Tender For Annual Maintenance Of 4 Mgd Water Treatment Plant Pokhribal Stage Contract For 2026-27 (Under M&R), Srinagar-Jammu And Kashmir

TDR : 55064110

Tender Notice
BOQ

5 Days Left

Srinagar , Jammu And Kashmir

Tender Brief : Tender For Annual Maintenance Of 4 Mgd Water Treatment Plant Pokhribal Stage Contract For 2026-27 (Under M&R)

Document Fees
₹ 350 /-

EMD
₹ 14000.0 /-

Tender Value
₹ 7 Lakhs /-

Submission Date
20-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Maintenance/servicing of sluice/butterfly/gate Valves by way of dismembering of sluice/butterfly/gate assembly, replacement of worn out nuts and bolts by new nut bolts if required and replacement of worn out parts by new ones if required at site incl. greasing , etc all complete . The entire assembly is to be re-fixed in its original position after carrying out necessary repairs. The job includes all carriages of materials, tools and plants and shall be paid in fitted and fixed form after testing on full water load and successful commissioning. Complete job. i. 450 mm dia sluice valve.
2	ii. 350 mm dia sluice valve.
3	iii. 350 mm dia butterfly valve.
4	iv. 300 mm dia sluice valve.
5	v. 300 mm dia butterfly valve.
6	vi. 200 mm dia sluice valve.
7	vii. 150 mm dia sluice valve.
8	viii. 150 mm dia butterfly valve.
9	ix. 100 mm dia sluice / gate valve.
10	Repairs/rethreading/replacement of sluice rod / spindal rod made out of mild steel and providing of new check nut made of gun metal, replacement of worn out nuts and bolts by new nuts and bolts if required and replacement of worn out parts by new ones if required at site incl. all complete . The entire assembly is to be re-fixed in its original position after carrying out necessary repairs. The job includes all carriages of materials, tools and plants and shall be paid in fitted and fixed form after testing on full water load and successful commissioning. Complete job.i. 450 mm dia sluice valve.
11	ii. 350/300 mm dia sluice valve.
12	iii. 350/300 mm dia butterfly valve.
13	iv. 200/150 mm dia sluice valve.
14	v. 150 mm dia butterfly valve.e
15	vi. 100 mm dia sluice / gate valv
16	Repairs/rethreading/replacement of sluice rod /horn gears assembly spindal rod made out of mild steel and replacement of worn out nuts and bolts by new nuts and bolts if required and replacement of worn out parts by new ones if required at site incl. all complete. The entire assembly is to be re-fixed in its original position after carrying out necessary repairs. The job includes all carriages of materials, tools and plants and commissioning. Complete job i. 450 mm dia sluice valve.
17	ii. 350 mm dia sluice valve.
18	iii. 350 mm dia butterfly valve.
19	iv. 300 mm dia sluice valve.
20	v. 300 mm dia butterfly valve.
21	vi. 200 mm dia sluice valve.
22	vii. 150 mm dia sluice valve.
23	viii. 150 mm dia butterfly valve.
24	ix. 100 mm dia sluice / gate valve.
25	Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new check worn gear box nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle and check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job).i. 450 mm dia sluice valve.
26	ii. 350/300 mm dia sluice valve.
27	iii. 350/300 mm dia butterfly valve.
28	iv. 200/150 mm dia sluice valve.
29	v. 150 mm dia butterfly valve.
30	vi. 100 mm dia sluice / gate valve.
31	Supplying and laying of filter sand appropriate grade (filter media to be selected by engineer incharge ) as annual replenishment of upper sand layer necessitated by regular back washing
32	Periodic desilting of various structures like mechanical sump, aerator, clarifloculator, ACC, clear water sump, service reservoir etc .i. Removing of silt deposits by rope and bucket / washout and stacking of the same for taking measurements in semi dry conditions including all kinds of dewatering and disposal of same within a lead of 1 Km.
33	ii. Scratching of walls and bed including disinfection by way of washing of same with disinfecting material ( bleaching powder ) excluding the cost of bleaching powder.
