|
| 1 | Fitting one Additional V cross arm in existing single pole incl. conveyance of materials. |
| 2 | Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials. |
| 3 | Additional rate for providing one disc set on any type of HT pole for making cut point. |
| 4 | Fitting one additional HT pin with insulator |
| 5 | Fitting one additional F top bracket |
| 6 | Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 7 | Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. |
| 8 | Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. |
| 9 | Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc. |
| 10 | Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. |
| 11 | Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits. |
| 12 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. |
| 13 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock. |
| 14 | Additional rate for excavation of Pit for A type pole in Hard Laterite. |
| 15 | Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling. |
| 16 | Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling. |
| 17 | Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite. |
| 18 | Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite. |
| 19 | Reshackling one span LT 3ph 4 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance. |
| 20 | Reshackling one span LT OH Addl conductor, replacing insulators, tightening stay, cutting tree branches incl. conveyance. |
| 21 | Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole. |
| 22 | Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 23 | Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. |
| 24 | Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 25 | Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 26 | Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion. |
| 27 | Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm |
| 28 | Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable |
| 29 | Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 30 | Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification). |
| 31 | Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking. |
| 32 | Stringing of 11KV, 99sqmm, XLPE covered conductor including fitting of all accessories, providing end terminations, midspan joints, pipe earthing, installing insulated piercing connectors etc. |
| 33 | Providing Cable Tie |
| 34 | Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. |
| 35 | Quoted Amount as per BOQ 1 |
| 36 | GST amount in Percentage Please Enable Macros to View BoQ information |
