyser of any type and description including taking down unsv complete all as specified and as directed. |
| 38 | S&F in repairs for Heating element 2 KW capacity suitable for 50 litres capacity geyser of any type and description including taking down unsv complete all as specified and as directed. |
| 39 | S&F in repairs for thermostat automatic cut off with ISI mark capacity suitable for up to 50 litres capacity geyser of any type and description including taking down unsv complete all as specified and as directed. |
| 40 | S&F in repairs for phase indicating neon lamp round type or rectangular type suitable for AC, single phase 230 volts suitable for geysers up to 50 Ltrs capacity including taking down unserviceable complete all as specified and as directed.Note: Pair of green ad red colour lamps shall be measured as one unit. |
| 41 | S&F in repairs for heavy duty connection pipe / stainless steel connection pipe for Hot water connection 450 mm long complete, including taking down unserviceable complete all as specified and as directed. |
| 42 | S&F in repairs for cold water Pipe , steel guarded PVC connection PTMT 450mm length with self locking nut at both ends, including taking down unserviceable complete all as specified and as directed. |
| 43 | S&F for Non return valve 15mm bore in gun metal and conforming to relevant IS specification including taking down unserviceable complete all as specified and as directed. |
| 44 | S&F for 2.5 sqmm 3 core copper flexible cable connection for geyser to socket complete and including taking down of old damaged/unserviceable complete all as specified and as directed. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