34	Servicing/maintenance of pumps / motors by way of providing coupling, washers, includings testing, commissioning all carriages, handling, re-handling , oiling, greasing, change of oil etc all complete job.i. 7.5 HP submersible pumps of ACC
35	ii. 2 HP motors of churners of clarifloculator
36	iii. 5 HP motor of clarifloculator
37	iv. 2 HP motors of booster pumps
38	v. 3 HP Dewatering pump
39	vi. 40 HP Back wash pumps
40	vii. 1 HP motor for polyelectrolyte
41	viii. 2 HP motors of booster pumps
42	ix. 15 HP open well submersible pump
43	Repairing of pumps / motors by way of rewinding, including replacement of damaged parts required at site. Including testing commissioning all carriages , handling , re handling etc. all complete job.i. 7.5 HP submerssible pumps of ACC
44	ii. 2 HP motors of churners of clarifloculator
45	iii. 5 HP motor of clarifloculator
46	iv. 2 HP motors of booster pumps
47	v. 3 HP Dewatering pump
48	vi. 40 HP Back wash pumps
49	vii. 1 HP motor for polyelectrolyte
50	viii. 2 HP motors of booster pumps
51	ix. 15 HP open well submersible pump
52	Replacement of damaged Mechanical seal of motor of 7.5 HP submersible pump complete job including dissembling & reassembling of pump & carriage to & fro.
53	Replacement of damaged mechanical seal of motor of 7.5 HP submersible pump complete job including dissembling and reassembling of pump and carriage to & pro
54	Replacement of damaged 7.5 Hp Submersible Pumps of Activated Carbon Chamber by way of Providing & fixing of 3 phase 7.5 HP Open Well submersible type Pump (Discharge 1 cusec, Head 6-8 mtrs, SS/CI Impeller) of Darling/ KSG or equivalent brand complete with all necessary accessories for successful commissioning including all carriages.
55	Providing and fixing of running V-Belt of groove type for air blower, the job includes dismantling damages ones and fixing of new ones including successful testing, commissioning. All types of carriage complete.
56	Providing and installation of new 2 H.P Kirloskar/Crompton or equivalent brand (3 phase) booster pumps with motors (two in one) for post and pre chlorination including all necessary fittings required at site, incl. carriage all complete job. (mono block)
57	Providing and installation of 3 H.P kirloskar\/Crompton or equivalent brand dewatering pumps with motors including all necessary fittings required at site, incl. carriage all complete job. TENTATIVE RATE
58	Providing and installation of 2 H.P kirloskar\/crompton or equivalent brand motors including all necessary fittings required at site, incl. carriage all complete job. TENTATIVE RATE
59	Electrification work; repair for lightening system / street lights including replacement to damaged LED /Halogen bulb , MCCB , wire , refrigerator , blowers, fans etc. incl. carriage etc. complete job1. Replacement of damaged LED lamps ( 8 watt to 12 watt) Havells or equivalent brand
60	2. Repairing/overhauling of heating/lighting points incl replacement of damaged accessories (like socket, switch, wire etc.) if needed. (5 Ampere to 15 ampere).
61	3. Repairs/over hauling to Air blower (30 Kv, 40 HP) including dissembling and re-assembling of air blower, incl greasing, oiling etc complete job and replacement of damaged parts by new one as per requirement of site.
62	4. Replacing of damaged wire of copper make (Havels) along with necessary accessories like connectors, nut bolts/ cable holders etc. Complete job.a. 1.5 sq.mm wire
63	b. 6 sq.mm wire
64	c. 4 sq.mm double core DC wire
65	d. 6 sq.mm double core DC wire
66	e. 12mm2 double core DC Wire
67	f. 35 mm 4 core aluminium cable
68	g. 50 mm 4 core aluminium cable
69	h. 70 mm 4 core aluminium cable
70	i. 120mm 4core aluminium cable
71	5. Repairing / overhauling of street / flash / flood lights incl. replacement of damaged parts. (30 watt to 60 watt)
72	6. Providing of MCCB (incl. fixing, carriage an all complete job) SCHNEIDER or equivalent branda. 200 Ampere
73	b. 63 Ampere
74	c. 32 Ampere
75	7. Repairs to fridge by way of replacement of any damaged part ( like motor or panel board, etc ) by new one as per requirement for making that functional.
76	8. Periodic servicing and maintenance of Acs
77	9. Charging of inverter battery including replacement of distilled water.
78	10. Providing of Electric blowers of zigma ( approved by site incharge)
79	11. Providing and fixing of below given items including all sorts of carriage, testing etc complete job a. Wall fans of standard size reputed make ISI marked incl all necessary fittings.
80	b. Exhaust fan of 450mmx450mm size reputed make ISI marked incl all necessary fittings
81	12. Providing and fitting of lights ( havels ) make for filtration plant incl. 3 core wiring , MCB and all other neccessary items like holders etc as per site requirement etc incl. All carriages upto site of work, complete job. (All accessories including lights to be of reputed make approved by site incharge)a. 30Watt flash / flood lights
82	b. 50Watt Street lights.
