|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to outside MD Land. |
| 2 | M & L for precast cement concrete solid building blocks or slabs 10cm thick with plain or interlocking joints with PCC type C1 1:3:6 using 20mm graded stone aggregate setting in mortar 1:4 in walls, complete all as specified and directed. |
| 3 | M& L for Pre-cast cement concrete block masonry with type C1 (1:3:6) using 20 mm graded stone aggregate solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed. |
| 4 | M & L for Rendering 10 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 surface finished even & smooth without using extra cement complete all as specified. |
| 5 | M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement with using WPC complete all as specified. (WPC shall be measured and paid separately). |
| 6 | Supply only integral water proofing liquid complete all as specified and as directed. |
| 7 | M&L for applying two coats of Oil bound distemper on walls including reparation of new plastered surfaces over a coat of primer complete all as specified and as directed. |
| 8 | Preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 9 | M&L for Precast reinforced cement concrete 1:2:4 mix, type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, as in platforms, shelves etc all as specified and directed. |
| 10 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 11 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed. |
| 12 | M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade incl screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM (1:4) etc complete all as specified. |
| 13 | M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations |
| 14 | Supplying and laying of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches including cutting holes in walls and making good with CM (1:3) where required and taking down old tubing of any description complete all as specified and as directed. |
| 15 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches including cutting holes in walls and making good with CM (1:3) where required and taking down old tubing of any description complete all as specified and as directed. |
| 16 | S&F Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including tank nipple and lid complete all as specified and as directed. |
| 17 | S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms etc complete all as directed. |
| 18 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends suitable for CPVC pipe incuding connecting socket all as specified and directed. |
| 19 | S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm→ |
| 20 | S&F Waste coupling of 32 mm PTMT for glazed ware basins/urinals with long screwed shanks and fly-nuts etc complete all as specified and directed. |
| 21 | M & L in for high density pipe 40 mm dia (HDPE) pressure rating 6 Kg / Sqcm fixed to wall and floors etc all as specified and as directed. |
| 22 | Cutting holes into or through brick walls not exc 150 sqcm built in cement mortar and stone walls and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required |
| 23 | Demolition of Plain cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 24 | M& L for 75 mm thick Plain Cement concrete Type D2 1:4:8 (40 mm graded Aggregate) as in sub base flooring complete all as specified and as directed. |
| 25 | M&L 25 mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finish concrete complete all as specified and as directed. |
| 26 | M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in Apoxy Grout 2 to 3 mm spacer and filled with white cement mixed with matching pigment over and including 20 mm thick screed bed in CM 1:6 all as specified. |
| 27 | M & L for rendering 10 mm thick in cement mortar 1 : 4 on brick or concrete surfaces as in screed bed all as specified and as directed. |
| 28 | Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600X300X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed. |
| 29 | S & F in repair PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and as directed |
| 30 | S & F in PVC (SWR) bend of 75 mm dia . |
| 31 | S&F in 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed |
| 32 | S&F in CP Bib taps 15 mm cast copper alloy fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule etc complete all as specified. |
| 33 | S&F of Structural Steel work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , vertical posts, etc fixed with angle cleats or other connecting plates, cleats etc. using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240 or with holow structural steel sections conforming to IS 4923-1997 Grade St-240 all as specified and directed. |
| 34 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed. |
| 35 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer on Surfaces of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 37 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 38 | S&F 100mm stainless steel butt hinges, cold rolled medium weight |
| 39 | M & L for Brass handles, cast type, polished bright 150 mm long all as specified and directed |
| 40 | S & F of 125 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified. |
| 41 | S&F of 100mm Aluminum anodised barrel tower bolts of extruded section complete all as specified. |
| 42 | S&F Brass Locks cupboard grade I, size 50 mm brass 4 levers Please Enable Macros to View BoQ information |
| 43 | S&F Brass Locks cupboard grade I, size 50 mm brass 4 levers Please Enable Macros to View BoQ information |
