|
| 1 | Steel work in built up round, square or rectangular/angular sections including cutting, punching, hoisting, fixing in position and welding/bolting with special shaped GI nut and bolts with steel and bitumen washers etc.complete job.Manufacturers: TATA, Jindal, Apollo, JSW, SAIL |
| 2 | Providing and fixing M.S tubular frames for doors, windows, ventilators and cupboard with rectangular /L-type sections, made of 1.60 mm thick M.S Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of C.C. 1:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) . |
| 3 | Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved srfaces, excluding the cost of p/-urlins, rafters and trusses and including cutting to size and shape wherever required. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases etc |
| 6 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 7 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 8 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 9 | Engagement of labour for making dining table/ wardrobes with materials available in store. |
| 10 | Carpenter Ist Class |
| 11 | Helper |
| 12 | Supply of 18 mm plywood Water resistant marine club of approved brand and design |
| 13 | Supply of Sunmica of approved brand and design |
| 14 | Carriage of Cement by MT from Ganderbal to Dumail |
| 15 | 15mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 16 | Carriage of metal, sand and bajri by head load for an avg lead of 5 km. |
| 17 | Carriage of cement and other material by head load from dumping site at Lower HolyCave store to Site of execution at Lower HolyCave including loading of cement at Baltal store and unloading of the same at Lower HolyCave Please Enable Macros to View BoQ information |