83	c. 12Watt Concealed lights.
84	13. Repairing of wall fans/ exhaust fans.
85	14. Servicing/maintenance/repairingof computer systems incl replacement of damaged parts if required for making the same functional.
86	15. Servicing/maintenance/repairing of 200/150 Ampere electric Servo including dissembling and assembling of same by chain pulley etc. including oiling, greasing etc, and replacement of damaged parts all complete incld. Testing & successful re-commissioning.
87	16. Providing and fixing of 2 HP 3-Phase star delta Starter (incl. fixing, carriage an all complete job ) havells incl carriage and MCBs all complete job.
88	17. Providing and fixing of 3 HP 3- Phase star Delta Starter (incl. fixing, carriage an all complete job ) havells incl carriage and MCBs all complete job
89	18. Providing and fixing of 10 HP dry Starter (incl. fixing, carriage an all complete job ) havels incl MCBS.
90	19. Providing and fixing of 400 ampere MCCB (incl. fixing, carriage an all complete job ) SCHNEIDER or equivalent brand incl. cost of thimbles etc all complete
91	20. Providing and fixing of 4-way relay (incl. fixing, carriage an all complete job ) SCHNEIDER or equivalent brand incl. cost of thimbles etc all complete.a. 25 ampere (415 V)
92	b. 2.5 ampere
93	21. Replacement of damaged 120/100 ampere batteries by new excide 150ampere batteries including testing etc. all complete.
94	22. Providing and fixing of 48 V solar adopter excide for making functional solar panel system including thimble connections etc. all complete job.
95	. 23. Providing of 20mm PVC Conduit unbreakable for Electric fitting.
96	24. Providing of 20mm PVC bends unbreakable
97	25. Providing of 4-way iron junction boxes
98	26. Providing of Tape Roll
99	27. Proving of Switch junction box size as per requirement.
100	28. Providing of SS combine socket/switch
101	29. Providing of 6 Amp 3 pin socket
102	30. Providing of Indicator of reputed make
103	31. Providing & successful installation of 400 Amp Change-Over of L&T or Equivalent make
104	32. Providing of Pure de-ionised distilled water bottle 1 ltr for inverter batteries
105	Repair of GYSER.i. Heating element aluminium made
106	ii. Thermo stat auto-cut
107	iii. Indicator lights
108	iv. Three pin plug 15 Ampere IS made
109	v. Copper wire 2.5 mm thick 2.00 meters
110	vi. Gyser botlt 4 No MS
111	vii. PVC coneection length 450 mm, 15mm
112	viii. Angle valve 15 mm of IS make
113	Repair of lawnmower by way of its minor parts and over all overhauling of the lawnmower.
114	Supply of various T&P Articles i. Pick axes
115	ii. Broomsrs
116	iii. Showel
117	iv. Garden Shears
118	Engagement of JCB with driver and oil.
119	Engagement of Hydra/Crane with driver and oil.
120	Dismantling and servicing of complete reduction gear unit of de-sludge bridges . The job includes costing of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacement of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage fro site of work upto workshop and back to site of work including testing & successful commissioning (complete job) Deductions on account of use of departmental men and machinery shall be as per actual.i. Flow regulating gates
121	ii. Churners
122	iii. Rotating bridge
123	Providing and fixing of gears made of brass material including all carriages etc. complete job for gear assembly.i. Churners
124	ii. Rotating bridge
125	Providing and fixing of splindle rod of cast iron steel/ MS as per requirement of site including all carriages etc complete job for gear assembly.i. Churners
126	P/F of kirloskar or equivalent brand complete gear box having gear of brass material including bearing etc all complete job for churners of clarifloculator ( suitable for 2 hp motors) incl carriage , greasing , oiling etc , including testing and successful commissioning complete job. as per the directions given by engineer incharge.
127	P/F of Redicon or equivalent brand complete gear box having gear of brass material including bearing etc all complete job for churners of clarifloculator ( suitable for 2 hp motors) incl carriage , greasing , oiling etc , including testing and successful commissioning complete job.
128	Provision for General servicing/ maintenance of 125 kva DG SET . (Crompton or equivalent brand) including replacement of lubricating oil filter , fuel filter , hose , hose clips , engine M .Oil , coolant , distilled water , labour charges for above items complete job
129	Providing, fixing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 6mm to 10mm thick MS. plate as per the requirement of site. This item includes cost of lead, spun yarn, R.I. cloth and lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof and should be painted with Anticorrosive Red Oxide Primer and incld. all carriages, leads lifts, etc. complete. (Subject to actual quantities during execution).
130	Plugging of multiple leakages inside the different water retaining structures at mechanical stage ist and 4 MGD WTP Pokhribal using grouting machine . The job includes chiselling around the leakage spot and temporarily packing of cavities after inserting the flexible pipe to make a way for water to come out and injecting the cement grout through the inserted pipe using grouting machine . The operation may be repeated to ensure the arrest of leakages . The item also includes hiring of grouting specialists and machine operators incl. hire charges of grouting machine unit incl its carriage upto the site of of work and incl the cost of water proofing chemicals/ compounds incl the cost of cement complete job.
131	Providing and fixing of 63 mm PPR gate valve incl. carriage and all complete job.
132	Supply and filling of 2nd class sand / stone dust around pipes at different spots including cost of material i.e. stone dust from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing and watering including compaction after each 15cms thickness in all respects. Complete Job. (Subject to actual quantities during execution).
133	Replacement of old worn out/damaged manually operated winches machines for M.S. Gates with new ones as per the directions of engineer incharge. This item includes cost of providing and fixing of new winches including fitting and all carriages up to site complete job. (Subject to actual quantities during execution).
134	Repairs to manually operated winch gates, trash guards by means of replacement of channels , M.S. Gates, Bearings including dismantling and refixing of the same as per the directions of engineer incharge. (Subject to actual quantities during execution).
135	Making crane of chlorination house functional by way of p/f of remote (10 bottons), MNx16 conductor 110v = 6 numbers, NONC 4 way = 6 nos , 2.5A relay = 3 nos , 415V fuse = 20 nos, sealing wire = 15 mtrs, including carriage , testing etc complete job
136	Providing and fixing of various accessories to gaseous chlorination plant including carriage and testing all complete job.i. manifold valve
137	ii. oxolire container valve with yolk
138	iii. copper connector
139	iv. cylinder key
140	Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand).
141	Structural steel work in welded built up sections for angles, channels, girders, gusset plates etc, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (welded or bolted). This item includes all carriages, charges of welder, equipments and machinery up to site for completion of job. (Subject to actual quantities during execution).
142	Providing and fixing of 7.5 HP star delta starter (incl fixing, carriage an all completer job) havells incl MCBS.
143	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
144	Providing and fixing of 12.5 HP star delta starter (incl fixing, carriage an all completer jo( havells incl MCBS.
145	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:i. All kinds of soil.
146	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: i. All kinds of soil.
147	Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : i. All kinds of soil.
148	ii. Ordinary or hard rock.
149	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (Subject to actual quantities during execution).
150	Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
151	Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):i. Depth not exceeding 1.5 m.
152	ii. Depth exceeding 1.5 m but not exceeding 3 m
153	iii. Depth exceeding 3 m but not exceeding 4.50 m
154	Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same in- All kinds of soil.
155	Providing and fixing of CCTV Camera (Night vision and 360 degree vision) at least 4 No within the premises of WTP Pokhribal of reputed make (Hikson, CP plus or equivalent brand) with all necessary accessories and cables as per the directions of Engineer in Charge
156	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
157	Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared
158	Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (Subject to actual quantities during execution).
159	Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.
160	Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: i. 1:3:6 or richer mix (i/c equivalent design mix)
161	ii. 1:4:8 or leaner mix (i/c equivalent design mix)
162	Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
163	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar.i. In mud mortar.
164	ii. In Cement mortar.
165	Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar.
166	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
167	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.
168	Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming. (Subject to actual quantities during execution).
169	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
170	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size.)
171	Providing and fixing of Daiken invertor 1 ton outdoor cooling AC PCB card as per the direction of Engineer Incharge, complete job
172	Providing and laying in position reinforced cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size crushed stone agg) excld. the cost of centering, shuttering and reinforced steel.) upto plinth level for saddle/anchor/thrust blocks. (Subject to actual quantities during execution).
173	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
174	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
175	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
176	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
177	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
178	Centring and shuttering including strutting, propping etc. and removal of form for:(Deductions on account of use of departmental men and machinary shall be as per actual)i. Foundations, footings, bases of columns etc. for mass concrete.
179	ii. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
180	iii. Suspended floors, roofs, landings, balconies and access platforms.
181	iv. Lintel, beams, plinth beams, girders, bressumers and cantilevers.
182	v. Columns, pillars, piers, abutments, posts and struts.
183	vi. Stairs (excluding landings) except spiral staircases.
184	Reinforcement for R.C.C. work including straightening cutting, bending, placing in position and binding all complete (TMT BARS) for saddle/anchor/thrust blocks. (Subject to actual quantities during execution).
185	Dry random rubble masonry with hard stone in foundation and plinth: (Nallah).Without bond stone.
186	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1.4 Cement mortar ( 1 cement : 4 coarse sand).
187	12mm Cement plaster finished with a floating coat of neat cement of mix: i. 1 : 4 ( 1 cement : 4 fine sand)
188	Welding of pipe / pipe fittings by way of engaging generator, welding set including all types of carriage involved. (Complete Job) (Subject to actual quantities during execution).
189	Dismantling of dislocated joints, repairs by way of welding of joints, flanged bends including cost of hire charge of DG set on vehicle including cost of equipment etc. complete.
190	Renewing glass panes, with putty and nails wherever necessary including raking out old putty : a. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
191	b. Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm)
192	Renewing glass panes, with wooden fillets wherever necessary : a. Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
193	b. Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm)
194	Supplying and fixing new wooden fillets wherever necessary : i. Hollock wood fillets.
195	Providing and fixing of 25mm thick shutters for cupboard etc, including nickel plated bright finished M.S piano hinges with necessary screws.i. 2nd class kailwood
196	Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead: I. Door chowkhats
197	II. Window chowkhats
198	III. Clerestory window chowkhats
199	Fixing chowkhat in existing opening in brick/RCC wall with dash fasteners/chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhats and 2 nos. on each vertical member of window chowkhats), including cost of dash fasteners/chemical fasteners.
200	Making the opening for door/window/clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground.
201	Providing joist (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete with : i. Sal wood
202	Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
203	Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.i. Internal Work- Exposed on wall
204	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : i. Of area of 3 sqm. and below
205	ii. Of area beyond 3 sqm.
206	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : i. Of area of 3 sqm. and below
207	ii. Of area beyond 3 sqm.
208	Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : i. Of sectional area 40 sqcm. and above
209	ii. Of sectional area below 40 sqcm.
210	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. i. For thickness of tiles 10 mm to 25 mm
211	ii. For thickness of tiles above 25 mm and upto 40 mm.
212	Clearing Snow (without frost) from Roads, manually:i. Snow depth upto 150 mm
213	ii. Snow depth over 150 mm but upto 250mm
214	iii. Snow depth over 250 mm but upto 350mm
215	iv. Snow depth over 350 mm but upto 450mm
216	Fixing of chain link fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. This item also includes carriage of chain link fencing from Divisional Store upto site of work.
217	Fixing charges of MS lids of different size for Sluice Chambers etc. including concreting, angle irons, locking arrangements, hinges etc. required for the completion of job. This item also includes carriage of lids from Divisional Store upto site of work.
218	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
219	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
220	White washing with lime to give an even shade : i. Old work (two or more coats)
221	Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.
222	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
223	Finishing walls with water proofing cement paint of required shade: i. Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
224	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. i. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter.
225	ii. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter.
226	iii. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter.
227	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
228	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete i. On steel work.
229	ii. On concrete work
230	Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm).
231	Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).i. Raj Nagar plain white marble/Udaipur green marble/zebra black marble a. (Area of slab upto 0.5 sqm)
232	b. (Area of slab over 0.5 sqm)
233	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. i. Marble Work.
234	ii. Granite Work.
235	Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
236	Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete.
237	Providing and fixing expansion hold fasteners on CC / R.C.C./brick masonry surface backing including drilling necessary holes and the cost of bolt etc. complete. Wedge expansion type i. Fastener with threaded dia 6mm
238	ii. Fastener with threaded dia 10mm
239	iii. Fastener with threaded dia 12mm
240	Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc, including priming coat complete: i. Second Class Kail Wood
241	Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete. i. Second class Deodar Wood a. 12 mm thick
242	b. 20 mm thick
243	c. 25 mm thick
244	d. 40 mm thick
245	Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures.
246	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
247	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): i. Second class kail wood
248	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). i. Second kail wood.
249	Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm i. With 2nd class teak wood 62x19 mm
250	Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. i. Second class Kail wood. (35mm thick).
251	Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: i. Panelled or paneled and glazed shutters: a. Second class kail wood
252	Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : i. Flat pressed 3 layer particle board or graded wood particle board IS:3087
253	ii. Pre-laminated with decorative lamination on both sides MDF board conforming to IS:14587.
254	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : i. Second class Kail wood (35mm thick).
255	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: i. 2nd class kail wood a. 50 x 12 mm
256	b. 50 x 20 mm
257	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete: i. 40 mm
258	ii. 50 mm
259	iii. 65 mm
260	iv. 75 mm
261	Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
262	Providing and fixing bright finished brass handles with screws etc. complete : i. 125 mm
263	ii. 100 mm
264	iii. 75 mm
265	Providing and fixing bright finished twin hanging type floor door stopper with necessary screws, etc. complete.
266	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. i. 125 mm
267	ii. 100 mm
268	iii. 75 mm
269	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
270	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : i. Kitchen sink with drain board a. 510x1040mm bowl depth 250mm
271	Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. a. 15 mm nominal dia
272	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: i. Flexible pipe a. 32 mm dia
273	b. 40 mm dia
274	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. i. External work including trenching, refilling etc. a. PN-16 pipe, 16mm OD (SDR-7.4)
275	b. PN-16 pipe , 20mm OD (SDR-7.4)
276	c. PN-16 pipe , 25mm OD (SDR-7.4)
277	d. PN-16 pipe , 32mm OD (SDR-7.4)
278	e. PN-16 pipe, 40mm OD (SDR-7.4)
279	f. PN-10 pipe , 50mm OD (SDR-11)
280	g. PN-10 pipe , 63mm OD (SDR-11)
281	Providing and fixing PPR Unions a. PPR Union 20mm
282	b. PPR Union 25mm
283	c. PPR Union 32mm
284	d. PPR Union 40mm
285	e. PPR Union 50mm
286	f. PPR Union 63mm
287	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. i. External work including trenching, refilling etc. a. 15mm nominal outer dia pipes.
288	b. 20mm nominal outer dia pipes.
289	c. 25mm nominal outer dia pipes.
290	. d. 32mm nominal outer dia pipes.
291	e. 40mm nominal outer dia pipes.
292	f. 50mm nominal outer dia pipes.
293	g. 50mm nominal outer dia pipes.
294	h. 75mm nominal outer dia pipes.
295	i. 100mm nominal outer dia pipes.
296	j. 150mm nominal outer dia pipes.
297	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Medium Class i. Internal work-Exposed on wall a. 15 mm dia. nominal bore
298	b. 20 mm dia. nominal bore
299	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. a. 15 mm and 20 mm dia. G.I. pipes
300	b. 25 mm and 32 mm dia. G.I. pipes
301	c. 40 mm and 50 mm dia. G.I. pipes
302	d. 65 mm and 80 mm dia. G.I. pipes
303	e. 100 mm and 150 mm dia. G.I. pipes
304	Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light Classa. 15 mm dia. nominal bore
305	b. 20 mm dia. nominal bore
306	c. 25 mm dia. nominal bore
307	d. 32 mm dia. nominal bore
308	e. 40 mm dia. nominal bore
309	f. 50 mm dia. nominal bore
310	g. 65 mm dia. nominal bore
311	h. 80 mm dia. nominal bore
312	i. 100 mm dia. nominal bore
313	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete a. 25 to 40 mm nominal bore
314	b. 50 to 80 mm nominal bore
315	Providing and fixing brass stop cock of approved quality. a. 15 mm nominal bore
316	b. 20 mm nominal bore
317	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) a. 25 mm nominal bore
318	b. 20 mm nominal bore
319	c. 32 mm nominal bore
320	d. 40 mm nominal bore
321	e. 50 mm nominal bore
322	f. 65 mm nominal bore
323	g. 80 mm nominal bore
324	Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead.a. 100 mm dia. pipe
325	b. 125 mm dia. pipe
326	c. 150 mm dia. pipe
327	d. 200 mm dia. pipe
328	e. 250 mm dia. pipe
329	f. 300 mm dia. pipe
330	g. 350 mm dia. pipe
331	h. 400 mm dia. Pipe
332	i. 450 mm dia. Pipe
333	Providing flanged joints to double flanged C.I. / D.I pipes and specials including testing to joints. a. 80 mm dia. pipe
334	b. 100 mm dia. pipe
335	c. 125 mm dia. pipe
336	d. 150 mm dia. pipe
337	e. 200 mm dia. pipe
338	f. 250 mm dia. pipe
339	g. 300 mm dia. pipe
340	h. 350 mm dia. pipe
341	i. 400 mm dia. pipe
342	j. 450 mm dia. Pipe
343	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. a. 32 mm nominal bore
344	b. 40 mm nominal bore
345	c. 50 mm nominal bore
346	d. 65 mm nominal bore
347	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) a. 15 mm nominal bore
348	b. 20 mm nominal bore
349	c. 25 mm nominal bore
350	d. 32 mm nominal bore
351	e. 40 mm nominal bore
352	f. 50 mm nominal bore
353	g. 65 mm nominal bore
354	Unloading and stacking of chemical procured from QCP&D Store a. Unloading
355	b. Stacking
356	Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . a. Medium shade using 50% white cement and 50% ordinary cement.
357	Providing, fixing of M.S flanges by welding including cost of cutting making both holes made out of 10/14mm thick M.S plate to the pipes of different dia’s and including cost of nuts, bolts, washers etc. (Complete Job).i. 80mm dia
358	ii. 100mm dia
359	iii. 150mm dia
360	iv. 200mm dia
361	v. 250mm dia
362	vi. 300mm dia
363	vii. 400mm dia
364	viii. 450mm dia
365	ix. 500mm dia
366	x. 600mm dia
367	xi. 700mm dia
368	xii. 750mm dia
369	xiii. 800mm dia
370	xiv. 900mm dia
371	Supply of fitter / labours. i. Fitter
372	ii. Asstt. Fitter
373	iii. Labour
374	iv. Motor mechanic/electrician
375	Supply of lead, spun Yarn, Fire Wood Kerosene including all carriages upto site of work.i. Lead
376	ii. Spun Yarn
377	iii. Fire Wood
378	iv. Kerosene
379	Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe).
380	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. i. 100 mm dia pipes
381	ii. 150 mm dia pipes
382	iii. 200 mm dia pipes
383	iv. 250 mm dia pipes
384	v. 300 mm dia pipes
385	vi. 350 mm dia pipes
386	vii. 400 mm dia pipes
387	viii. 450 mm dia pipes
388	ix. 500 mm dia pipes
389	x. 600 mm dia pipes
390	xi. 650 mm dia pipes
391	xii. 700 mm dia pipes
392	xiii. 800 mm dia pipes
393	xiv. 900 mm dia pipes
394	xv. 1000 mm dia pipes
395	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : i. 15 mm to 40 mm nominal bore.
396	ii. Above 40 mm nominal bore
397	Re-threading of damaged pipe ends including carriage from site to workshop and back.i. 20mm dia
398	ii. 25mm dia
399	iii. 40mm dia
400	iv. 50mm dia
401	v. 65mm dia
402	vi. 80mm dia
403	vii. 100mm dia
404	Supply of pipe specials from open market, if not available in the Divisional stores (available supplies if any has to be lifted from the Divisional Stores). of reputed make.i. 100mm dia GI Union
405	ii. 50mm dia GI Union
406	iii. 100mm dia GI Elbow
407	iv. 50mm dia GI Elbow
408	v. 100mm dia GI Equal Tee
409	vi. 50mm dia GI Equal Tee
410	vii. 100mm dia GI Nipple required length
411	viii. 50mm dia GI Nipple required length
412	ix. 32mm dia PPR NRV
413	x. 32mm PPR Female / Male Adopter
414	xi. 32mm dia PPR Ball Valve
415	Replacement / supply of PPR gate valves for bleaching / alum tank / foot valves (Prince pipes.)i. 20mm dia Gate Valve
416	ii. 25mm dia Gate Valve
417	iii. 32mm dia Gate Valve
418	iv. 40mm dia Gate Valve
419	v. 50mm dia Gate Valve
420	vi. 20mm dia PVC Pipe (B Class)
421	vii. 25mm dia PVC Pipe (B Class)
422	viii. 32mm dia PVC Pipe (B Class)
423	ix. 40mm dia PVC Pipe (B Class)
424	x. 50mm dia PVC Pipe (B Class)
425	Replacement of old damaged G.I. / C.I. Gate Valves / Sluice Valves by providing / fixing of new Gate Valves / Sluice Valves including cost of nuts, bolts,. Rubber insulations all carriages upto site of works complete.i. 100mm dia Gate Valve
426	ii. 80mm dia Gate Valve
427	iii. 65mm dia Gate Valve
428	iv. 50mm dia Gate Valve
429	v. 40mm dia Gate Valve
430	Fixing charges of Sluice Valve including testing, commissioning and carriages from Divisional Store to actual site of work, Complete job.i. 450mm dia Sluice Valve
431	ii. 400mm dia Sluice Valve
432	iii. 350mm dia Sluice Valve
433	iv. 300mm dia Sluice Valve
434	v. 200mm dia Sluice Valve
435	vi. 150mm dia Sluice Valve
436	vii. 125mm dia Sluice Valve
437	viii. 100mm dia Sluice Valve
438	ix. 80mm dia Sluice Valve
439	x. 50mm dia Sluice Valve
440	Providing of slowet vital chain block hoist 2 ton standard lifting height 6 meters running test load incl load chain having diameter 8 mm , weight 17.5 kg ( load chain : G80 chain , Hook : Deep forged high alloy steel, Gear : high standard gear steel , ) including carriage etc all complete job.
441	Providing of various necessary accessories including carriage etc. all complete job.a. Prodot Zebra ( laser toner powder ) ZEB - 1215 , ( 120 g ) HP A2 for HP laser Printer.
442	b. Epson ink 65 ml eco tank of epson printer ( colour as per requirement of printer)
443	c. Dr cartridge point compatible for technology 18 A / CF218A and 19A / CF219A Toner cartridge for Laser jet PRO M132a
444	d. Heavy duty blade for brush / grass cutter
445	e. Boston brush cutter 4 stroke (heavy duty + attachments) BC -139F having 3 point blade , 80 teeth blade, tap N go ( nylon wire ), safety belt , safety guard , manual , tool kiten selected item weight 9.8 kgs , dimensions 166L X 33W centimeters as per engineer incharge.
446	f. Restromatt Mistique Unbreakable Arm Plastic chair as per engineer incharge.
447	g. Esquire trofi plastic table 4 seater, cane matte surface having dimensions 114.5D X 74 W X 74H centimetres, rectangular as per engineer incharge.
448	h. Gauge books , testing report books / log books having dimensions 20cm x 30cm , including 100 leafs , including proper binding and printing as per engineer incharge all complete job.
449	i. paper rim (spectra copier paper ) A4
450	j. File covers.
451	k. Attendance register.
452	l. long classic copies
453	m. Thermocoal foam for mating as per engineer incharge 6 feet wide, 12 mm thick.
454	n. Excel for mating as per engineer incharge
455	o. Refilling of commercial cooking gas for cylinder. (19Kg.)
456	For day to day maintenance of plant.i. Rubber washers for regulating valves.
457	ii. Cleaning aids( cleaning wipers)
458	iii. Dhoti cloth big
459	iv. Duster cloth big
460	v. Floating material arrester( with steel net) complete
461	vi. Bamboo sticks 10feet length of specified dia to suite the handling requirement while cleaning the tanks /floculators.
462	ii. Plastic chappals
463	iii. Lubricating Oil
464	iv. Grease
465	v. Gear oil
466	vi. Stainless steel cotter pins (100/ 150/200mm long).
467	vii. 1.5 mm electric wire.
468	viii. Three Core 25mm Dia Wire.
469	ix. Two Core 16mm Dia Wire.
470	x. Screw Driver Set
471	xi. MS Winch Type Controlling Gates for distribution boxes & clarifloculator
472	ii. Grease Gun
473	iii. Rubber Coupling for 40HP Pumps
474	iv. Link set for main transformer
475	v. Bosch Rod for Mian Transformer
476	vi. Thimble different sizes
477	vii. Transformer Oil
478	viii. Fan Belt of Various sizes
479	ix. Winter Long Gum Boots
480	x. Battery acid
481	ii. Ring spanner set
482	iii. Plate spanner set
483	iv. Starter panel timer
484	v. Bolts/Nuts different sizes.
485	vi. Rubber Sheet 8mm.
486	vii. Locks
487	viii. Detol
488	ix. Slippers (Aqualite)
489	x. Hower wiper (Action ware)
490	xi. Dust bin large
491	xii. Brooms long type
492	xiii. Brooms short type
493	xiv. Long boots (water proof)
494	xv. Rubber pipe 20 mmØ
495	ii. Towel
496	iii. Harpic
497	iv. Soap
498	v. Gas regulator
499	vi. Gas pipe.
500	vii. Waste pipe

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Water Purification Tenders

Water Treatment Plant Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Annual Maintenance Of 4 Mgd Water Treatment Plant Pokhribal Stage Contract For 2026-27 (Under M&R), Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Annual Maintenance Of 4 Mgd Water Treatment Plant Pokhribal Stage Contract For 2026-27 (Under M&R), Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us